Stale

Olympic Council of Asia

Article(s): Olympic Council of Asia

Request: Vectorize... Chris (クリス • フィッチュ) (talk) 18:15, 9 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

In the original, the text is the same width as the logo, not longer, can you fix that? --Chris (クリス • フィッチュ) (talk) 03:07, 10 March 2010 (UTC)[reply]
Look at the corner of http://www.ocasia.org/, their official website. It has the wider width. The SVG was extracted from an official source. I guess they have multiple configurations of the logo (since the png is also sourced from an official source), but since the main homepage has the longer text, perhaps we should use that one? -Andrew c [talk] 03:45, 10 March 2010 (UTC)[reply]
See page 11 of this official PDF source. So I think the version with the wider text would be more appropriate. --JovianEye (talk) 05:06, 10 March 2010 (UTC)[reply]
I think the wider text on the website version has more to do with the column width of the left-hand column than to the accuracy of the logo. I think the webpage designer has taken some artistic licence there. --Fred the Oyster (talk) 10:11, 10 March 2010 (UTC)[reply]

Article(s): Erlenmeyer flask

Request: Would it be feasible to create an image in a similar quality as in the case of the beakers? 89.217.130.227 (talk) 11:00, 6 March 2010 (UTC)[reply]

Graphist opinion(s):

Two standards of the State President

Article(s): South Africa

Request: please make SVGs Fry1989 (talk) 01:44, 18 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Rannpháirtí anaithnid. Turns out the "SVG" of the arms that is on the Commons is a 11 MB trace. Given the nature of the image, I would recommend a creating a print resolution PNG using the (relatively) hi-res GIF on the common. --RA (talk) 20:57, 18 March 2010 (UTC)[reply]

Two standards of the State President

Article(s): South Africa

Request: please make SVGs Fry1989 (talk) 01:44, 18 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Rannpháirtí anaithnid. Turns out the "SVG" of the arms that is on the Commons is a 11 MB trace. Given the nature of the image, I would recommend a creating a print resolution PNG using the (relatively) hi-res GIF on the common. --RA (talk) 20:57, 18 March 2010 (UTC)[reply]

Article(s): Lamborghini

Request: I tried to extract the logo from this official PDF, but the file size was a massive 5MB which made Inkscape on my system very sluggish. Could someone try and upload the vector version if it is feasible. JovianEye (talk) 23:21, 20 March 2010 (UTC)[reply]

I don't think this is going to work. The logo in that PDF is incredibly detailed; much more than is allowable by fair use. The SVG I managed to extract was 4 MB in size as well. I guess you can still export it as a reasonably sized PNG, though. Quibik (talk) 01:19, 21 March 2010 (UTC)[reply]
I'm currently trying to simplify it by expanding all the blends into gradients.Actually, I've already done that, but I'm waiting for Scour to optimise the resulting SVG. The web version seems to be barfing though, so tomorrow I'll install Python and run a local version of Scour on it. --Fred the Oyster (talk) 01:23, 21 March 2010 (UTC)[reply]

Graphist opinion(s):

Congo Free State

Article(s): Congo Free State

Request: vector version, please... Chris (クリス • フィッチュ) (talk) 01:40, 23 March 2010 (UTC)[reply]

Graphist opinion(s):

Squash racquet and WikiProject Squash barnstar

Article(s): Wikipedia:WikiProject Squash

Request: I need someone to create the wikiproject squash barnstar. I would also like someone to sketch or to create a squash racquet for the project usage. Thank you. Arteyu ? Blame it on me ! 23:14, 23 March 2010 (UTC)[reply]

Graphist opinion(s):

San Carlos seal

Article(s): San Carlos, California

Request: Please vectorize, you magical graphical gurus. :) Direct link to largest raster. Cybercobra (talk) 02:37, 23 March 2010 (UTC)[reply]

Graphist opinion(s):

I'd have a stab but I just can't see enough detail in the raster to be able to accurately replicate it. I'm afraid my old eyes are shot these days. --Fred the Oyster (talk) 02:46, 25 March 2010 (UTC)[reply]


Asia-Pacific Scout Region (World Organization of the Scout Movement)

Article(s): Asia-Pacific Scout Region (World Organization of the Scout Movement)

Request: really bad jpg artifacting... Chris (クリス • フィッチュ) (talk) 16:25, 24 March 2010 (UTC)[reply]

Graphist opinion(s):

British and Irish Lions 1924 crest

Article(s): British and Irish Lions

Request: Could you please convert this image to svg and add clarity to its components. The crest as uploaded currently, is under fair use because it is from a photograph published on a website. However, the crest itself would be in the Public Domain, having not been first published in the US, with UK and Irish copyright law applying, and the term of 70 years having expired at the end of 1994. Thus a clear SVG would make this crest a public domain equivalent.Kwib (talk) 22:43, 28 February 2010 (UTC)[reply]

Many thanks to DASHBot. The file is non-free currently, but an svg rendering would produce a PD version (only non-free because from a photo, however, the crest itself is PD). The link to the file is here: Image of 1924LionsCrest.Kwib (talk) 10:28, 3 March 2010 (UTC)[reply]

Graphist opinion(s):

Comment: This request has apparently been done. -- RA (talk) 19:39, 9 March 2010 (UTC)[reply]

I do not think that it has been done. The graphic remains the same as pre-request.Kwib (talk) 23:04, 12 March 2010 (UTC)[reply]
See here. --RA (talk) 22:03, 18 March 2010 (UTC)[reply]
Thank you for the link. However, that is the current crest that is only used under Fair Use. The crest I have made this request for is the 1924 crest. Although similar, each element of the crest is different from the current crest. If my request is fulfilled then it will be a PD image of the Lions crest.Kwib (talk) 09:43, 25 March 2010 (UTC)[reply]


American University of Central Asia

Article(s): American University of Central Asia

Request: vectorize... Chris (クリス • フィッチュ) (talk) 05:56, 21 March 2010 (UTC)[reply]

Graphist opinion(s):

  • Do you have a PDF or other official source for us to extract the image from? We should avoid custom traces or re-drawing of official logos (and that this is a non-free logo doesn't help, because it's application and use on Wikipedia is so limited in the first place)-Andrew c [talk] 14:57, 21 March 2010 (UTC)[reply]
  • I found their corporate design and style guide, but the entire thing (even the text) is raster, so that won't help your request much, but it does list the spot colors and such *but isn't in English*[1]. -Andrew c [talk] 15:02, 21 March 2010 (UTC)[reply]
This should be a relatively easy conversion doing a manual trace of the central icon and creating new of the rest. Matching the colours would be a snap, but the problem would be the font and the language. --Fred the Oyster (talk) 15:08, 21 March 2010 (UTC)[reply]
Yeah, type on curves is fairly difficult by itself, and to match it exactly seems nearly impossible. However, a seal isn't exactly the same as a corporate logo, and there may be different versions and thus some leniency in terms of accurate reproduction.-Andrew c [talk] 17:06, 21 March 2010 (UTC)[reply]
No I didn't mean that. Finding and/or identifying the font is the bit I find difficult. Once I have the right font the rest is easy, even if it's on a path. I'm afraid I don't have an eye for the subtle differences in similar fonts, so invariably I end up with a "close but no cigar". The kerning and tracking is easy too, if a little painstaking and time consuming. --Fred the Oyster (talk) 17:36, 21 March 2010 (UTC)[reply]
It's just been reduced, and the loss in detail is visible. Please try. Thank you! --Chris (クリス • フィッチュ) (talk) 19:12, 25 March 2010 (UTC)[reply]

Flag of India

Article(s): Flag of India

Request: clean up lettering, I know this is a difficult request... Chris (クリス • フィッチュ) (talk) 04:28, 28 March 2010 (UTC)[reply]

Graphist opinion(s): Actually there's a couple of other things wrong with this illustration relating to the Union Flag. I did edit this where I rebuilt the UF and the text, unfortunately when I re-converted it back to SVG the 'flower disappeared (that was after all the sodipodi errors were corrected. This image is a nightmare, at least it is if edited in Illustrator. What it would be like in Inkscape I have no idea. --Fred the Oyster (talk) 15:26, 29 March 2010 (UTC)[reply]

Self-steering gear images

Article(s): Self-steering_gear

Request: Both images need to be SVG'ed. Also, some coloring, ... might be added. KVDP (talk) 08:56, 30 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.

Wind generator system

Article(s): Microgeneration

Request: Image needs SVG'ing KVDP (talk) 08:56, 30 March 2010 (UTC)[reply]

Graphist opinion(s):

Heat pump

Article(s): Heat pump

Request: Image needs SVG'ing KVDP (talk) 12:13, 30 March 2010 (UTC)[reply]

Graphist opinion(s):

Big Thicket

Article(s): Big Thicket

Request: Convert to SVG? Thanks. Mcorazao (talk) 14:35, 30 March 2010 (UTC)[reply]

Graphist opinion(s):

Girl Guides and Girl Scouts

Article(s): multiple

Request: Most countries use standard colors-both blue/orange colors should match File:World Association of Girl Guides and Girl Scouts.svg-in RGB format, the blue is (0,82,214) and the orange is (254,143,3), remove all black bordering as unnecessary-this batch is much more simple, only two colors to standardize. Chris (クリス • フィッチュ) (talk) 19:58, 11 February 2010 (UTC)[reply]

Do you know the hex values of the definitive blue and gold? There are so many different shades to go from. Incidentally, the reason I left the black outlines on that template is so the illustrator can immediately see where the paths are. Everything is simple fills and strokes. I don't know about anyone else but a lot of the time I spent doing them was trying to match the fonts. Typography isn't my strong point so I don't immediately know the names of them. I know they are a reasonably basic sanserif font, but perks of my work I have access to around 100,000 fonts and variations, so as you may well gather searching for a particular font by sight in that lot is a nightmare. --Fred the Oyster (talk) 19:59, 20 February 2010 (UTC)[reply]
I wish I knew the hex values, I have been searching, meanwhile can it be picked up, like the eyedropper in Photoshop? Thank you for your hard work with the images and the fonts. I think from what I have seen (most of these are locally-produced pins, sometimes badges), any sans-serif works. On the template, changing the scroll border to orange, and the scroll itself to blue, would still leave the paths. Since you have access to fonts, I will have a weird one for you later. ;) --Chris (クリス • フィッチュ) (talk) 20:08, 20 February 2010 (UTC)[reply]
ps-Mononomic did the original color correction of the primary badge, maybe the hex triplet answer can be found. --Chris (クリス • フィッチュ) (talk) 20:14, 20 February 2010 (UTC)[reply]
Got an answer. They're actually not hex colors, but they are in RGB format. The blue is (0,82,214) and the orange is (254,143,3). Does this help? --Chris (クリス • フィッチュ) (talk) 20:57, 20 February 2010 (UTC)[reply]

Graphist opinion(s): File:Asia Pacific Region (World Association of Girl Guides and Girl Scouts).png probably needs a vectorization, I can try, but I'll probably need help with the text. Connormah (talk | contribs) 17:36, 20 February 2010 (UTC)[reply]

Could you also specify where you want the blue and orange colors on the one I recently traced? I can do it anytime. Connormah (talk | contribs) 18:05, 20 February 2010 (UTC)[reply]
That's a great start-the deeper blue bottom section and the matching orange symbol are what need color-matched. --Chris (クリス • フィッチュ) (talk) 18:25, 20 February 2010 (UTC)[reply]
Alright, so the blue should be orange, how about the lavender purple? Connormah (talk | contribs) 18:44, 20 February 2010 (UTC)[reply]
I took the liberty of adding the text. --Fred the Oyster (talk) 22:37, 20 February 2010 (UTC)[reply]
Leave that one as is, and any other extra colors on any of these images. The only colors to bother with are blue, orange-gold, and removal of black bordering. --Chris (クリス • フィッチュ) (talk) 19:00, 20 February 2010 (UTC)[reply]
Please, before this gets archived... --Chris (クリス • フィッチュ) (talk) 18:18, 14 March 2010 (UTC)[reply]
Please? --Chris (クリス • フィッチュ) (talk) 03:44, 2 April 2010 (UTC)[reply]

Completed list

Since this request is non-free image heavy, I am moving the completed ones here after. --Chris (クリス • フィッチュ) (talk) 03:52, 21 February 2010 (UTC)[reply]


Commisioner's Flags

Request: Please recreate in SVG format. The flags of the Territorial Commissioners follow the same common design as those for the Lieutenant-Governors of the provinces, except that instead of 10 maple leaves, they have 6, and also contain the territorial flower. They are all be the same ratio as the LG's flags, 1.2, although it appears they use a slightly lighter shade of blue(the file for yukon being purple is an error)

Here are the required Coats of Arms for the work: Nunavut, Yukon, & Northwest Territories

Fry1989 (talk) 02:27, 29 March 2010 (UTC)[reply]

Graphist opinion(s): Two done. The Nunavut arms aren't SVGed, but are available from that site if someone's willing to donate. Otherwise, I won't get around to it. NikNaks93 (talk) 14:44, 1 April 2010 (UTC)[reply]

Railway signal graphics

Per my question on the talk page, I need some railway signal icons creating for use with the railway diagram icons. The normal template used here does not seem to be useful for me to describe a non-created image, so I'll give it a go describing it manually.

Let's just start with a simple home signal positioned to the left of the track as illustrated in the Application of railway signals article. You will need to use File:BSicon STR.svg as a base, and add the signal to the left of the track. I'd like the new BSicon to be called File:BSicon hsigupl.svg. Secondly, I'll need the image to be rotated through 180°, this one to be called File:BSicon hsigdnl.svg. Signal to have a small black base, white post, red and white arm with square end. Obviously I'll need more icons created in future. If anyone is willing to work with me on a one-to-one basis please let me know on the talk page of my main account (my talk on this account redirects there). Thanks in advance, Mjroots2 (talk) 19:53, 3 April 2010 (UTC)[reply]

  Request taken by NikNaks93.

Create the image

The image

Article(s): 635th Supply Chain Management Wing

Request: Create a png image based on the wood painting. Thanks. Kevin Rutherford (talk) 00:47, 3 April 2010 (UTC)[reply]

Graphist opinion(s): I've gone one better and SVGed it. The font is off, but that's always the case unfortunately. If it's too wrong, I'll just remove the background from the original JPG and convert it to PNG. It helps to be as specific as possible when making requests ;) NikNaks93 (talk) 11:38, 3 April 2010 (UTC)[reply]

Ah, I should've asked for the svg. I don't think it will really matter about the font as it is the only one out there that isn't under copyright, so anything better than nothing will work. Kevin Rutherford (talk) 02:55, 4 April 2010 (UTC)[reply]
Well, if you find one more appropriate than the one I've used, let me know and I'll switch them round. NikNaks93 (talk) 09:49, 4 April 2010 (UTC)[reply]

distortion

Request: straighten distortion... Chris (クリス • フィッチュ) (talk) 04:57, 5 April 2010 (UTC)[reply]

Graphist opinion(s):

SVG-ize

Article(s): Table of nuclides, hypertriton

Request: Could someone make a free SVG version of this image? Headbomb {talk / contribs / physics / books} 10:04, 4 April 2010 (UTC)[reply]

Graphist opinion(s): I'm not sure how different it would need to be to make it free. Can you offer some suggestions? NikNaks93 (talk) 10:31, 4 April 2010 (UTC)[reply]

Well the link is just given for illustration purposes. Personally, I think going from N = −3 to +3, Z = −3 to +3, and S = −2 to +2 is good enough. Each layer should be:

S = −2
N↓/Z→ −3 −2 −1 0 1 2 3
3 5
Λ
Λ
6
ΛΛ
H
7
ΛΛ
He
8
ΛΛ
Li
2 4
Λ
Λ
5
ΛΛ
H
6
ΛΛ
He
7
ΛΛ
Li
1 3
Λ
Λ
4
ΛΛ
H
5
ΛΛ
He
6
ΛΛ
Li
0 2
Λ
Λ
3
ΛΛ
H
4
ΛΛ
He
5
ΛΛ
Li
−1
−2
−3
S = −1
N↓/Z→ −3 −2 −1 0 1 2 3
3 4
Λ
5
Λ
H
6
Λ
He
7
Λ
Li
2 3
Λ
4
Λ
H
5
Λ
He
6
Λ
Li
1 2
Λ
3
Λ
H
4
Λ
He
5
Λ
Li
0 1
Λ
2
Λ
H
3
Λ
He
4
Λ
Li
−1
−2
−3
S = 0
N↓/Z→ −3 −2 −1 0 1 2 3
3 3
n
4
H
5
He
6
Li
2 2
n
3
H
4
He
5
Li
1 1
n
2
H
3
He
4
Li
0 3
Li
2
He
1
H
1
H
2
He
3
Li
−1 4
Li
3
He
2
H
1
n
−2 5
Li
4
He
3
H
2
n
−3 6
Li
5
He
4
H
3
n

S = +1 and S= +2 are the same as the S = −1 and S = −2, although mirror-flipped diagonally, and with overlines on the element symbols and on the Lambdas (See S = 0 table). S = −2 should be the top layer, and S = +2 the bottom layer.Headbomb {talk / contribs / physics / books} 00:35, 5 April 2010 (UTC)[reply]

Niknaks seems to be away since the last week. Could anyone else take this? Headbomb {talk / contribs / physics / books} 21:15, 19 April 2010 (UTC)[reply]

al-Zarqawi

Article(s): al-Zarqawi

Request: remove border... Chris (クリス • フィッチュ) (talk) 04:54, 5 April 2010 (UTC)[reply]

Graphist opinion(s):

More backgrounds to be removed


 
SKY Sport logo Done
 
SKY Sport 1 logo
 
SKY Sport 2 logo
 
SKY Sport 3 logo
 
SKY Sport H/l's logo Done

Article(s): Sky Sport (New Zealand)

Request: Please remove the white backgrounds. WWE Socks 08:47, 7 April 2010 (UTC)[reply]

Uploaded the main and the Highlights logos. The others will be quite difficult to find, I imagine. —Quibik (talk) 16:18, 7 April 2010 (UTC)[reply]

Graphist opinion(s):

SKY Movies logos to SVGs


 
Logo of SKY Movies
 
Logo of SKY Movies 2
 
Logo of SKY Movies Greats

Article(s): Sky Movies (New Zealand)

Request: Please change these to SVGs. Thanks, WWE Socks 02:31, 8 April 2010 (UTC) Or PNGs without backgrounds. WWE Socks 02:35, 8 April 2010 (UTC)[reply]

Graphist opinion(s):

Resolved

Robot types

  Resolved

Article(s): Robot

Request: Needs to be cleaned up/SVG-yfied. The intent is to use the image in stead of the HONDA_ASIMO.jpg image at the top of the Robot article. This image gives the wrong impression of what a robot is (most are not even humanoid robots). Already tried to change it with the current version of my image a while ago, but it was not high enough in quality herefore. Perhaps the next version can make a difference. KVDP (talk) 10:09, 16 March 2010 (UTC)[reply]

Superb. I'll upload link to robot-article. Thanks.

User:KVDP

Graphist opinion(s):   Request taken by Fred the Oyster.

TBA_packaging_components

  Resolved

Article(s): Tetra Pak

Request: The lines of the "leaves" need to be aligned with the Tetra Brik (and colored black), also all leave borders need to be cleaned up (the leaves were originally from another image and modified). KVDP (talk) 15:01, 29 March 2010 (UTC)[reply]

Graphist opinion(s):

  Request taken by Andrew c.: I'll do it in SVG to boot. -Andrew c [talk] 15:09, 29 March 2010 (UTC)[reply]

  Done: -Andrew c [talk] 16:50, 29 March 2010 (UTC)[reply]

Thanks Andrew, however the main title has some typos; could you upload a new version with following changes: "package" --> packaging and "componets" --> components. Thanks.

KVDP (talk) 07:45, 30 March 2010 (UTC)[reply]

PS: I also added the reference to cradle-to-cradle design to your image (only this, not my full text). I hope this is OK.

KVDP (talk) 09:06, 30 March 2010 (UTC)[reply]

Sorry about that. Fixed. -Andrew c [talk] 15:04, 30 March 2010 (UTC)[reply]

Hitler Youth Emblem

  Resolved

Article(s): Hitler Youth

Request: Please redraw as SVG and remove the gray background Fallschirmjäger 13:42, 30 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.

Thanks a lot! Fallschirmjäger 16:09, 30 March 2010 (UTC)[reply]
  Resolved
 
Done

Article(s): Illinois Institute of Technology

Request: This logo needs some cleanup. The text in the logo and the book symbol in the centre has a white border around it. Please help me fix this. A PDF source can be obtained here. Thanks! JovianEye (talk) 17:30, 30 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Jagex Game Studio

  Resolved
 
JPG
 
SVG

Article(s): Jagex

Request: Please redraw as SVG, cheers Fallschirmjäger 18:44, 30 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Great job, thank you! Fallschirmjäger 23:12, 30 March 2010 (UTC)[reply]

Jagdgeschwader Insignia

  Resolved
 
  Done
 
  Done
 
  Done
 
  Done
 
Jagdgeschwader 53
  Done
 
  Done
 
  Done

Article(s): Jagdgeschwader 2, 3, 26, 27, 53, 54, 71

Request: Please redraw these Luftwaffe fighter wing insignias as SVG, thanks in advance. Fallschirmjäger 22:11, 29 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Shandris. (I will take 27, 53 & 54)

  Request taken by Jovianeye. (I will take 2)   Done
Thanks Jovianeye, thats perfect! Fallschirmjäger 09:57, 30 March 2010 (UTC)[reply]
Which two? I was going to do a couple but I can't see which ones you've done without going through all the images. Cheers. --Fred the Oyster (talk) 10:03, 30 March 2010 (UTC)[reply]
Jovianeye did the first one which is for Jagdgeschwader 2. THe ones that haven't been taken yet are the middle two on the top row and last one on the right of the bottom row. Fallschirmjäger 13:20, 30 March 2010 (UTC)[reply]
Cheers Fred and Shandris, those are excellent! Fallschirmjäger 15:00, 30 March 2010 (UTC)[reply]
Thanks Fred for finishing those off, you did a perfect job! Fallschirmjäger 13:15, 31 March 2010 (UTC)[reply]

Nazi organisations

  Resolved

Article(s): NSS, NSDStB and RKB

Request: Please redraw as SVG and remove grey backgrounds. Perhaps add a thin stroke around each so that it stands out from a white background. Cheers Fallschirmjäger 14:59, 30 March 2010 (UTC)[reply]

Graphist opinion(s): I've done the easier one. I'll try to do the third as well.

Thanks, looks great. Fallschirmjäger 16:21, 30 March 2010 (UTC)[reply]
Done two now. Working on the other. NikNaks93 (talk) 09:59, 31 March 2010 (UTC)[reply]
And finished. Hope they're alright! NikNaks93 (talk) 10:32, 31 March 2010 (UTC)[reply]
Thanks so much, those are perfect, cheers! Fallschirmjäger 13:19, 31 March 2010 (UTC)[reply]

  Done


Panzer Division COAs

  Resolved

Article(s): Panzer Lehr Division, Fallschirm-Panzer-Div 1 HG and 5th SS Panzer Division Wiking

Request: Please redraw as SVG. On the second one please remove the background. Fallschirmjäger 13:55, 31 March 2010 (UTC)[reply]

  Done

Graphist opinion(s): How's that? NikNaks93 (talk) 15:45, 31 March 2010 (UTC)[reply]

They are awesome, thanks so much, quick work too! Fallschirmjäger 15:47, 31 March 2010 (UTC)[reply]

Flag of the Republic of India

  Resolved

Article(s): Flag of India and plenty of others

Request: The source code of the SVG file is invalid! See here for more details. Can this be fixed? JovianEye (talk) 16:00, 31 March 2010 (UTC)[reply]

Graphist opinion(s):

No, it can't be fixed, because the administrators at Commons are batshit crazy. ¦ Reisio (talk) 20:22, 31 March 2010 (UTC)[reply]
Protecting high risk images isn't a crazy idea, especially when we have requests for unprotection and "edit protected" templates. I'm an admin at Commons and would gladly fix this myself, but not sure what needs to be done to fix the errors to make it validate. -Andrew c [talk] 01:21, 1 April 2010 (UTC)[reply]
Ha. You just said it's not crazy to allow only the inept to make edits. ¦ Reisio (talk) 09:35, 1 April 2010 (UTC)[reply]
I know how to fix it, but is it worth jumping through the hoops to do so? --Fred the Oyster (talk) 07:37, 1 April 2010 (UTC)[reply]
So what the hell, I went ahead and corrected it, validated it and added the {{valid SVG}} template. I suspect the error may have crept in during ZScout's compression. And Reisio, the protected link you gave is the link on en:wikipedia, not commons. --Fred the Oyster (talk) 08:44, 1 April 2010 (UTC)[reply]
Oh well, give it a couple days I'm sure that flag will be protected as well. ¦ Reisio (talk) 09:35, 1 April 2010 (UTC)[reply]
Thanks a lot Fred! --JovianEye (talk) 15:21, 1 April 2010 (UTC)[reply]

  Request taken by Fred the Oyster.  Done

What was the problem with the file in the first place? How do you fix it? And where can I see that it's invalid? The flag looks perfectly fine to me. --Shandristhe azylean 15:29, 1 April 2010 (UTC)[reply]
In the original the chakra in the centre was made up of about 4 nested groups of shapes. It was this that was choking the validator. I could have manually messed around with the code to unnest them, but that didn't sound like fun so I simply drew a new flag and include a chakra I'd altered a while back which I knew validated okay. It is larger than the original by 4k but one can't have everything :) --Fred the Oyster (talk) 21:18, 1 April 2010 (UTC)[reply]
Just when one thinks that things have been sorted out, Zscout370 has gone and reverted your update to the flag! I dont know what to do nor say in such a situation. --JovianEye (talk) 21:40, 1 April 2010 (UTC)[reply]
Seems strange his concept that losing 3k or so of code takes precedence over incorrect code. Most probably because it's his code that's wrong, ho-hum I reverted it back. --Fred the Oyster (talk) 21:51, 1 April 2010 (UTC)[reply]
The central emblem is not evenly rounded as the previous image was, the stripes are all different heights, they are supposed to be even. SVG validation is not a requirement, so you are accomplishing nothing. Stop now. User:Zscout370 (Return Fire) 04:09, 2 April 2010 (UTC)[reply]
Someone who knows something about code must know what can be done about this, right? My experiencing validating HTML leads me to believe this really shouldn't be that hard, and can be accomplished in a text editor, but I just don't know enough about the coding. This is the internet, I know we can find a Wikipedian with the knowledge to help us out. -Andrew c [talk] 04:17, 2 April 2010 (UTC)[reply]
I did a complete check of the image, basically, it is full of flaws (even if the code is not bloated). The flag itself was not in a 2x3 ratio (as required by law). The strips were not even and were not placed correctly. For example, when I did extend the flag to 300 pixels high, the stripes for white and saffron were not 100 pixels high and they were placed at 98 pixels for y, which is not correct. The central emblem is not centered on the flag and it also was not rounded (the height was bigger than the width for both the main wheel and small blue circle). It was pretty much not even a fixing of the image at all. Plus, as I said before, SVG validation is not a requirement at the Commons. Never has, never will be. As long as the images display fine here, that is all we care about. User:Zscout370 (Return Fire) 04:35, 2 April 2010 (UTC)[reply]
If the ratios are incorrect then blame your version too, as that was used as the template, to the pixel I{I'll be happy to send you he original .ai file. Bloated code or not it still had the advantage of the W3 saying it was correct, which, I believe, trumps the opinion of any Wikipedia editor. --Fred the Oyster (talk) 09:12, 2 April 2010 (UTC)[reply]
Being W3 compliant is still not a goal for the Commons. User:Zscout370 (Return Fire) 17:02, 2 April 2010 (UTC)[reply]
Reference? And if I may say so, that must be the most ridiculous thing I've heard today. --Fred the Oyster (talk) 17:14, 2 April 2010 (UTC)[reply]
Commons:Graphics_village_pump/November_2007#Proposal:_an_SVG_How-to_page. It was suggsted, but not a requirement that images have to pass that validator (or tag failed images with it). User:Zscout370 (Return Fire) 17:22, 2 April 2010 (UTC)[reply]
File:Nuvola Bangladeshian flag 2.svg has 30 errors.... File:Risk map hexagonally normalized.svg has 610 errors... :) -Andrew c [talk] 17:55, 2 April 2010 (UTC)[reply]
I just checked that Hexagon thingy and it came up as green in http://validator.w3.org/ what are you talking about errors? --Shandristhe azylean 18:12, 2 April 2010 (UTC)[reply]
Now this is my personal opinion; I noticed that both of the files were tagged with being made with Illustrator. Fred, have you thought of trying to use Inkscape and see if some of the possible errors could be cut down? User:Zscout370 (Return Fire) 18:03, 2 April 2010 (UTC)[reply]
Nope I won't use Inkscape if you paid me, I think it's a horrible program. What I think is causing the problem, isn't actually Illustrator. Every file I convert to SVG I run through Scour first to try to reduce the Adobe bloat. I've had a few things go awry after using that optimiser. I think I'll just upload the original files in future. I think I shall do some more experiments. But I should have it known that I don't have any interest in the code itself. I'm a designer, not a numbers or code geek. Ultimately it's how it looks is what I care about. As such I care not a jot how big it is (within limits) or how it's coded, e.g. whether it's 10 points or 9.78 points. I've only recently started using the validator so those images you 'quoted' had never been run through it and therefore no attempt had been made to correct any errors. --Fred the Oyster (talk) 19:07, 2 April 2010 (UTC)[reply]
Incidentally, the 30 errors generated by File:Nuvola Bangladeshian flag 2.svg were all Inkscape or Sodipodi errors due to the initial file I'd used as a template. Strange how you didn't mention that. --Fred the Oyster (talk) 19:13, 2 April 2010 (UTC)[reply]
Both files now validate correctly once I'd removed all the Inkscape references in the flag. The hexagonal one was my fault as it was one of the first SVG images I had done so didn't really know what the hell I was doing. It's also gone from 65k down to 2k. This being the case I may go back and revisit some of the illustrations I'd done in my early SVG career and check and correct them too. --Fred the Oyster (talk) 19:26, 2 April 2010 (UTC)[reply]
Just wanted to laugh at your Inkscape causing the errors comment. Zing! I'm not a fan of Inkscape for illustration. But Illustrator doesn't produce the best SVGs (as you well know, seeing as you have to post-process them to remove adobe bloat). So there isn't really a perfect solution. I've found that if I create a file in illustrator, then open it in inkscape to view it (and say I decide to resize the image, or adjust the page size), when I resave the resized image in Inkscape, it always adds at least 5kb. Odd. Anyway, I use both programs, and they both have their ups and downs, but my personal preference is Illustrator (and if you asked me 10 years ago, I'd tell you Freehand was my personal preference). ha. Sorry to continue the off topic discussion. -Andrew c [talk] 22:37, 2 April 2010 (UTC)[reply]

You are seriously mistaken about Illustrator (or perhaps using a very old version?). Illustrator produces, in my opinion, near-perfect source code (especially when compared to Inkscape) – it's minimal and well structured. You have to disable a couple of options, that would otherwise add AI specific metadata, when saving the SVG (in AI CS4): font type not set to "Adobe CEF"; "preserve Illustrator editing capabilities", "optimize for Adobe SVG Viewer", "include Adobe Graphics Server data", "include slicing data", and "include XMP" all unchecked. That should solve the problem. —Quibik (talk) 00:19, 3 April 2010 (UTC) [reply]

  Resolved

Here was your problem; a lot of the SVG flag images uses 1.1 for the SVG version, the previous guy used 1.0. That was the main reason for the failure of validation. With also 1.1, you are not allowed to start a group with a number, but you can a letter. So I changed 2,4,6,8 to a,b,c,d and I changed the doc type to say 1.1. The file now validates and still keeps the very reduced code). User:Zscout370 (Return Fire) 07:36, 2 April 2010 (UTC)[reply]

I also had to remove the specific UTF and SVG version declaration, so now, truly, the file is validated. User:Zscout370 (Return Fire) 07:45, 2 April 2010 (UTC)[reply]
Thanks a lot Zscout, and thanks for explaining what you did. I figured changing the ID might have done something, but I didn't even think about the doctype. Knowing is half the battle. Hopefully more folk will be able to help out in the future. -Andrew c [talk] 15:41, 2 April 2010 (UTC)[reply]

Chilly Willy

  Resolved

Article(s): Chilly Willy

Request: remove border... Chris (クリス • フィッチュ) (talk) 15:55, 4 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Thank you both! --Chris (クリス • フィッチュ) (talk) 04:55, 5 April 2010 (UTC)[reply]

RegularEarthshipDesign

  Resolved

Article(s): Earthship

Request: Image needs SVG'ing KVDP (talk) 08:56, 30 March 2010 (UTC)[reply]

Thanks Fred,

I uploaded the new version to the article. KVDP (talk) 13:44, 3 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Jagdgeschwader 74 Insignia

  Resolved

Article(s): Jagdgeschwader 74

Request: Please redraw this fighter wing Jagdgeschwader 74 CoA as an SVG, Cheers. Fallschirmjäger 16:45, 31 March 2010 (UTC)[reply]

Graphist opinion(s):

  Done --Shandristhe azylean 10:09, 2 April 2010 (UTC)[reply]

Thanks, thats perfect, great job! Sorry for the late reply I've been away on vacation over easter! Fallschirmjäger 11:12, 6 April 2010 (UTC)[reply]

Fascist Organisations

  Resolved
 
PNG
 
SVG

Article(s): RFO, AFA, Werwolf, General Dutch Fascist League and NSNAP

Request: Please recreate these as SVGs, thanks Fallschirmjäger 19:38, 1 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye. (I take files 1,2,3,5)   Done

Wow super quick work, thanks so much! Fallschirmjäger 20:20, 1 April 2010 (UTC)[reply]

  Request taken by NikNaks93. I'll do the other one, then :) NikNaks93 (talk) 09:16, 2 April 2010 (UTC)   Done[reply]
Comment: If the first file is a logo then the current version with the transparent background is fine, but if the file is a flag then I think that the background must be made white! --JovianEye (talk) 12:21, 2 April 2010 (UTC)[reply]

Thank you all guys for the combined effort, great job. Cheers Fallschirmjäger 11:16, 6 April 2010 (UTC)[reply]

Remove white background

  Resolved
 
UniMAP logo

Article(s): UniMAP

Request: Remove the white background of this SVG image. Thanks Arteyu ? Blame it on me ! 12:00, 2 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Thank you (: Arteyu ? Blame it on me ! 12:37, 2 April 2010 (UTC)[reply]

Incorrect font

  Resolved
 
Tabung Haji logo

Article(s): Tabung Haji

Request: The font used on "Tabung Haji" is incorrect. You may refer to this and this for the correct font. Thanks. Arteyu ? Blame it on me ! 11:06, 3 April 2010 (UTC)[reply]

Graphist opinion(s): How's that? NikNaks93 (talk) 11:46, 3 April 2010 (UTC)[reply]

Great! Thank you. Arteyu ? Blame it on me ! 12:49, 3 April 2010 (UTC)[reply]

Multiregional evolution

  Resolved

Article(s): Multiregional evolution

Request: svgify... Chris (クリス • フィッチュ) (talk) 06:20, 5 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Thank you! --Chris (クリス • フィッチュ) (talk) 17:24, 6 April 2010 (UTC)[reply]

Pioneers

  Resolved

Article(s): Pioneers

Request: remove unnecessary background shading... Chris (クリス • フィッチュ) (talk) 19:16, 5 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Thank you! I think that is much cooler without embellishment. Now I wanna sing Scorpions... --Chris (クリス • フィッチュ) (talk) 17:02, 6 April 2010 (UTC)[reply]
  Resolved
 
PNG
 
SVG

Article(s): Fimleikafélag Hafnarfjarðar

Request: Please redraw as SVG. Note that the striped vertical lines are meant to be solid, not dashed as they appear in the png, cheers. Fallschirmjäger 20:54, 7 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done Extracted from official PDF source. --JovianEye (talk) 21:11, 7 April 2010 (UTC)[reply]

Thanks so much, super quick work, cheers! Fallschirmjäger 21:19, 7 April 2010 (UTC)[reply]

Royal Police flag

  Resolved

Article(s): Royal Malaysian Police

Request: I can see whites line of the above image from this page in the infobox. Can someone remove it? There might be some other errors as well. Arteyu ? Blame it on me ! 13:04, 4 April 2010 (UTC)[reply]

Graphist opinion(s): The background was made up of an L-shaped piece and a rectangle for some reason. I've made it one rectangle and it seems fine now. NikNaks93 (talk) 13:42, 4 April 2010 (UTC)   Done[reply]

Thank you so much (: Arteyu ? Blame it on me ! 15:13, 4 April 2010 (UTC)[reply]

Remove background

  Resolved

Article(s): Sky Network Television

Request: Could someone please take the background out of this logo and perhaps turn it into an SVG if possible. WWE Socks 05:24, 6 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Remove white background

  Resolved

Article(s): Sky Network Television

Request: Could someone please take out the un-neccesary white background. But make sure to leave everything including the ribbon below. WWE Socks 08:21, 7 April 2010 (UTC)[reply]

Graphist opinion(s): Comment:IMO, the ribbon is not a part of the actual logo. The logo that I had done in the previous section was obtained from an official PDF. --JovianEye (talk) 13:47, 7 April 2010 (UTC)   Done. I created a SVG version, but I agree with JovianEye, that the version without the ribbon would be more suitable. Quibik (talk) 13:55, 7 April 2010 (UTC)[reply]

Remove background

  Resolved
 
Logo for The Box
 
vectorised
 
from an official source

Article(s): The Box (New Zealand TV channel)

Request: Please remove the white background out of the logo. WWE Socks 08:42, 7 April 2010 (UTC)[reply]

Graphist opinion(s):   Done. Someone could still vectorize it, though. Quibik (talk) 14:32, 7 April 2010 (UTC)[reply]

Thanks for the effort Fred, but I stumbled upon an official version of the logo when looking for the Sky Sport logos, so I uploaded it. —Quibik (talk) 16:01, 7 April 2010 (UTC)[reply]
  Resolved
 
Fylkir football club logo
 
SVG version

Article(s): Fylkir

Request: Please redraw as SVG... Fallschirmjäger 21:01, 7 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.   Done

Cheers Fred, awesome work as always! Fallschirmjäger 13:00, 8 April 2010 (UTC)[reply]
  Resolved
 
Breiðablik UBK football club logo
 
SVG

Article(s): Breiðablik UBK

Request: Please also redraw as SVG, cheers. Fallschirmjäger 21:04, 7 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Awesome thanks! Fallschirmjäger 08:39, 8 April 2010 (UTC)[reply]

HJK Helsinki club crest

  Resolved
 
HJK Helsinki club logo
 
SVG

Article(s): HJK Helsinki

Request: Please redraw as an SVG, thanks. Fallschirmjäger 13:34, 8 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Thanks looks good, but I've just noticed the logo has been updated to include two stars, as shown here, would it be possible to add these too? Fallschirmjäger 16:48, 8 April 2010 (UTC)[reply]
You're right the stars are an addition to the old logo. I have found a official PDF containing the new logo, but when I opened it with Inkscape to my surprise the two stars looked like "H H". Maybe a graphist with more skill could resolve this issue! --JovianEye (talk) 17:15, 8 April 2010 (UTC)[reply]
Well thanks for the main logo SVG logo in any case, you did a great job on that. I had a look at the PDF and opened it in Illustrator, I too got the H H, I found this is because it uses a font called 'ZapfDingbatsITC'. Maybe it would be easier for someone to just redraw some simple stars instead? Fallschirmjäger 18:15, 8 April 2010 (UTC)[reply]
Updated with the stars directly from the PDF. --Fred the Oyster (talk) 18:34, 8 April 2010 (UTC)[reply]
Thank you so much for fixing that! Fallschirmjäger 19:39, 8 April 2010 (UTC)[reply]

Flag of 19th century Icelandic Army

  Resolved

Article(s): Military of Iceland, List of flags of Iceland and Military history of Iceland

Request: Please redraw this flag of the Icelandic Army as an SVG, thanks! Fallschirmjäger 19:48, 8 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.   Done

Cheers, quick too! Fallschirmjäger 20:27, 8 April 2010 (UTC)[reply]

Deep_water_source_cooling

  Resolved

Article(s): Deep_water_source_cooling

Request: Image needs SVG'ing KVDP (talk) 12:15, 30 March 2010 (UTC)[reply]

Thanks Shandris, can the ground be colored brown dough ? Upload new version of image over old one. --KVDP (talk) 13:47, 3 April 2010 (UTC)[reply]
What's brown dough? Can you go to www.colorpicker.com and tell the HEX code of the color you want? What do you think of the image otherwise? Took 3 hours to create xD. --Shandristhe azylean 18:08, 3 April 2010 (UTC)[reply]
A light brown color such as nr E3A754 would be fine. The rest of the image is well done.

KVDP (talk) 11:13, 9 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Shandris.   Done

Hokkaidō flag

  Resolved
Hokkaidō symbol   Done

Article(s): Hokkaidō

Request: Please redraw as SVG, thanks. Fallschirmjäger 08:40, 9 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Thanks a lot! Fallschirmjäger 15:18, 9 April 2010 (UTC)[reply]

Flag of De Bilt

  Resolved

Article(s): De Bilt

Request: Please redraw as an SVG, cheers. Fallschirmjäger 11:07, 9 April 2010 (UTC)[reply]

  Request taken by NikNaks93.   Done

Cheers, excellent job! Fallschirmjäger 12:59, 9 April 2010 (UTC)[reply]

Graphist opinion(s):

Natural ventilation

  Resolved

Article(s): Natural ventilation

Request: Image needs SVG'ing KVDP (talk) 11:20, 30 March 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Exit signs

  Resolved

Articles: Exit sign

Request: Produce SVGs of the US exit signs after the fashion of the ISO version. 76.117.247.55 (talk) 03:51, 3 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Fred the Oyster.  Done

Yes! Only two problems: "Green" looks like cyan to me (Bad monitor?) and the proportions aren't quite the same. I think the actual signs have a little thicker stroke widths. Can you make these changes? 76.117.247.55 (talk) 15:06, 3 April 2010 (UTC)[reply]
I sampled one of the colours from the sign to get the 'green' I used which is a sort of turquoise, I can darken it a bit if you wish. I was wondering whether to use a bold font too. I'll give it a try and see what it looks like. Incidentally, for future reference for those who are interested, the font is the ubiquitous Helvetica Condensed. --Fred the Oyster (talk) 15:38, 3 April 2010 (UTC)[reply]
It's virtually impossible to match a lit sign using a vector image. There are too many different shades and graduations to make it photo real. All you can do is get a close approximation, which is why I sampled an existing colour. There must be hundred+ shades of green in that image, so which one is the correct one? --Fred the Oyster (talk) 15:51, 3 April 2010 (UTC)[reply]
Do bold the current font, that will probably correct the proportions problem. As to the color, untill/unless it can be found out that exit sign green is a specific (code-specified) shade of green, I would just go with the same shade of green the running man icon uses (3d original image). 76.117.247.55 (talk) —Preceding undated comment added 21:41, 3 April 2010 (UTC).[reply]
Font and boldness changed (Helvetica Neue LT 67 Medium Condensed), green changed to the same green as the man. I also darkened the red slightly to match the darker shade of the green. --Fred the Oyster (talk) 14:45, 4 April 2010 (UTC)[reply]

Perfect! 76.117.247.55 (talk) 01:41, 11 April 2010 (UTC)[reply]

Farouk I

  Resolved

Article(s): Farouk I

Request: svgify... Chris (クリス • フィッチュ) (talk) 04:59, 5 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Connormah.   Done Connormah (talk | contribs) 22:58, 10 April 2010 (UTC)[reply]

Great, thank you! --Chris (クリス • フィッチュ) (talk) 08:53, 11 April 2010 (UTC)[reply]

Kimono

  Resolved

Article(s): Kimono

Request: transparent background... Chris (クリス • フィッチュ) (talk) 12:14, 15 April 2010 (UTC)[reply]

Graphist opinion(s):   Done. Quibik (talk) 15:31, 15 April 2010 (UTC)[reply]

Thank you! --Chris (クリス • フィッチュ) (talk) 19:10, 15 April 2010 (UTC)[reply]

Conversion tables

  Resolved

Article(s): Storm Prediction Center

Request: Please make them into .svg format. Thanks in advance, Ks0stm (TCG) 14:53, 9 April 2010 (UTC)[reply]

Graphist opinion(s): Why not format this using HTML and CSS in the article instead? That way it will have better accessibility. I'd discourage vectorizing it. —Quibik (talk) 18:38, 10 April 2010 (UTC)[reply]

I don't know how to do that...if you could explain how, I'd be happy to do so... Ks0stm (TCG) 20:09, 10 April 2010 (UTC)[reply]
I might have been too hasty, sorry. The hatching in the tables seems to be important and that can't be recreated with CSS as far as I know. So this still needs to be vectorized. —Quibik (talk) 09:23, 11 April 2010 (UTC)[reply]
Couldn't the hatching be an image which is then used as the background for the table cell?--Fred the Oyster (talk) 09:41, 11 April 2010 (UTC)[reply]
That's certainly doable with CSS, but the possibilities are limited on Wikipedia: you'd have to directly link to an image, which can't be done. But we could instead change the layout and rather than place the patterns/colors on the background we could just put them in another column next to the text. Then something similar to Commons:Template:Legend#Examples can be used. What do you think? —Quibik (talk) 12:40, 11 April 2010 (UTC)[reply]
As for me, I'm sure anything will work if it's of a good quality...the reason I was looking to .svg is it can be scaled without losing sharpness, and most of the Storm Prediction Center's graphics tend to lose readability on smaller scales. Ks0stm (TCG) 18:28, 13 April 2010 (UTC)[reply]

  Request taken by quibik.. I'll turn them into wikitables and add them directly to the article(s). —Quibik (talk) 19:30, 14 April 2010 (UTC)[reply]

Sharky

  Resolved

Article(s): N/A (for use by Wikipedia:WikiProject Sharks)

Request: Just wondering if someone could convert this PNG into an SVG. Adding some color would be a nice bonus, but not required. Requesting that all work be released under CC0 to match original license and allow easy reuse. Kaldari (talk) 19:45, 14 April 2010 (UTC)[reply]

Graphist opinion(s): I uploaded the image in the gallery, but somehow it didn't get saved correctly, I'm not sure. Could somebody check it out?   Request taken by name.: NativeForeigner ;

It looks like the SVG file has a dependency on the PNG file. Did you leave the raster version in a tracing layer? Kaldari (talk) 03:46, 16 April 2010 (UTC)[reply]
Fixed it. Quibik (talk) 14:22, 16 April 2010 (UTC)[reply]

Looks like Fred the Oyster has also created a color version (I suppose he can't post it here due to his block). —Quibik (talk) 14:30, 16 April 2010 (UTC)[reply]

Looks great all around! Kaldari (talk) 15:51, 16 April 2010 (UTC)[reply]
  Resolved
 
Freeview New Zealand logo

Article(s): Freeview (New Zealand)

Request: Remove background and make into svg please. WWE Socks 04:14, 10 April 2010 (UTC)[reply]

I created File:Freeview NZ logo.svg, which is a replacement to the image currently in the infobox. I don't think this "old" logo is really different enough to be worth keeping in the article, so I removed it and nominated it for deletion. Quibik (talk) 00:02, 12 April 2010 (UTC)[reply]

Graphist opinion(s):

Horrible text in SVG

  Resolved

Article(s): Decay chain

Request: The text should scale. Headbomb {talk / contribs / physics / books} 21:34, 12 April 2010 (UTC)[reply]

Well it works now, thanks to Quibik. Headbomb {talk / contribs / physics / books} 03:05, 15 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Shandris.

Democratic Voice of Burma

  Resolved

Article(s): Democratic Voice of Burma

Request: reverse black and white for visibility, svgify if possible... Chris (クリス • フィッチュ) (talk) 09:26, 13 April 2010 (UTC)[reply]

Graphist opinion(s): I reversed the black and white. Quibik (talk) 23:00, 19 April 2010 (UTC)[reply]

Great, thank you! --Chris (クリス • フィッチュ) (talk) 04:06, 20 April 2010 (UTC)[reply]

Mayo

  Resolved

Article(s): Mayo

Request: Trim out completely unnecessary blank space... Chris (クリス • フィッチュ) (talk) 02:07, 22 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done

Thank you! --Chris (クリス • フィッチュ) (talk) 09:20, 22 April 2010 (UTC)[reply]

Rostral/caudal diagram

  Resolved
 – 20:27, 20 April 2010 (UTC)

Article(s): Anatomical terms of location

Request: Can someone take LadyofHats' skull and remake this diagram so that it doesn't look like it was created in Microsoft Paint? Any file format is fine, however, please retain the public domain licensing if possible. Thanks! Kaldari (talk) 15:45, 15 April 2010 (UTC)[reply]

Looks great! Kaldari (talk) 15:10, 23 April 2010 (UTC)[reply]

Graphist opinion(s):   Done --Shandristhe azylean 17:26, 15 April 2010 (UTC)[reply]

2010 eikaiwa meltdown

  Resolved
 
clear background, rename File:GEOS (eikaiwa).jpg, svgify if you can
 
smooth pixellation to round, 1 px border all the way around, svgify if you can
 
reverse blue and white, clear background, svgify if you can

Article(s): GEOS (eikaiwa)

Request: I know it's a pain, this is very topical hot news in Japan right now. I am sorry the quality of the images is not better, I have no skill, which is why I always ask. Thanks and sorry. Chris (クリス • フィッチュ) (talk) 09:19, 22 April 2010 (UTC)[reply]

Graphist opinion(s):  Done--Svgalbertian (talk) 19:10, 23 April 2010 (UTC)[reply]

Those are perfect, and thank you for all the background research you put in! --Chris (クリス • フィッチュ) (talk) 13:22, 24 April 2010 (UTC)[reply]

moved from map lab-quick removal of white space on a triangular flag

  Resolved

Article(s): Durrani Empire Sikh Unrepresented Nations and Peoples Organization First Anglo-Sikh War Second Anglo-Sikh War List of wars 1800–1899 Nishan Sahib Battle of Chillianwala Sikh Empire Battle of Sobraon Battle of Aliwal Battle of Mudki Battle of Ferozeshah Battle of Ramnagar Battle of Gujrat Allegations of British assistance to Ruhollah Khomeini List of wars involving Great Britain

Request: Can you remove the white space?, this flag is supposed to be triangular so it looks a bit weird when it has white space. Also can you upload the image to the commons (above "File usage on Commons") Thanks Profitoftruth85 (talk) 00:52, 26 April 2010 (UTC)[reply]

Graphist opinion(s):   Request taken by Jovianeye.   Done see if it is ok!

This was great! I didnt expect it to be done so quickly. Thanks--Profitoftruth85 (talk) 04:24, 26 April 2010 (UTC)[reply]