Ajluni, Thomas; Everett, David; Linn, Timothy; Mink, Ronald; Willcockson, William; Wood, Joshua (2015-06-08). "OSIRIS-REx, returning the asteroid sample". 2015 IEEE Aerospace Conference. IEEE: 1–15. doi:10.1109/AERO.2015.7118988. ISBN 978-1-4799-5379-0.
![]() | Draft article not currently submitted for review.
This is a draft Articles for creation (AfC) submission. It is not currently pending review. While there are no deadlines, abandoned drafts may be deleted after six months. To edit the draft click on the "Edit" tab at the top of the window. To be accepted, a draft should:
It is strongly discouraged to write about yourself, your business or employer. If you do so, you must declare it. Where to get help
How to improve a draft
You can also browse Wikipedia:Featured articles and Wikipedia:Good articles to find examples of Wikipedia's best writing on topics similar to your proposed article. Improving your odds of a speedy review To improve your odds of a faster review, tag your draft with relevant WikiProject tags using the button below. This will let reviewers know a new draft has been submitted in their area of interest. For instance, if you wrote about a female astronomer, you would want to add the Biography, Astronomy, and Women scientists tags. Editor resources
Last edited by Ishurio19 (talk | contribs) 2 days ago. (Update) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f1/Apollo_13_splashdown_%28S70-35638%29.jpg/220px-Apollo_13_splashdown_%28S70-35638%29.jpg)
Parachutes in spaceflight
Parachutes and other aerodynamic decelerators have been used extensively in spaceflight and activities above the Armstrong limit, where the conditions are very similar to those found in outer space. The extreme environments in which (near-)spaceflight is conducted have necessitated the development of parachute systems designed to withstand them in order to enable consistently reliable recovery or slow down spacecraft for prolonged data gathering or landing. Parachutes also serve a vital role in human spaceflight and save lives during emergencies involving astronauts. Inflatable and deployable decelerators for aerocapture and deorbiting satellites without the need for propellant have been proposed and are being developed for future missions.
The development of parachutes for space have benefitted all areas where parachutes have been put to use. Although they have been a part of spaceflight for as long as it exists, parachutes are still considered among the most difficult technologies to develop in aerospace, largely because of the difficulties associated with predicting their behavior and that of their deployment systems.[1] Despite this, and the rise of technologies enabling reliable deceleration and recovery without the help of parachutes,[2] they are still favored over those technologies, largely because of their relatively low cost and risk, low weight, small storage volume requirements and wide applicability.
History
editParachutes were invented and developed in parallel with air- and spacecraft. [Goddard? Chinese rocketeers?] They have been innovated on extensively during both World Wars and the Cold War, when they started to become mass-produced and mass-deployed because of tactical and strategic advantages they offer.
The United States Government acquired parachute experts along with other top engineers from Germany during Operation Paperclip, the most prominent of them being Theodor Knacke and Helmut Heinrich.[3] They were tasked with
Considerations
editSpacecraft are usually significantly larger, heavier and faster objects than individual personnel, food boxes and artillery vehicles, resulting in significant challenges for the development of parachutes for spaceflight.
Artefacts descending through an atmosphere create a wake behind them, The parachute is deployed behind that wake.
Space capsules and rockets operate in ballistic, high-g environments [4]
Spaceflight is a high-risk endeavor, and parachutes developed for space missions must meet stringent safety criteria while meeting maximum weight requirements. In many space missions, parachute failure is deemed a single-point failure that prematurely ends or severely compromises a mission.
Properties
editParachutes are relatively lightweight and can be stored in spaces much smaller than their full volume, making them well-suited for use as mechanical decelerators.
[packing?] are packed tightly, often with the assistance of a hydraulic press.
The materials used on parachutes are selected and weighed on the basis of their strength, weight, elasticity and cost. On advanced parachutes, each part is made with a material with different properties.
The heavy objects needing to be slowed down or recovered and fast speeds reached by these objects necessitated the development of multi-parachute systems. To reduce g-forces on the vehicle and occupants, as well as loads on the parachutes, an object deploys a series of parachutes instead of one parachute. For initial slowdown, a spacecraft firstly deploys one or more drogue parachutes, which are smaller and made of stronger fabric. Drogues serve to stabilize the fast-moving payload through its descent in the higher parts of the atmosphere, setting up the right conditions for the main parachute(s) to be deployed at much lower altitudes. [main parachute, also include clusters for redundancy]
Preferably, parachutes are deployed when the velocity of its payload is subsonic, although this is sometimes not possible or most optimal for the mission.
Testing
editParachute systems for spaceflight are subjected to extensive testing regimes to ensure their performance during missions. This includes deployment systems, release systems and associated landing systems, as well as the payload itself. Computer and mechanical simulations are far from sufficient for determining their effectivity and performance. Since [there are computers], fluid structure imagery, but [still not good enough].
Deployment system tests
editParachute deployment systems are as essential for successful landing or recovery of payloads and missions as the parachutes themselves. Most parachutes used in spaceflight need to be successfully deployed without any human intervention. The performance of an entirely automated parachute deployment system of a spacecraft therefore needs to be tested and evaluated thoroughly.
Many deployment systems used in spaceflight are pyrotechnics-based
Vacuum chamber tests are employed to verify proper functioning of rocket and spacecraft avionics systems that signal the right altitude to deploy the parachutes.[5]
Wind tunnel tests
editWind tunnel tests are able to simulate the high loads on parachutes that they will experience during an actual flight,[6] as well as simultaneously test the deployment systems with the parachutes. Many universities and research institutes worldwide have their own wind tunnels, or access to one.
The world's largest wind tunnel is part of the Ames Research Center, and has successfully tested parachutes no more than [feet (m)] in diameter. [disadvantages] Some parachutes, including most of those used for crewed missions, are too large even for the Ames wind tunnel, so subscale parachutes were tested instead. [size does matter]
Drop tests
editDrop tests can be performed by releasing test articles from carrier aircraft, high-altitude balloons[7] and crane helicopters, at varying altitudes up to around the Armstrong limit. They are able to more realistically simulate the loads to be experienced by parachutes while on an actual mission, especially for Earth return missions. They are frequently used to test recovery systems for crewed spacecraft, and are also used to test uncrewed and interplanetary mission recovery systems.
Rocket tests
editSounding rocket tests have been employed for high-altitude and interplanetary entry missions considered important where there is a higher risk of failure. Parachutes, measuring equipment and weight simulators are launched into higher parts of Earth's atmosphere, often Mars-analog conditions.[3] Such tests are noted to be very expensive and not necessary for most missions, most of which took place in parallel with the Apollo program for NASA's first interplanetary entry missions. High-speed parachutes for uncrewed missions find significant benefit in full-scale analog simulations, especially for experimental types of parachute that failed in those tests while having proven to be successful in wind tunnel and drop tests.[3]
Rocket sled tests aim to reproduce these high speeds and high loads on the surface, by attaching the parachute to a rocket-powered railcar.
Performance analysis
editAny parachute used in spaceflight that returns to Earth is preferably recovered for performance analysis. For programs where parachute performance analysis is very important, high-speed cameras are used to analyse the deployment and inflation processes of parachutes, and occasional or [] failures.[3] A point of analysis unique to space parachutes is investigating the effects of exposure to space conditions, including radiation and extreme temperature changes experienced by the payload carrying it.
Recovery procedures for parachutes and their payloads are thorougly rehearsed to prevent damaging or losing the parachutes. Parachutes that are recovered from the ocean are carefully lifted onto recovery vessels, rinsed with fresh water to remove salt and dirt, cleared of wildlife if needed, and hung to dry before they can be inspected. This needs to be done as quickly as possible, because the parachutes may become saturated with sea water and sink to lower parts of the ocean, or drift away. This would result in parachute performance data being lost, and the parachutes becoming environmentally hazardous.
High-altitude payload recovery
editThis section discusses uses of parachutes during recoveries of uncrewed objects launched to (near-)space from Earth back to Earth.
In this article, near-space is defined as the area in Earth's atmosphere between the Armstrong limit, roughly 62,000 feet (19 km) above sea level, and the boundary of outer space at 62 miles (100 km). The Armstrong limit is the point where the air density is low enough for water to boil at human body temperature. Artefacts descending from space and through this portion of the atmosphere can easily reach supersonic speeds without any means of propulsion and become unstable.
Suborbital recovery
editPayloads and (parts of) vehicles on a suborbital trajectory use parachutes to return to Earth for recovery, inspection and/or reuse. Recovery parachutes for high-altitude balloons and sounding rockets are available to consumers off-the-shelf. They can also be sewn from scratch, as long as payload weight, size and shape are taken into account adequately.
High-altitude balloons
editParachutes for high-altitude balloon payloads do not require dedicated extraction or deployment systems. Usually, a hook attaches a balloon to the apex of the parachute, which is in turn attached to a satellite,[8] radiosonde or novelty payload. Parachutes without a vent at the apex come with a loop of fabric for attachment. When the balloon bursts (flight termination), the parachute is usually immediately placed in a position in which it can inflate and slow down its payload. The relatively low speed of the vehicle at flight termination allows for relatively simple parachutes to be used for recovery, despite the high altitude and low density which they are exposed to.
Weather balloon payloads are often single-use, as are their parachutes. During parachute descent, they often drift away from the launch site, sometimes as far as [] . have expressed concerns about environmental pollution
Sounding rockets and amateur rocketry
editMany sounding rockets and most amateur rockets are prefered to be recovered intact. Usually, hardware needs to be recovered in order to collect data on rocket performance or onboard payloads. Recovery of suborbital rockets requires the use of stronger and often multiple parachutes, because of the high, often supersonic or even hypersonic, speeds, and very high altitudes reached by such rockets.[9] This also applies to most amateur and student rockets which do not reach extreme altitudes, because of the high speeds that are still achieved by such rockets.[10]
Deployment systems for suborbital rockets can be relatively simple and similar to skydiving systems, or as advanced as those found in larger spacecraft. Recovery systems may or may not be used on all stages of a rocket. Parachutes flown on any rocket using flammable propellant need to be protected by recovery wadding, heat-resistant recovery bags or other fireproof systems, that prevent them from burning up.[5] Many high-power rockets employ a multistage parachute system, consisting of at least a drogue and a main parachute. Using a main parachute only is not recommended for high-power rockets, because it is very likely that it is shredded at extreme speeds. Instead of drogues or even mains, streamers may be used by small amateur rockets. These strips of fabric stabilize rocket parts by producing a very small amount of drag, so they fall significantly faster than under drogues or mains. These are used if cheaper components are preferred, and/or to prevent rocket parts from drifting far away from the launch site, usually in combination with a main parachute.
Amateur rocketry provides students and other enthusiasts with many opportunities to hands-on improve their skills and increase their knowledge in a variety of engineering topics, including parachutes. It is often supported by governmental space agencies, [commercial entities] Student rocketry clubs usually have teams dedicated to developing and producing parachutes and deployment systems. Students working on parts of rockets, including recovery systems, often write papers on their research and findings during the development process of these systems. [thesis or doctorate assistance][11]
Booster rockets
editEfforts to reduce launch costs led to the development of reusable rocket stages and strap-on boosters, starting with [the space shuttle?] The Space Shuttle solid rocket boosters were the [first? largest?] Ariane 5 boosters
SpaceX attempted to recover the first stages of their Falcon 1 and early Falcon 9 launch vehicles by parachute, but the stages burned up in the atmosphere before they could deploy their parachutes on each attempt.
Recovery of orbital spacecraft
editThe risks associated with landing something from space are [multiplied tenfold or something] for uncrewed spacecraft that return to Earth.
Uncrewed capsules for uncrewed missions are relatively small . Most of them employ drogue parachutes, while some, including the Hayabusa capsules, only employed a main parachute combined with a pilot chute.
Exo-Brake was a NASA program/system for deorbiting small spacecraft at the end of their service life.
Planetary entry
editParachutes have played an important role in the success of interplanetary missions that feature the entry into the atmosphere or landing on the surface of a celestial body. Densities and temperatures of atmospheres, as well as gravitational pulls, vary across the Solar System's celestial bodies, and are often vastly different than Earth's. This complicates landings on other planets or moons with an atmosphere, requiring engineers to not only develop parachutes with specific performance characteristics, but also adapt their deployment systems and sequences. [optimal altitude] [spacecraft releasing their parachutes before touchdown, in both venus and mars].
Most development for planetary entry parachutes took place from the mid-1960s to the mid-1970s, when the US and the Soviet Union extended the Space Race into Mars and Venus. Both parties sought to determine the requirements for landers to successfully touch down on Venus and Mars by sending probes to orbit the planets or enter their atmospheres. The Soviet Union became the first country to have its spacecraft successfully land on and transmit data from both planets in the early 1970s.[12]
Parachutes and inflatable decelerators for interplanetary missions are sterilized by several days of heat-treating before being mated and launched with their payloads to prevent forward contamination.
The expenses and risks associated with landing on other planets has often made one or few successful landings by one entity [satisfactory for all]. Venus landing missions ceased after 1982, with the Soviet Union being the only successful entity out of two countries total.
Textile braking devices [] to achieve aerocapture
Mars
editIts relative similarities with and relatively short distance from Earth compared to other celestial bodies makes Mars a very attractive location for scientific research, and the planet deemed most suitable for being the first outside Earth to become inhabited by humans. For many countries and entities, landing on Mars therefore remains [a goal], and is seen by some scientists and journalists as a prestige project. With more than half of all Mars landing attempts ending in failure, deceleration in the Martian atmosphere has proven to be particularly challenging.
Mars' atmosphere is a hundred times less thick than Earth's. Like on the Moon, spacecraft can only soft-land with the use of retropropulsion,[13] but the presence of an atmosphere requires for a heat shield to be employed as well. As of April 2024, all spacecraft aiming to soft-land on Mars have employed a supersonic parachute.
Weight and size restrictions are stringent for Mars and interplanetary missions, because of the limited amount of thrust launch vehicles have been able to produce. Post-Space Race Mars missions have also dealt with limited budgets. Instead, parachutes have been employed to drastically decelerate a craft in the lower atmosphere of Mars until retropropulsion can be effective. Nevertheless, payloads will still crash on Mars when only using parachutes because, even close to the ground, there is too little air resistance for the terminal velocity to be within the boundaries of a soft landing.
Parachutes used for Mars landings need to withstand very high speeds in low-pressure environments. These supersonic parachutes need to be considerably larger and lighter than drogue parachutes used during Earth returns, increasing the risk of vehicle re-contact, self-contact, tearing and shredding upon deployment and inflation. After the properties of the Martian atmosphere were discovered, NASA tested parachutes in near-space, often Mars-analog conditions in a series of sounding rocket and high-altitude balloon drop tests.
[Although parachutes are found to be reliable, it is increasingly prefered that they are not used on future missions to Mars.] [] JPL engineers have proposed and are testing alternative means to slow down and land the Mars Sample Return lander on Mars to remove the need for parachutes. SpaceX has provided NASA with data on retropropulsion in Mars-analog conditions during its Falcon reusability program, and plans to land its Starship spacecraft on Mars using its heat shield and landing engines only.
Human spaceflight
editAs of 2024, all human-rated spacecraft have used round parachutes for at least a portion of their recoveries. Most spacecraft supporting human missions have relied on parachutes for deceleration in the lower parts of the atmosphere and touchdown; some landed or have been planned to land on a runway with or without the help of deployed decelerators. Although propulsive vertical landing has also been proposed for some spacecraft, parachutes are advantaged by their proven reliability and continue to be used despite their low precision due to susceptibility to changing winds.
Astronauts and high-altitude aviators are trained to use the components of parachutes to make tents, clothing or other items useful for survival after emergency landings. Many of them have gone through extensive training for near-space emergency bailouts and subsequent freefall and parachute descent phases.[14] Parachuting is included in many governmental and private astronaut training programs,[15][16] and furthermore serves to [condition astronauts in doing scary stuff].
Crewed capsule parachutes
editParachute descent is the most frequently employed method of bringing crew and valuable cargo back to Earth safely, and has been used for all crewed capsules and recoverable cargo capsules. [reasons for this include the ability to recover the capsule on almost any surface]
A series of round parachutes have been used for recovery by every human-rated space capsule, although a glider-like parachute was proposed for the Gemini project. The Apollo capsules were the first human-rated spacecraft to use a cluster of multiple parachutes.[17]
The Mercury, Gemini, Soyuz and Shenzhou capsules have employed a single drogue with a single main. The Apollo, Orion and Boeing Starliner capsules have used a system with [pilots, drogues and mains]. The Blue Origin New Shepard and SpaceX Dragon capsules use a simplified multi-parachute deployment system with up to three drogues, which pull out up to four mains when released.
Deployment sequence
editAfter entering the thicker parts of the atmosphere, usually around an altitude of (10-5 km),[18] the capsule deploys one or more drogue parachutes, most often by means of a mortar or mortar-deployed pilot parachute. This may be preceded by the ejection of the capsule's top cover, sometimes descending under its own parachutes to increase safety margins. Depending on the size, weight, speed and safety requirements of the capsule, the drogues remain attached to the capsule for a few seconds to a full minute. The main parachutes are then extracted by either the drogues or pilot parachutes that are fired from their own mortars after the drogues are cut away.
To reduce shock loads and acceleration forces on astronauts and fragile cargo upon deployment, most crew capsule parachutes have their drag coefficient temporarily reduced in a process called reefing. This is usually achieved by rigging one or more lines around the skirt of the parachute that restrict the circumference of the canopy mouth. The lines are then cut by a small machine after a pre-determined amount of seconds. Reefing also reduces and helps to evenly distribute stresses on the canopies and lines, and in particular for larger parachutes, ensures proper inflation.
During parachute descent, ground control informs astronauts on parachute deployment, the speed of descent and the status of the parachutes. The crew, unable to see what happens outside, is notified if the parachutes appear healthy (fully deployed, inflated and undamaged), and if not, what precautions to take. Upon touchdown or splashdown, the main parachute(s) is/are usually released from the capsule to prevent entanglement and inadvertent redirection of the capsule upon re-inflation,[19] and to enable recovery of the parachutes and the capsule. Spacecraft manufacturers [must] ensure that the crew can cut away the parachutes when the parachute fails to release itself or during certain malfunctions.
Uses of parachutes by spaceplanes
editFor spaceplanes, parachutes are often not necessary because the shape of these vehicles allows for them to be flown like gliders in the lower parts of the atmosphere and landed like any other airplane. Use of drag chutes is still prefered, because of the higher landing speeds of such spacecraft than is usual for aircraft.
In the later years of its service, the Space Shuttle used a [diameter] brake chute to help slow itself down. Research conducted after the Challenger disaster found that [erosion of the wheels]. Drogue parachutes were used starting from the maiden flight of Endeavour (STS-49) in 1992 [?], and all Shuttles were equipped with drogues by []. The parachute was deployed by a pilot chute and released just before the Shuttle came to a standstill (wheels stop) and retrieved after use. Each parachute was reused up to ten times.
The NASA X-38, a proposed lifeboat vehicle for ISS crewmembers, would have used a parachute much in the way space capsules do. It was designed to deploy its parachute while still in the air and descend under canopy.
Near-space emergency egress
editFlying above 40.000 feet (12 km) became increasingly common practice during the Second World War, and many concerns on parachute behavior during high-altitude bailouts had already surfaced by then.[20] Aircraft capable of long-duration operations above the Armstrong limit were developed not much later, proving to be crucial for surveillance capabilities during the Cold War. To address existing concerns on high-altitude emergency egress and uncover new ones, both the US and the Soviet Union undertook several development programs from the 1940s to 1960s to enable their military pilots to survive bailing out at extreme altitudes and usually supersonic horizontal speeds during emergencies. Under these programs, great benefit was found in the use of drogue parachutes for stabilizing personnel falling from high altitudes, and delaying the opening of main parachutes until thicker parts of the atmosphere are reached.[20] During and since the Cold War, there have been numerous incidents involving high-altitude aircraft in which the crew were forced to eject, egress in or otherwise made to descend on their own in the conditions of near-space,[21] including the 1960 U-2 incident.[22]
Similarly, to protect them from the hazards of high altitude during emergencies, Space Shuttle astronauts flying before STS-5 and after STS-51L wore a full pressure suit and a 72 lbs (32 kg) parachute pack with emergency supplies during launch and reentry.[23] During the first four Shuttle flights, astronauts had the capability to eject from the spacecraft during a malfunction at virtually any altitude during ascent or descent. This capability was previously found in the Gemini crew capsule. After STS-4, Space Shuttle Columbia had its ejection seats deactivated, and all other Shuttles were not outfitted with crew ejection systems; because the Space Shuttle always flew with at least four crew after the testing campaign, ejection seats were considered impractical. [was met with criticism from pilots and other personnel] Escape pods were proposed for the Space Shuttle to be used sometime after STS-5, [but that did not go through]. After the Challenger disaster, the remaining Shuttle orbiters were modified to enable emergency egress of up to eight crew when the spacecraft was in a stable position at no higher than 60.000 feet (18 km). Astronauts would leave the spacecraft by sliding down a pole they deployed from the ingress hatch to avoid recontact with the shuttle,[23][24] before automatic systems would deploy their parachutes at an appropriate altitude.[25]
Joseph Kittinger for Project Excelsior and, to a lesser extent, Yevgeny Andreyev was the test person for a similar research project in the Soviet Union, and became the long-time record holder of the highest freefall jump.
[Since the [], scholars have [] if an astronaut could survive returning to Earth from space or even orbit with only a spacesuit] , , [] after the jumps of and in the 1960s [led to people trying to copy those freefall jumps ]. Felix Baumgartner's stratospheric skydive in 2012 was the first successful attempt at breaking Kittinger's and Andreyev's long-standing records, and rekindled interest and enthusiasm for high-altitude parachute jumps and the associated research on its effects on people and parachutes. Two years later, former Google executive Alan Eustace broke the record for highest-altitude parachute jump after working with a team of scientists and engineers, [telling that question was an inspiration]
Types of parachute developed for or frequently used in spaceflight
editThe complex and wide-compassing process of addressing the challenges of deceleration in spaceflight and near-space activities has resulted in the invention and development of many types of parachute. They vary greatly in strength, porosity, size and function, so there are parachutes fit for almost every circumstance involving an atmosphere. Some have known widespread use in areas outside of spaceflight, while others are specifically tailored to the extremes of space.
Ribbon parachutes
editRibbon parachutes are very tolerant to high speeds, due to their high porosity. Their invention is attributed to Theodor Knacke [was he part of the FIST team that is accredited with its invention in the 1930s?]. The canopies of ribbon parachutes consist of dozens of rings ('ribbons') of thick, high-strength fabric roughly one or two inches (several centimeters) wide, separated by gaps approximately the same size. They are often reused, even those used in spaceflight recoveries.
Conical ribbon
editConical ribbon parachutes have known extensive use in aerospace.[26] have the highest drag coefficient for high-porosity parachutes. [why?]
Conical ribbon parachutes have served as braking parachutes for high-altitude aircraft and spaceplanes, including the SR-71 Blackbird and the Space Shuttle. They have also been instrumental in the recovery systems of most space capsules, where they have been employed as drogue parachutes. A conical ribbon parachute served as the final slowing mechanism for the Galileo entry probe during its descent through Jupiter's atmosphere.
Hemisflo ribbon
editHemisflo ribbon parachutes are ribbon parachutes specifically designed to stabilize and decelerate payloads at speeds up to Mach 3. Its name is derived from []
Hyperflo ribbon
editRingslot
editThe Ringslot is a derivative design to the conical ribbon, with larger and fewer rings and gaps between them. This type was also developed by Knacke, while at Wright-Patterson Air Force Base.[26] Parachutes of this type are often made of thinner material than ribbon parachutes. In spaceflight, they have found extensive use as extraction parachutes for drop tests, braking chutes and pilot chutes.
Ringsail
editAnother derivative of the ribbon parachute is the ringsail, invented in 1955 by Ed Ewing. It improved on the Ringslot design by increasing its drag coefficient through [the use of sails, or pockets]. Although more expensive to produce than most other parachutes, this type is renowned for its high reliability, low opening shock loads and tolerance to damage, making it the ideal round parachute for crewed Earth returns.[17] Ringsail parachutes have been used as main parachutes for all American crewed capsule recoveries [and Shenzhou?]. They were also deemed exceptionally suitable for supersonic deceleration, although they have fallen out of favor
Solid cloth
editSolid cloth parachutes consist of a single sheet of fabric, often divided into sections, or gores, for structural reinforcement.[26] These are the simplest parachutes used in spaceflight. Their simplicity makes them cheap and relatively easy to produce. NASA's Stardust and OSIRIS-REx[27] sample return missions used a solid cloth triconical parachute as a main parachute.
Disk-Gap-Band
editThe Disk-Gap-Band (DGB) is a round solid-cloth parachute with [a gap in the cloth between the crown and skirt fabric]. The large gap increases porosity significantly, allowing excess air to escape. The DGB design is renowned for its balance in drag and stability while being relatively cheap and simple. Invented by Clinton W. Eckstrom in the late 1960s, it was initially designed for the recovery of high-altitude meteorological research payloads, and proved to be adept to extreme speeds and low air densities. NASA performed a series of high-altitude supersonic drop and flight tests to improve on its design for the Viking missions, for which it was eventually selected.[28] The DGB is the prefered parachute for interplanetary atmospheric entries and has been used on all successful Mars landing missions.[3] They remain an often-used type of parachute for high-altitude Earth recoveries, including some Long March rocket stages.
Disksail
editThe Disksail parachute was developed by JPL engineers as part of the LDSD program, which sought to develop more advanced deceleration systems for the Mars 2020 mission. It combined the properties of the established DGB and Ringsail types, aiming to produce a stronger parachute. This type of parachute was retired from development after a series of dissatisfactory tests.
Cruciform
editCruciform parachutes are solid-cloth parachutes that inflate in a shape akin to a cross or a box. They were developed for military and aerospace purposes to reduce oscillation. Cross-shaped parachutes served as the main parachutes for the Hayabusa and Hayabusa2 asteroid sample return missions. A similar cross-shaped braking device was tested during the ExoBrake program by NASA.
Guide surface
editBallute
editThe ballute, a parachute that inflates into a balloon-like shape, is designed for high-speed decelerations in upper atmospheres. It is used as a high-speed, low-density drogue parachute, and has proven to be adept to speeds with higher Mach numbers than most other drogues because of the small and slim shape of trailing ballutes compared to other parachutes. They have been tested at analog speeds of up to Mach 10.
Certain types of ballute are integrated in the entry vehicle, expanding the surface area of the vehicle when inflated, and increasing air resistance even in near-space. Applications for ballutes as heat shields and aerocapture devices are being studied.
Ram-air/Parafoil
editAs the most frequently employed parachute by sports and elite military parachutists today, parafoils are often worn by astronauts and other personnel involved in spaceflight training, recovery and emergencies. Additionally, they have been employed for uncrewed payloads where steerability of the parachute is deemed beneficial or necessary for mission success.
In many of these cases, programs using these parachutes for spacecraft failed, were cancelled, or opted for the use of round parachutes instead. NASA's X-38 spaceplane would have used the world's largest parafoil for recovery. It was also to be used as the main parachute for the Genesis sample return mission. Rocket Lab proposed to recover their Electron first stages with the help of ram-air parachutes, which would have been latched on a helicopter crane while mid-air.
Successful uses of the parafoil in spaceflight include the SpaceX Falcon 9 and Falcon Heavy fairing half recovery systems, and [multiple Chinese attempts to recover rocket parts]
Rogallo wing
editThe rogallo wing is [hang-glider] It was proposed for the Gemini capsule's landing system, similar to the X-38.
Notable missions
editThe following space or near-space missions (in chronological order) are noted for having full or partial parachute malfunctions during recovery, or having made significant contributions to advancing parachute technologies.
CORONA program
editSoyuz 1
editThe Soyuz spacecraft was developed by the Soviets during the Space Race, with the intention to launch cosmonauts to the Moon. Vladimir Komarov was the pilot and only occupant of the spacecraft's first flight, Soyuz 1. and impacted the ground, killing Komarov.
This accident showed [the impatience and lack of carefulness] , similar to the Apollo 1 fire on the US side. After Soyuz 1, the Soviets performed at least 70 drop tests
Apollo 15
editViking 1 & 2
editVenera []
editGenesis
editGenesis was a NASA mission aimed at collecting particles from the Sun (?)
The capsule would have deployed a DGB drogue at an altitude of [33ish km] and Mach [1.4ish], and a ram-air main parachute at []. Both parachutes never deployed and the capsule crashed with a speed of [] onto []. This was the result of both redundant [] meters being installed upside down. The contents of the capsule underwent a special cleaning procedure and were largely saved from contamination.
Huygens
editNASA tasked the European Space Agency (ESA) do develop Huygens. The parachute system was developed by British company Vorticity [?]. It consisted of a series of DGB parachutes to better control descent rates, as the capsule had limited battery power. As of 2024, it is the furthest parachute descent and landing of an object from Earth away from its launch site.
SpaceX Demo-2
editIn 2014, SpaceX and Boeing were selected to deliver the successors to the Space Shuttle for NASA's human space transportation efforts. Both companies opted to develop capsules, prompting a return to parachute descents for American human spacecraft. Developing the Ringsail main parachutes for Crew Dragon and Starliner, respectively, proved to be a major challenge for both companies and their supplier Airborne Systems, undergoing many parachute test failures before crucial milestones.[1]
In the case of SpaceX, a single-out drop test, in which one of the main parachutes [and a drogue?] was intentionally disabled, failed after the other three parachutes malfunctioned [upon deployment and inflation or during later phases]. This test took place shortly after the company's successful uncrewed test flight of Crew Dragon in March 2019. Due to previous failures, SpaceX Dragon capsules have flown with four parachutes instead of the usual three since the mid-2010s. The resulting Mark 3 parachute system (Mk3) was subjected to an intensive testing regime. Personnel performed 13[?] drop tests of these main parachutes over the course of seven days in October/November 2019. As a part of this testing regime, Mk3 parachutes were flown on another uncrewed Dragon launch in January 2020. The Mk3 parachutes have the highest strength-to-weight ratio of any subsonic parachute ever developed for aerospace.
OSIRIS-REx
editOSIRIS-REx collected [grams] of samples from the near-Earth asteroid 101955 Bennu on []. Akin to Genesis, the samples were returned to Earth by means of capsule and parachute. During descent, the capsule's drogue parachute did not deploy because of electrical wiring faults. Instead, its connection to the main parachute was severed[29] at the moment it was intended to be deployed by mortar, at an altitude of 110.000 feet (31.3 km) and a speed of Mach 1.35.[27] [mains miscomm] Despite this malfunction, the main parachute was deployed safely at an altitude of 9,000 feet () and remained healthy until the capsule touched down on Dugway Proving Ground, Utah.
References
edit- ^ a b Fernholz, Tim (2019-11-05). "Why are parachutes such a problem for space travel?". Quartz. Retrieved 2024-04-06.
- ^ SpaceXcentric. Why SpaceX & NASA Struggle with Parachutes. Retrieved 2024-04-06 – via www.youtube.com.
- ^ a b c d e Koerner, Brendan I. "The Supersonic Parachutes Carrying NASA's Martian Dreams". Wired. ISSN 1059-1028. Retrieved 2024-04-08.
- ^ Chertok, B. E. (2005). Rockets and people. The NASA history series. Washington, D.C: NASA : For sale by the Supt. of Docs., U.S. G.P.O. p. 187. ISBN 978-0-16-076672-5.
- ^ a b NASA Student Launch (2023-07-24). "NASA Student Launch ARW: Recovery Systems" (PDF).
- ^ Kelsay, Connor. "Terminal Pressure—Designing a Parachute to Land the Perseverance Rover". Parachutist Magazine. Retrieved 2024-04-06.
- ^ Lewis, Marie (2018-03-30). "Parachute Testing Lands Partners Closer to Crewed Flights". Retrieved 2024-04-13.
- ^ North Atlantic Treaty Organization (2020-11-25). "NATO Science presents: High-altitude balloon-borne radar".
- ^ "DLR STERN II Project – HyEnD – Hybrid Engine Development" (in German). Retrieved 2024-05-09.
- ^ Joe Barnard & BPS.space. Rocket Recovery System - Building Lumineer. Retrieved 2024-04-06 – via www.youtube.com.
- ^ House, Marie (2019-05-24). "The Design and Development of an Electromechanical Drogue Parachute Line Release Mechanism for Level 3 High-Power Amateur Rockets". University Honors Theses. doi:10.15760/honors.770.
- ^ Heil, Andy (2020-08-02). "The Soviet Mars Shot That Almost Everyone Forgot". Radio Free Europe/Radio Liberty. Retrieved 2024-05-10.
- ^ Siddiqi, Asif A. (2018). Beyond Earth: a chronicle of deep space exploration, 1958-2016. NASA SP. United States, United States. Washington, DC: National Aeronautics and Space Administration, Office of Communications, NASA History Division. p. 43. ISBN 978-1-62683-043-1.
- ^ "NASA's Glorious History of Training Astronauts | Science | WIRED". web.archive.org. 2014-04-12. Retrieved 2024-07-17.
- ^ Canadian Space Agency (2008-03-31). "Basic training". Canadian Space Agency. Retrieved 2024-07-17.
- ^ "Soviet urges space cooperation". Lawrence Journal-World newspaper. October 16, 1990.
- ^ a b Delurgio, Philip R. (1999-06-08). "EVOLUTION OF THE RINGSAIL PARACHUTE" (PDF).
- ^ "Soyuz parachutes to Safe Landing – Space Station Crew returns after 186 Days in Orbit – Soyuz TMA-19M | Spaceflight101". 2016-06-18. Retrieved 2024-04-21.
- ^ Čertok, Boris E. (2011). Rockets and people. 4: The moon race / Boris Chertok. NASA SP. Washington, DC: National Aeronautics and Space Administration, Office of Communications, History Program Office. pp. 165–166. ISBN 978-0-16-089559-3.
- ^ a b U.S. Air Force Air Materiel Command (1950-09-18). "Memorandum Report on High-Altitude Bailouts" (PDF). MCREXD-695-66M.
- ^ Miller, Linda Sheffield (2022-06-05). "SR-71 Pilot explains how he Survived to his Blackbird Disintegration at a Speed of Mach 3.2". The Aviation Geek Club. Retrieved 2024-04-13.
- ^ Bantser, Sergey. "Как сбили Пауэрса" [How Powers was shot down] (in Russian). Archived from the original on 27 June 2020.
- ^ a b Betancourt, Mark. "They Said It Wasn't Possible to Escape the Space Shuttle. These Guys Showed It Was". Smithsonian Magazine. Retrieved 2024-04-08.
- ^ Dismukes, Kim. "Inflight Crew Escape System". NASA Space Shuttle. Archived from the original on 2000-08-17.
- ^ Carruth, Alivia R. (2023-03-13). "Spacesuits Built to Handle Pressure - NASA". Retrieved 2024-04-06.
- ^ a b c Guglieri, Giorgio. "Introduction to Parachute Subsonic Aerodynamics". yumpu.com. Retrieved 2024-04-06.
- ^ a b Ajluni, Thomas; Everett, David; Linn, Timothy; Mink, Ronald; Willcockson, William; Wood, Joshua (2015-06-08). "OSIRIS-REx, returning the asteroid sample". 2015 IEEE Aerospace Conference. IEEE: 1–15. doi:10.1109/AERO.2015.7118988. ISBN 978-1-4799-5379-0.
- ^ Clark, Ian; Tanner, Christopher (2017-03-11). "A historical summary of the design, development, and analysis of the disk-gap-band parachute". 2017 IEEE Aerospace Conference. IEEE: 1–17. doi:10.1109/AERO.2017.7943854. ISBN 978-1-5090-1613-6.
- ^ "NASA Finds Likely Cause of OSIRIS-REx Parachute Deployment Sequence – OSIRIS-REx Mission". blogs.nasa.gov. 2023-12-05. Retrieved 2024-03-09.