![]() | This is the sandbox page where you will draft your initial Wikipedia contribution.
If you're starting a new article, you can develop it here until it's ready to go live. If you're working on improvements to an existing article, copy only one section at a time of the article to this sandbox to work on, and be sure to use an edit summary linking to the article you copied from. Do not copy over the entire article. You can find additional instructions here. Remember to save your work regularly using the "Publish page" button. (It just means 'save'; it will still be in the sandbox.) You can add bold formatting to your additions to differentiate them from existing content. |
Article Draft
editLead
editA flame test, invented by Robert Bunsen, is a qualitative analysis technique used in chemistry to detect the presence of certain elements, primarily metal ions, based on each element's characteristic flame emission spectrum (which may be affected by the presence of chloride ions)[1][2][3][4][5][6]. The color of the flames is understood through the principles of atomic electron transition and photoemission, where varying elements require distinct energy levels (photons) for electron transitions[2][4][6][7]. The color of the flames also generally depends on temperature and oxygen fed; see flame colors[8]. The procedure uses different solvents and flames to view the test flame through a cobalt blue glass to filter the interfering light of contaminants such as sodium[6][9]. Wooden splints, Nichrome wires, cotton swabs, and melamine foam are suggested for support[4][10][11][12]. Safety precautions are crucial due to the flammability and toxicity of some substances involved[13][14][15]. The test provides qualitative data; therefore, obtaining quantitative data requires subsequent techniques like flame photometry or flame emission spectroscopy[1][16].
Article body
editHistory
editRobert Bunsen invented the now-famous Bunsen burner in 1855, which was useful in flame tests due to its non-luminous flame that did not disrupt the colors emitted by the test materials[1][3]. The Bunsen burner combined with a prism (filtering the color interference of contaminants), led to the creation of the spectroscope, capable of emitting the spectral emission of various elements[3]. In 1860, the unexpected appearance of sky-blue and dark red was observed in spectral emissions by Robert Bunsen and Gustav Kirchhoff leading to the discovery of two alkali metals, caesium (sky-blue) and rubidium (dark red)[1][3]. Today, this low-cost method is used in secondary education to teach students to detect metals in samples qualitatively[2].
Principle
editIn flame tests, energy is emitted by the flame in the form of heat. When an atom or an ion absorbs the energy, electrons will jump from a lower energy level (the highest occupied molecular orbital, or HOMO at an unexcited state) to a higher energy level (the lowest occupied energy orbital, or LUMO at an excited state), and later fall back to their normal energy level (unexcited state)[4]. As they fall back, they release energy in the form of photons, which are responsible for the light[4].
For the transition metals, the electrons can be promoted via metal to ligand charge transfer (MLCT), ligand-to-metal charge transfer (LMCT) or d-d transitions[17]. MLCT is when an electron from the set or the set (more metal in character) is transferred to the u set (more ligand in character)[17]. LMCT is when an electron from or orbital (more ligand in character) is promoted to orbital (more metal in character)[17]. The d-d transition involves transferring an electron from set to set[17].
Different atoms or ions require different amounts of energy to promote one electron to one orbital higher than its normal state[4]. Electron excitation occurs at specific energy levels, indicating that the energy is quantized and corresponds to specific wavelengths (or frequencies)[7]. Therefore, as the electrons of different atoms fall to their unexcited energy levels, they will emit different amounts of energy, corresponding to lights of different wavelengths and frequencies[7]. This allows for the detection of different atoms.
In general, a larger transition between energy levels requires higher energy and will emit higher energy photons[5]. If the photons are in the visible region of the light spectrum (wavelength 380–700 nm), a colored light emitted by the material is observed with the naked eye[5][18]. If the energy of the emitted photons is higher or lower than 380–700 nm, light will be emitted in the infrared, ultraviolet, or other regions of the electromagnetic spectrum that cannot be observed with the naked eye[4][7].
Safety hazards
edit- Methanol is a highly flammable liquid. A flame test or “rainbow demonstration” that uses methanol should be performed under a fume hood to prevent flash fires or deflagrations[13].
- Barium chloride is toxic[14]. It is important to prevent ingestion of the salt or solution[14].
- Open flames (Bunsen burner or propane torch) are sources of fire hazards[14]. It is important to ensure the experiment area is free of flammable materials.
- “Flame jetting”[15] occurs when an excess flammable solvent is added to a burning or previously ignited setup, causing vapors to flash back into the solvent container, causing a torch[15]. It is important to not add excess solvent when flames diminish.
Common elements
editSome common elements and their corresponding colors are:
Symbol | Name | Color [8] | Image |
---|---|---|---|
Al | Aluminium | Silvery white; in very high temperatures such as an electric arc, light blue | |
As | Arsenic | Blue | |
B | Boron | Bright green | |
Ba | Barium | Light apple green | |
Be | Beryllium | White | |
Bi | Bismuth | Azure blue | |
C | Carbon | Bright orange | |
Ca | Calcium | Brick/orange red; light green as seen through blue glass. | |
Cd | Cadmium | Brick red | |
Ce | Cerium | Yellow | |
Co | Cobalt | Silvery white | |
Cr | Chromium | Silvery white | |
Cs | Caesium | Blue violet | |
Cu(I) | Copper(I) | Blue-green | |
Cu(II) | Copper(II) (non-halide) | Green | |
Cu(II) | Copper(II) (halide) | Blue-green | |
Ge | Germanium | Pale blue | |
Fe(II) | Iron(II) | Gold; when very hot such as an electric arc, bright blue, or green turning to orange-brown | |
Fe(III) | Iron(III) | Orange brown | |
H | Hydrogen | Pale blue | |
Hf | Hafnium | White | |
Hg | Mercury | Red | |
In | Indium | Indigo blue | |
K | Potassium | Lilac (pink); invisible through cobalt blue glass (purple) | |
Li | Lithium | Carmine red; invisible through green glass | |
Mg | Magnesium | Colorless due to the Magnesium Oxide layer, but burning Mg metal gives an intense white | |
Mn(II) | Manganese(II) | Yellowish green | |
Mo | Molybdenum | Yellowish green | |
Na | Sodium | Bright yellow; invisible through cobalt blue glass. See also Sodium-vapor lamp | |
Nb | Niobium | Green or blue | |
Ni | Nickel | Colorless to silver-white | |
P | Phosphorus | Pale blue-green | |
Pb | Lead | Blue-white | |
Ra | Radium | Crimson red | |
Rb | Rubidium | Violet red | |
Sb | Antimony | Pale green | |
Sc | Scandium | Orange | |
Se | Selenium | Azure blue | |
Sn | Tin | Blue-white | |
Sr | Strontium | Crimson to scarlet red; yellowish through green glass and violet through blue cobalt glass | |
Ta | Tantalum | Blue | |
Te | Tellurium | Pale green | |
Ti | Titanium | Silver-white | |
Tl | Thallium | Pure green | |
V | Vanadium | Yellowish green | |
W | Tungsten | Green | |
Y | Yttrium | Carmine, crimson, or scarlet red | |
Zn | Zinc | Colorless to blue-green | |
Zr | Zirconium | Mild/dull red |
Gold, silver, platinum, palladium, and a number of other elements do not produce a characteristic flame color, although some may produce sparks (as do metallic titanium and iron); salts of beryllium and gold reportedly deposit pure metal on cooling[6].
References
edit- ^ a b c d "Robert Bunsen and Gustav Kirchhoff". Science History Institute. Retrieved 2023-10-21.
- ^ a b c Moraes, Edgar P.; da Silva, Nilbert S. A.; de Morais, Camilo de L. M.; Neves, Luiz S. das; Lima, Kassio M. G. de (2014-11-11). "Low-Cost Method for Quantifying Sodium in Coconut Water and Seawater for the Undergraduate Analytical Chemistry Laboratory: Flame Test, a Mobile Phone Camera, and Image Processing". Journal of Chemical Education. 91 (11): 1958–1960. doi:10.1021/ed400797k. ISSN 0021-9584.
- ^ a b c d "This Month in Physics History". www.aps.org. Retrieved 2023-11-02.
- ^ a b c d e f g "Flame Tests". Chemistry LibreTexts. 2013-10-03. Retrieved 2023-10-24.
- ^ a b c "8: Flame Tests of Metal Cations (Experiment)". Chemistry LibreTexts. 2017-10-31. Retrieved 2023-10-24.
- ^ a b c d "Flame Test | Explanation, Definition, Information & Summary". Chemistry Dictionary. 2019-10-14. Retrieved 2023-11-02.
- ^ a b c d Wacowich-Sgarbi, Shirley; Langara Chemistry Department (2018). "8.2 Quantization of the Energy of Electrons". Pressbooks BC Campus.
- ^ a b Helmenstine, Anne (2022-06-15). "Flame Test Colors and Procedure (Chemistry)". Science Notes and Projects. Retrieved 2023-11-01.
- ^ "Flame Test". Chemistry LibreTexts. 2019-05-14. Retrieved 2023-11-19.
- ^ "flame tests". www.chemguide.co.uk. Retrieved 2023-11-19.
- ^ Sanger, Michael J.; Phelps, Amy J.; Catherine Banks (2004-07-01). "Simple Flame Test Techniques Using Cotton Swabs". Journal of Chemical Education. 81 (7): 969. doi:10.1021/ed081p969. ISSN 0021-9584.
- ^ Landis, Arthur M.; Davies, Malonne I.; Landis, Linda; Nicholas C. Thomas (2009-05-01). ""Magic Eraser" Flame Tests". Journal of Chemical Education. 86 (5): 577. doi:10.1021/ed086p577. ISSN 0021-9584.
- ^ a b "Safety Alert: Do Not Use Methanol-Based Flame Tests on Open Laboratory Desks | NSTA". www.nsta.org. Retrieved 2023-10-24.
- ^ a b c d Emerson, Jillian Meri. "New and Improved -- Flame Test Demonstration ("Rainbow Demonstration")". American Chemical Society.
- ^ a b c Sigmann, Samuella B. (2018-10-09). "Playing with Fire: Chemical Safety Expertise Required". Journal of Chemical Education. 95 (10): 1736–1746. doi:10.1021/acs.jchemed.8b00152. ISSN 0021-9584.
- ^ "Atomic Absorption Spectroscopy (AAS)|PerkinElmer". www.perkinelmer.com. Retrieved 2023-11-19.
- ^ a b c d "Electronic Spectroscopy - Interpretation". Chemistry LibreTexts. 2013-10-02. Retrieved 2023-11-20.
- ^ "Visible Light - NASA Science". science.nasa.gov. Retrieved 2023-10-24.