X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-parameters are also referred to as the parameters of the Poly-Harmonic Distortion (PHD) nonlinear behavioral model.

Agilent engineer demonstrates X-parameter functionality at IEEE MTT-S International Microwave Symposium, Boston MA June 10, 2009.)

Description

edit

X-parameters represent a new category of nonlinear network parameters for high-frequency design (Nonlinear vector network analyzers are sometimes called large signal network analyzers.[1])

X-parameters are applicable to both large-signal and small-signal conditions, for linear and nonlinear components. They are an extension of S-parameters[2] meaning that, in the limit of a small signal, X-parameters reduce to S-parameters.

They help overcome a key challenge in RF engineering, namely that nonlinear impedance differences, harmonic mixing, and nonlinear reflection effects occur when components are cascaded under large signal operating conditions. This means that there is a nonlinear and as such non-trivial relationship between the properties of the individual cascaded components and the composite properties of the resulting cascade. This situation is unlike that at DC, where one can simply add the values of resistors connected in series. X-parameters help solve this cascading problem: if the X-parameters of a set of components are measured individually, the X-parameters (and hence the non-linear transfer function) can be calculated of any cascade made from them. Calculations based on X-parameters are usually performed within a harmonic balance simulator environment.[3]

Development

edit

X-parameters were developed and introduced by Keysight Technologies as functionality included in N5242A Nonlinear Vector Network Analyzer,[4][5] and the W2200 Advanced Design System in 2008. N5242A is a Keysight[6] product that were formerly part of Agilent.[7]

X-parameters are the parameters of the polyharmonic distortion modeling work of Dr. Jan Verspecht[8][9] and Dr. David E. Root.[9]

See also

edit

Notes

edit
  1. ^ Dr. Jan Verspecht (December 2005). "Large-Signal Network Analysis" (PDF). IEEE Microwave Magazine. 6 (4). IEEE: 82–92. doi:10.1109/MMW.2005.1580340. S2CID 23109051. Retrieved May 1, 2009.
  2. ^ "EDA Focus: May 2009, Transcript of interview of David E. Root by Microwave Journal Editor David Vye on April 16th, 2009". Microwave Journal. April 16, 2009. Retrieved May 4, 2009.
  3. ^ "Keysight NVNA & X-Parameters Simulation in ADS: The new paradigm for nonlinear measurements, modeling, and simulation with ADS (PDF, 1MB) on the X-Parameters MMIC Design Seminar page". Retrieved July 17, 2015.
  4. ^ "Agilent Technologies Announces Breakthrough in X-Parameter Nonlinear Model Generation for Components Used in Wireless, Aerospace Defense Industries: X-Parameters Enable Model Generation from Simulation or Measurement, for Fast Development". Keysight.com. December 17, 2008. Retrieved May 6, 2009.
  5. ^ "Keysight N5242A PNA-X Series Microwave Network Analyzer, 10 MHz to 26.5 GHz". Retrieved July 17, 2015.
  6. ^ "Electronic design, test automation and measurement equipment". Keysight Technologies.
  7. ^ "Agilent's Electronic Measurement business is now Keysight Technologies". Agilent Technologies.
  8. ^ Dr. Jan Verspecht (October 1996). "Black Box Modelling of Power Transistors in the Frequency Domain" (PDF). Conference Paper Presented at the INMMC '96, Duisburg, Germany. Retrieved May 6, 2009. (PDF, 85 KB)
  9. ^ a b Dr. Jan Verspecht; Dr. David E. Root (June 2006). "Polyharmonic Distortion Modeling" (PDF). IEEE Microwave Magazine. 7 (3). IEEE: 44–57. doi:10.1109/MMW.2006.1638289. S2CID 20488542. Retrieved May 6, 2009. (PDF, 2.4MB)
edit