Grignard reagents or Grignard compounds are chemical compounds with the general formula R−Mg−X, where X is a halogen and R is an organic group, normally an alkyl or aryl. Two typical examples are methylmagnesium chloride Cl−Mg−CH3 and phenylmagnesium bromide (C6H5)−Mg−Br. They are a subclass of the organomagnesium compounds.

Usually Grignard reagents are written as R-Mg-X, but in fact the magnesium(II) centre is tetrahedral when dissolved in Lewis basic solvents, as shown here for the bis-adduct of methylmagnesium chloride and THF.

Grignard compounds are popular reagents in organic synthesis for creating new carbon–carbon bonds. For example, when reacted with another halogenated compound R'−X' in the presence of a suitable catalyst, they typically yield R−R' and the magnesium halide MgXX' as a byproduct; and the latter is insoluble in the solvents normally used. In this aspect, they are similar to organolithium reagents.

Grignard reagents are rarely isolated as solids. Instead, they are normally handled as solutions in solvents such as diethyl ether or tetrahydrofuran using air-free techniques. Grignard reagents are complex with the magnesium atom bonded to two ether ligands as well as the halide and organyl ligands.

The discovery of the Grignard reaction in 1900 was recognized with the Nobel Prize awarded to Victor Grignard in 1912.

Synthesis edit

From Mg metal edit

Traditionally Grignard reagents are prepared by treating an organic halide (normally organobromine) with magnesium metal. Ethers are required to stabilize the organomagnesium compound. Water and air, which rapidly destroy the reagent by protonolysis or oxidation, are excluded.[1] Although the reagents still need to be dry, ultrasound can allow Grignard reagents to form in wet solvents by activating the magnesium such that it consumes the water.[2]

As is common for reactions involving solids and solution, the formation of Grignard reagents is often subject to an induction period. During this stage, the passivating oxide on the magnesium is removed. After this induction period, the reactions can be highly exothermic. This exothermicity must be considered when a reaction is scaled-up from laboratory to production plant.[3] Most organohalides will work, but carbon-fluorine bonds are generally unreactive, except with specially activated magnesium (through Rieke metals).

Magnesium edit

Typically the reaction to form Grignard reagents involves the use of magnesium ribbon. All magnesium is coated with a passivating layer of magnesium oxide, which inhibits reactions with the organic halide. Many methods have been developed to weaken this passivating layer, thereby exposing highly reactive magnesium to the organic halide. Mechanical methods include crushing of the Mg pieces in situ, rapid stirring, and sonication.[4]Iodine, methyl iodide, and 1,2-dibromoethane are common activating agents. The use of 1,2-dibromoethane is advantageous as its action can be monitored by the observation of bubbles of ethylene. Furthermore, the side-products are innocuous:

Mg + BrC2H4Br → C2H4 + MgBr2

The amount of Mg consumed by these activating agents is usually insignificant. A small amount of mercuric chloride will amalgamate the surface of the metal, enhancing its reactivity. Addition of preformed Grignard reagent is often used as the initiator.

Specially activated magnesium, such as Rieke magnesium, circumvents this problem.[5]The oxide layer can also be broken up using ultrasound, using a stirring rod to scratch the oxidized layer off,[6] or by adding a few drops of iodine or 1,2-Diiodoethane. Another option is to use sublimed magnesium or magnesium anthracene.[7]

"Rieke magnesium" is prepared by a reduction of an anhydrous magnesium chloride with an potassium:

MgCl2 + 2 K → Mg + 2 KCl

Mechanism edit

In terms of mechanism, the reaction proceeds through single electron transfer:[8][9][10]

 

Mg transfer reaction (halogen–Mg exchange) edit

An alternative preparation of Grignard reagents involves transfer of Mg from a preformed Grignard reagent to an organic halide. Other organomagnesium reagents are used as well.[11] This method offers the advantage that the Mg transfer tolerates many functional groups. An illustrative reaction involves isopropylmagnesium chloride and aryl bromide or iodides:[12]

i-PrMgCl + ArCl → i-PrCl + ArMgCl

From alkylzinc compounds (reductive transmetalation) edit

A further method to synthesize Grignard reagents involves reaction of Mg with an organozinc compound. This method has been used to make adamantane-based Grignard reagents, which are, due to C-C coupling side reactions, difficult to make by the conventional method from the alkyl halide and Mg. The reductive transmetalation achieves:[13]

AdZnBr + Mg → AdMgBr + Zn

Testing Grignard reagents edit

Because Grignard reagents are so sensitive to moisture and oxygen, many methods have been developed to test the quality of a batch. Typical tests involve titrations with weighable, anhydrous protic reagents, e.g. menthol in the presence of a color-indicator. The interaction of the Grignard reagent with phenanthroline or 2,2'-biquinoline causes a color change.[14]

Reactions of Grignard reagents edit

Grignard reagent reactions
Named after Victor Grignard
Reaction type Coupling reaction
Reaction
Carbon electrophiles
+
R-MgX
+
(H3O+)
Coupling Product

With carbonyl compounds edit

Grignard reagents react with a variety of carbonyl derivatives.[15]

 
Reactions of Grignard reagents with carbonyls

The most common application of Grignard reagents is the alkylation of aldehydes and ketones, i.e. the Grignard reaction:[16]

 
Reaction of CH3C(=O)CH(OCH3)2 with H2C=CHMgBr

Note that the acetal functional group (a protected carbonyl) does not react.

Such reactions usually involve an aqueous acidic workup, though this step is rarely shown in reaction schemes. In cases where the Grignard reagent is adding to an aldehyde or a prochiral ketone, the Felkin-Anh model or Cram's Rule can usually predict which stereoisomer will be formed. With easily deprotonated 1,3-diketones and related acidic substrates, the Grignard reagent RMgX functions merely as a base, giving the enolate anion and liberating the alkane RH.

Grignard reagents are nucleophiles in nucleophilic aliphatic substitutions for instance with alkyl halides in a key step in industrial Naproxen production:

 
Naproxen synthesis

Grignard reagents also react with many "carbonyl-like" compounds and other electrophiles:

 
Reactions of Grignard reagents with various electrophiles

Reactions as a base edit

Grignard reagents serve as a base for non-protic substrates (this scheme does not show workup conditions, which typically includes water). Grignard reagents are basic and react with alcohols, phenols, etc. to give alkoxides (ROMgBr). The phenoxide derivative is susceptible to formylation by paraformaldehyde to give salicylaldehyde.[17]

Alkylation of metals and metalloids edit

Like organolithium compounds, Grignard reagents are useful for forming carbon–heteroatom bonds.

 
Grignard reagents react with many metal-based electrophiles. For example, they undergo transmetallation with cadmium chloride (CdCl2) to give dialkylcadmium:[18]
2 RMgX + CdCl2 → R2Cd + 2 Mg(X)Cl

Schlenk equilibrium edit

Most Grignard reactions are conducted in ethereal solvents, especially diethyl ether and THF. Grignard reagents react with 1,4-dioxane to give the diorganomagnesium compounds and insoluble coordination polymer MgX2(dioxane)2 and (R = organic group, X = halide):

2 RMgX + dioxane ⇌ R2Mg + MgX2(dioxane)2

This reaction exploits the Schlenk equilibrium, driving it toward the right.

Precursors to magnesiates edit

Grignard reagents react with organolithium compounds to give ate complexes (Bu = butyl):[19]

BuMgBr + 3 BuLi → LiMgBu3 + BuBr

Coupling with organic halides edit

Grignard reagents do not typically react with organic halides, in contrast with their high reactivity with other main group halides. In the presence of metal catalysts, however, Grignard reagents participate in C-C coupling reactions. For example, nonylmagnesium bromide reacts with methyl p-chlorobenzoate to give p-nonylbenzoic acid, in the presence of Tris(acetylacetonato)iron(III) (Fe(acac)3), after workup with NaOH to hydrolyze the ester, shown as follows. Without the Fe(acac)3, the Grignard reagent would attack the ester group over the aryl halide.[20]

 
4-nonylbenzoicacid synthesis using a grignard reagent

For the coupling of aryl halides with aryl Grignard reagents, nickel chloride in tetrahydrofuran (THF) is also a good catalyst. Additionally, an effective catalyst for the couplings of alkyl halides is the Gilman catalyst lithium tetrachlorocuprate (Li2CuCl4), prepared by mixing lithium chloride (LiCl) and copper(II) chloride (CuCl2) in THF. The Kumada-Corriu coupling gives access to [substituted] styrenes.

Oxidation edit

Treatment of a Grignard reagent with oxygen gives the magnesium organoperoxide. Hydrolysis of this material yields hydroperoxides or alcohol. These reactions involve radical intermediates.

 

The simple oxidation of Grignard reagents to give alcohols is of little practical importance as yields are generally poor. In contrast, two-step sequence via a borane (vide supra) that is subsequently oxidized to the alcohol with hydrogen peroxide is of synthetic utility.

The synthetic utility of Grignard oxidations can be increased by a reaction of Grignard reagents with oxygen in presence of an alkene to an ethylene extended alcohol.[21] This modification requires aryl or vinyl Grignards. Adding just the Grignard and the alkene does not result in a reaction demonstrating that the presence of oxygen is essential. The only drawback is the requirement of at least two equivalents of Grignard although this can partly be circumvented by the use of a dual Grignard system with a cheap reducing Grignard such as n-butylmagnesium bromide.

 
Grignard oxygen oxidation example

Elimination edit

In the Boord olefin synthesis, the addition of magnesium to certain β-haloethers results in an elimination reaction to the alkene. This reaction can limit the utility of Grignard reactions.

 
Boord olefin synthesis, X = Br, I, M = Mg, Zn

Industrial use edit

An example of the Grignard reaction is a key step in the (non-stereoselective) industrial production of Tamoxifen[22] (currently used for the treatment of estrogen receptor positive breast cancer in women):[23]

 
Tamoxifen production

See also edit

Gallery edit

References edit

  1. ^ Goebel, M. T.; Marvel, C. S. (1933). "The Oxidation of Grignard Reagents". Journal of the American Chemical Society. 55 (4): 1693–1696. doi:10.1021/ja01331a065.
  2. ^ Smith, David H. (1999). "Grignard Reactions in "Wet" Ether". Journal of Chemical Education. 76 (10): 1427. Bibcode:1999JChEd..76.1427S. doi:10.1021/ed076p1427.
  3. ^ Philip E. Rakita (1996). "5. Safe Handling Practices of Industrial Scale Grignard Ragents" (Google Books excerpt). In Gary S. Silverman; Philip E. Rakita (eds.). Handbook of Grignard reagents. CRC Press. pp. 79–88. ISBN 0-8247-9545-8.
  4. ^ Smith, David H. (1999). "Grignard Reactions in "Wet" Ether". Journal of Chemical Education. 76 (10): 1427. Bibcode:1999JChEd..76.1427S. doi:10.1021/ed076p1427.
  5. ^ Rieke, R. D. (1989). "Preparation of Organometallic Compounds from Highly Reactive Metal Powders". Science. 246 (4935): 1260–1264. Bibcode:1989Sci...246.1260R. doi:10.1126/science.246.4935.1260. PMID 17832221. S2CID 92794.
  6. ^ Clayden, Jonathan; Greeves, Nick (2005). Organic chemistry. Oxford: Oxford Univ. Press. pp. 212. ISBN 978-0-19-850346-0.
  7. ^ Wakefield, Basil J. (1995). Organomagnesium Methods in Organic Chemistry. Academic Press. pp. 21–25. ISBN 0080538177.
  8. ^ Garst, J. F.; Ungvary, F. "Mechanism of Grignard reagent formation". In Grignard Reagents; Richey, R. S., Ed.; John Wiley & Sons: New York, 2000; pp 185–275. ISBN 0-471-99908-3.
  9. ^ Advanced Organic chemistry Part B: Reactions and Synthesis F.A. Carey, R.J. Sundberg 2nd Ed. 1983. Page 435
  10. ^ Garst, J.F.; Soriaga, M.P. "Grignard reagent Formation", Coord. Chem. Rev. 2004, 248, 623 - 652. doi:10.1016/j.ccr.2004.02.018.
  11. ^ Arredondo, Juan D.; Li, Hongmei; Balsells, Jaume (2012). "Preparation of t-Butyl-3-Bromo-5-Formylbenzoate Through Selective Metal-Halogen Exchange Reactions". Organic Syntheses. 89: 460. doi:10.15227/orgsyn.089.0460.
  12. ^ Knochel, P.; Dohle, W.; Gommermann, N.; Kneisel, F. F.; Kopp, F.; Korn, T.; Sapountzis, I.; Vu, V. A. (2003). "Highly Functionalized Organomagnesium Reagents Prepared through Halogen–Metal Exchange". Angewandte Chemie International Edition. 42 (36): 4302–4320. doi:10.1002/anie.200300579. PMID 14502700.
  13. ^ Armstrong, D.; Taullaj, F.; Singh, K.; Mirabi, B.; Lough, A. J.; Fekl, U. (2017). "Adamantyl Metal Complexes: New Routes to Adamantyl Anions and New Transmetallations". Dalton Transactions. 46 (19): 6212–6217. doi:10.1039/C7DT00428A. PMID 28443859.
  14. ^ Krasovskiy, Arkady; Knochel, Paul (2006). "Convenient Titration Method for Organometallic Zinc, Harshal ady Magnesium, and Lanthanide Reagents". Synthesis. 2006 (5): 890–891. doi:10.1055/s-2006-926345.
  15. ^ Henry Gilman and R. H. Kirby (1941). "Butyric acid, α-methyl-". Organic Syntheses; Collected Volumes, vol. 1, p. 361.
  16. ^ Haugan, Jarle André; Songe, Pål; Rømming, Christian; Rise, Frode; Hartshorn, Michael P.; Merchán, Manuela; Robinson, Ward T.; Roos, Björn O.; Vallance, Claire; Wood, Bryan R. (1997). "Total Synthesis of C31-Methyl Ketone Apocarotenoids 2: The First Total Synthesis of (3R)-Triophaxanthin" (PDF). Acta Chemica Scandinavica. 51: 1096–1103. doi:10.3891/acta.chem.scand.51-1096. Retrieved November 26, 2009.
  17. ^ Peters, D. G.; Ji, C. (2006). "A Multistep Synthesis for an Advanced Undergraduate Organic Chemistry Laboratory". Journal of Chemical Education. 83 (2): 290. Bibcode:2006JChEd..83..290P. doi:10.1021/ed083p290.
  18. ^ "Unit 12 Aldehydes, Ketones and Carboxylic Acids" (PDF). Chemistry Part II Textbook for class XII. Vol. 2. India: National Council of Educational Research and Training. 2010. p. 355. ISBN 978-81-7450-716-7. Archived from the original (PDF) on September 20, 2018. Retrieved March 9, 2019.
  19. ^ Arredondo, Juan D.; Li, Hongmei; Balsells, Jaume (2012). "Preparation of t-Butyl-3-Bromo-5-Formylbenzoate Through Selective Metal-Halogen Exchange Reactions". Organic Syntheses. 89: 460. doi:10.15227/orgsyn.089.0460.
  20. ^ A. Fürstner, A. Leitner, G. Seidel (2004). "4-Nonylbenzoic Acid". Organic Syntheses. 81: 33–42{{cite journal}}: CS1 maint: multiple names: authors list (link).
  21. ^ Youhei Nobe; Kyohei Arayama; Hirokazu Urabe (2005). "Air-Assisted Addition of Grignard Reagents to Olefins. A Simple Protocol for a Three-Component Coupling Process Yielding Alcohols". J. Am. Chem. Soc. 127 (51): 18006–18007. doi:10.1021/ja055732b. PMID 16366543.
  22. ^ Richey, Herman Glenn (2000). Grignard Reagents: New Developments. Wiley. ISBN 0471999083.
  23. ^ Jordan VC (1993). "Fourteenth Gaddum Memorial Lecture. A current view of tamoxifen for the treatment and prevention of breast cancer". Br J Pharmacol. 110 (2): 507–17. doi:10.1111/j.1476-5381.1993.tb13840.x. PMC 2175926. PMID 8242225.

Further reading edit

  • Rakita, Philip E.; Silverman, Gary S., eds. (1996). Handbook of Grignard Reagents. New York, N.Y: Marcel Dekker. ISBN 0-8247-9545-8.
  • Mary McHale, "Grignard Reaction," Connexions, http://cnx.org/content/m15245/1.2/. 2007.
  • Grignard knowledge: Alkyl coupling chemistry with inexpensive transition metals by Larry J. Westrum, Fine Chemistry November/December 2002, pp. 10–13 [1]

Specialized literature edit

  • Rogers, H. R.; Hill, C. L.; Fujiwara, Y.; Rogers, R. J.; Mitchell, H. L.; Whitesides, G. M. (1980). "Mechanism of formation of Grignard reagents. Kinetics of reaction of alkyl halides in diethyl ether with magnesium". Journal of the American Chemical Society. 102 (1): 217. doi:10.1021/ja00521a034.
  • De Boer, H.J.R.; Akkerman, O.S; Bickelhaupt, F. (1988). "Carbanions as intermediates in the synthesis of Grignard Reagents". Angew. Chem. Int. Ed. 27 (5): 687–89. doi:10.1002/anie.198806871.
  • Van Klink, G.P.M.; de Boer, H.J.R; Schat, G.; Akkerman, O.S.; Bickelhaupt, F.; Spek, A. (2002). "Carbanions as Intermediates in the Formation of Grignard Reagents". Organometallics. 21 (10): 2119–35. doi:10.1021/om011083a. hdl:1874/14334. S2CID 94556915.
  • Shao, Y.; Liu, Z.; Huang, P.; Liu, B. (2018). "A unified model of Grignard reagent formation". Physical Chemistry Chemical Physics. 20 (16): 11100–08. Bibcode:2018PCCP...2011100S. doi:10.1039/c8cp01031e. PMID 29620768.