Wikipedia

User:Junkitchang/sandbox


House at Big Hill
File:Kevin Borland's Fitzgerald House Exterior 1979.jpg
Kevin Borland's Fitzgerald House Exterior (1979)
General information
LocationGreat Ocean Road, Big Hill, Victoria, Australia
Completed2011
ClientPrivate
Design and construction
Architect(s)Kerstin Thompson

The House at Big Hill, also known as the Boyd House II, is a family home in Walsh Street, South Yarra, Victoria, Melbourne, Australia, designed by Robin Boyd in 1958, which the Boyds moved into a year later. Robin Boyd was known not only as an architect but also an architectural writer, educator and commentator. Born in 1919, he came from a creative family background of sculptors, painters and architects. He and his wife Patricia occupied the South Yarra home with their two daughters.

Site and Location

edit

House at Big Hill is located at Lorne, Victoria which is near Great ocean road. The building is a direct design response towards the surrounding site and situated on a sloping landscape.[1] A right-angled triangle plan aligns with the existing condition of the sloping ground. The triangular plan starts to take advantage of the panoramic view from the hill overlooking the Bass Strait and towards the townships of Lorne and Aireys Inlet through eucalypts.[2]

 
On the left half of the facade, no windows are eye height.

Form and Program

edit

House at Big hill is based on a singular form. The design includes "an interest in the use of the platonic form amongst the Victorian moderns." [3] It depicts a single storey unit housing, but in actual fact the second storey is located below. The program is unrestricted by the triangular geometry. Inside the house, the rooms slide into each other and it creates an unrestricted space within the house.[4] There is a kitchen, a bathroom, one bedroom, and flexible space located on the entrance floor. A living area, two bedrooms and a bathroom located between the two bedrooms are on the floor below. All the bedrooms are facing southwest and look at the panoramic view. The triangular planning both integrates and separates the exterior and interior space.

The longer side of the triangular plan, which is facing the entrance acts as a retaining wall. The right-angled corner defines a significant separation between the inside and out, while at the acute-angled corner integrates the interior and exterior. [5]

Materials

edit

The materials being used for House at Big Hill is being reduced to a palette of concrete, glass and timber based on the intention for a coastal retreat to be basic and creating an embedded modesty. [6]

The use of natural grey block work walls in the building is critical to achieve a depth for shadow and an experience of mass, which was desired by the client to have a solid building. It creates the habitable niche and recalls the Griffins’ Castlecrag buildings.[7] Furthermore, the concrete floors and block work walls works as a heat bank in the house, which absorb the heat from the room with their great thermal masses during summer and steam through the windows on winter days. [8]

Timber highlights are used to improve what is naturally a Brutalist palette.[9] The interior of the house is carefully designed based on light and shadow and the use of timber accents offsets the concrete floor and block work walls. [10]

Formply, a medium density overlaid forming structural plywood is suitable for concrete formwork.[11] In the House at Big Hill, the dark coloured Formply ceiling is used to intensify the colours of the adjacent bush and distant sea scapes.[12] It is known to be a durable and strong material. Furthermore, it has a low water transmission rate from a constant water/ cement ratio which results in a harder, denser concrete surface. It is easy to install and maintain and provides a smooth matte-finish that resists grain and patch transfer.[13]

The folded ceiling surface which follows the line of the roof acts as a shelter for the house. Instead of creating a parapet, the roof shifts to two sides and it creates an overhang or eave to the north.[14] With the combination of the dark coloured ceiling and the roof of the house, it visually camouflages itself with the bush landscape. [15] The pocket windows installed on the wall are carved out to provide port holes to isolate and frame the views.[16]


Awards

edit

The house at big Hill was completed in 2011 and within a short period has won many awards. It includes the 2012 Victorian Australian Institute of Architect "AIA" awards in the category of New Residential and also the winner of Best New House over 200m2 in 2012 House Awards. It also received a commendation in 2012 National AIA Awards in Residential Architecture.[17]


References

edit

Notes

edit
  1. ^ [1]
  2. ^ [2]
  3. ^ [3]
  4. ^ [4]
  5. ^ [5]
  6. ^ [6]
  7. ^ [7]
  8. ^ [8]
  9. ^ [9]
  10. ^ [10]
  11. ^ [11]
  12. ^ [12]
  13. ^ [13]
  14. ^ [14]
  15. ^ [15]
  16. ^ [16]
  17. ^ [17]

Sources

edit
 
Wikimedia Commons has media related to House at Big Hill.

http://architectureau.com/articles/big-hill/ http://www.archdaily.com/292048/house-at-big-hill-kerstin-thompson-architects/ http://chemphilaust.com.au/australian-fireplace-designs-kerstinthompsonarchitects-bighill.php http://designalmic.com/house-at-big-hill-kerstin-thompson-architects/ http://www.bookmarc.com.au/blog/a-return-to-simplicity-with-the-house-at-big-hill-2/ http://www.delood.com/interiors/house-big-hill-kerstin-thompson-architects http://www.desiretoinspire.net/blog/2013/1/24/kerstin-thompson-architects.html


37°49′53″S 144°59′11″E / 37.8313°S 144.9864°E / -37.8313; 144.9864

Category:Australian architecture Category:Houses in Melbourne

Retrieved from "https://en.wikipedia.org/w/index.php?title=User:Junkitchang/sandbox&oldid=559988439"