Tributylphosphine is the organophosphorus compound with the chemical formula P(CH2CH2CH2CH3)3, often abbreviated as PBu3. It is a tertiary phosphine. It is an oily liquid at room temperature, with a nauseating odor. It reacts slowly with atmospheric oxygen, and rapidly with other oxidizing agents, to give the corresponding phosphine oxide. It is usually handled using air-free techniques.

Tributylphosphine

  Phosphorus, P
  Carbon, C
  Hydrogen, H
Names
Preferred IUPAC name
Tributylphosphane
Other names
Tributylphosphine
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.012.410 Edit this at Wikidata
EC Number
  • 213-651-2
UNII
UN number 3254
  • InChI=1/C12H27P/c1-4-7-10-13(11-8-5-2)12-9-6-3/h4-12H2,1-3H3
    Key: TUQOTMZNTHZOKS-UHFFFAOYAQ
  • CCCCP(CCCC)CCCC
Properties
P(CH2CH2CH2CH3)3
Molar mass 202.322 g·mol−1
Appearance Colorless oily liquid
Odor Stench, nauseating
Density 0.82 g/ml
Melting point −60 °C; −76 °F; 213 K
Boiling point 240 °C; 464 °F; 513 K (150 °C (302 °F; 423 K) at 50 mmHg)
negligible
Solubility organic solvents such as heptane
Related compounds
Related
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Stench, Flammable, Corrosive
GHS labelling:
GHS02: FlammableGHS05: CorrosiveGHS07: Exclamation markGHS09: Environmental hazard
Danger
H226, H250, H251, H302, H312, H314, H411
P210, P222, P233, P235+P410, P240, P241, P242, P243, P260, P264, P270, P273, P280, P301+P312, P301+P330+P331, P302+P334, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P363, P370+P378, P391, P403+P235, P405, P407, P413, P420, P422, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
1
3
2
Flash point 117 °C (243 °F; 390 K)
168 °C (334 °F; 441 K)
Lethal dose or concentration (LD, LC):
750 mg/kg (oral, rats)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Preparation

edit

Tributylphosphine is prepared industrially by the hydrophosphination of phosphine with 1-butene: the addition proceeds by a free radical mechanism, and so the Markovnikov rule is not followed.[1]

PH3 + 3 CH2=CHCH2CH3 → P(CH2CH2CH2CH3)3

Tributylphosphine can be prepared in the laboratory by reaction of the appropriate Grignard reagent with phosphorus trichloride although, as it is commercially available at reasonable prices, it is rare to have to perform the small-scale preparation.

3 CH3CH2CH2CH2MgCl + PCl3 → P(CH2CH2CH2CH3)3 + 3 MgCl2

Reactions

edit

Tributylphosphine reacts with oxygen to give a phosphine oxide (here tributylphosphine oxide):

2 P(CH2CH2CH2CH3)3 + O2 → 2 O=P(CH2CH2CH2CH3)3

Because this reaction is so fast, the compound is usually handled under an inert atmosphere.

The phosphine is also easily alkylated. For example, benzyl chloride gives a phosphonium salt (here tributyl(phenylmethyl)phosphonium chloride):[2]

P(CH2CH2CH2CH3)3 + PhCH2Cl → [PhCH2P(CH2CH2CH2CH3)3]+Cl

Tributylphosphine is a common ligand for the preparation of complexes of transition metals in low oxidation states. It is cheaper and less air-sensitive than trimethylphosphine and other trialkylphosphines. Although its complexes are generally highly soluble, they are often more difficult to crystallize compared to complexes of more rigid phosphines. Furthermore, the 1H NMR properties are less easily interpreted and can mask signals for other ligands. Compared to other tertiary phosphines, it is compact (cone angle: 136°) and basic (χ-parameter: 5.25 cm−1)[3]

Tributylphosphine finds some industrial use as a catalyst modifier in the cobalt-catalyzed hydroformylation of alkenes, where it greatly increases the ratio of straight-chain aldehydes to branched-chain aldehydes in the product mixture.[4] However, tricyclohexylphosphine is even more effective for this purpose (although more expensive) and, in any case, rhodium catalysts are usually preferred to cobalt catalysts for the hydroformylation of alkenes.

It is the precursor to the pesticide (2,4-dichlorobenzyl)tributylphosphonium chloride ("Phosfleur").[2]

Although tributylphosphine is generally regarded as toxic, its biological effects can be manipulated by drug delivery strategies. For example, a photoactivatable version of tributylphosphine has been used to induce disulfide bond cleavage and reductive stress in living cells.[5]

Odor

edit

The main laboratory inconvenience of tributylphosphine is its unpleasant smell.

Hazards

edit

Tributylphosphine is moderately toxic, with an LD50 of 750 mg/kg (oral, rats).[2]

References

edit
  1. ^ Trofimov, Boris A.; Arbuzova, Svetlana N.; Gusarova, Nina K. (1999). "Phosphine in the synthesis of organophosphorus compounds". Russian Chemical Reviews. 68 (3): 215–227. Bibcode:1999RuCRv..68..215T. doi:10.1070/RC1999v068n03ABEH000464. S2CID 250775640.
  2. ^ a b c Jürgen Svara, Norbert Weferling and Thomas Hofmann "Phosphorus Compounds, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a19_545.pub2
  3. ^ Rahman, M. M.; Liu, H. Y.; Prock, A.; Giering, W. P. (1987). "Steric and Electronic Factors influencing Transition-Metal–Phosphorus(III) Bonding". Organometallics. 6 (3): 650–58. doi:10.1021/om00146a037.
  4. ^ Bell, P.; Rupilus, W.; Asinger, F. (1968). "Zur Frage der Isomerenbildung bei der Hydroformylierung Höhermolekularer Olefine mit Komplexen Kobalt- und Rhodiumkatalysatoren". Tetrahedron Lett. 9 (29): 3261–66. doi:10.1016/S0040-4039(00)89542-8.
  5. ^ Tirla, A.; Rivera-Fuentes, P. (2016). "Development of a Photoactivatable Phosphine Probe for Induction of Intracellular Reductive Stress with Single-Cell Precision". Angew. Chem. Int. Ed. 55 (47): 14709–14712. doi:10.1002/anie.201608779. hdl:20.500.11850/123593. PMID 27763731.
edit