Talk:List of integrated circuit packaging types
![]() | This article is rated List-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | |||||||||||||||||||||||||||||||||
|
![]() | It is requested that a photograph be included in this article to improve its quality.
The external tool WordPress Openverse may be able to locate suitable images on Flickr and other web sites. |
![]() | The contents of the List of integrated circuit package dimensions page were merged into List of integrated circuit packaging types on 25 November 2016. For the contribution history and old versions of the redirected page, please see its history; for the discussion at that location, see its talk page. |
Untitled
editThis page no longer seems to be a stub. In addition, there are many references. As such I feel that removal of both the references needed and stub templates is in order. —Preceding unsigned comment added by Anon423 (talk • contribs) 02:29, 23 July 2010 (UTC)
References 2, 3, 4, 5, 6, 9, 11, 12, 13, 15, 16, 19 and 20 are dead, leaving only nine real links. 195.11.201.126 (talk) 11:01, 31 December 2014 (UTC)
Butterfly package for laser diodes
editI don't find the butterfly package for laser diodes, this is an industry standard package but maybe I overlooked it in the list as it might go by another industry name? see e.g. http://www.thorlabs.de/NewGroupPage9.cfm?ObjectGroup_ID=1558 (the specs section) for the type of package I mean by Butterfly. Maybe put "Butterfly package" between brackets if it is already in the list? —Preceding unsigned comment added by 130.37.34.36 (talk) 08:20, 12 April 2011 (UTC)
Stress the acronyms or the full names?
editWhen I cleaned up the list, I chose to stress the acronyms, because that is what you see most often in datasheets. Alternatively, you could have made the names be linkified and had the acronyms in parentheses after the links. That would be okay. Just make sure to be consistent. DavidGrayson (talk) 19:24, 2 March 2009 (UTC)
PAC
editI don't see Pin Array Cartridge (PAC) in the list, which was the package used for the orginal Itanium (PAC418). See Eighth-Generation (64-Bit Register) Processors.
- I added PAC using a reference with a better picture. Obankston (talk) 05:10, 14 March 2010 (UTC)
Merge article
editShould this page be merged with List of electronics package dimensions? They seem to cover the same ground. -- Malvineous (talk) 04:02, 26 March 2010 (UTC)
I agree with Malvineous -- there's a lot of overlap between the two, so merging into a single article seems better. Done I also suggest merging the "Surface-mount technology#Packages" section into this list of integrated circuit packaging types, leaving behind a brief WP:SUMMARY. --DavidCary (talk) 18:41, 12 September 2013 (UTC) It seems like a lot of info to be used in one article. — Preceding unsigned comment added by 2601:404:C202:A576:404:7251:4AEF:2303 (talk) 01:03, 30 March 2016 (UTC)
"Chip carrier" is not the general name for an IC package
editThe industry seems to call only a few particular packages "chip carrier", not DIP , etc. packages. --Wtshymanski (talk) 22:41, 15 December 2011 (UTC)
- The secret to an uncontroversial career on Wikipedia is to only edit parts-list articles that no-one cares about. --Wtshymanski (talk) 04:50, 22 December 2011 (UTC)
Merge information from Leadless chip carrier to this article
editIt has been proposed that information from the Leadless chip carrier be merged into this article. In this case, this would be a reasonable merge, as long as all pertinent information in the "Leadless chip carrier" article is merged verbatim. Northamerica1000(talk) 12:29, 31 December 2011 (UTC)
- So be bold! I've had one shot at it, now it's your turn. --Wtshymanski (talk) 19:49, 31 December 2011 (UTC)
External links modified
editHello fellow Wikipedians,
I have just added archive links to one external link on List of integrated circuit packaging types. Please take a moment to review my edit. If necessary, add {{cbignore}}
after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}}
to keep me off the page altogether. I made the following changes:
- Added archive https://web.archive.org/20110818161952/http://ir.conexant.com/releasedetail.cfm?ReleaseID=431800 to http://ir.conexant.com/releasedetail.cfm?ReleaseID=431800
When you have finished reviewing my changes, please set the checked parameter below to true to let others know.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—cyberbot IITalk to my owner:Online 17:16, 14 January 2016 (UTC)
Images request
editHi all, I'm just getting into this subject for work. It would be really helpful to have pictures from each family of package types, if anyone can supply them?
Cheers Comrade jo (talk) 12:23, 19 April 2016 (UTC)
I think this is a great idea. Would it be worth adding another column to the table and inserting a small image inside?
External links modified
editHello fellow Wikipedians,
I have just modified 2 external links on List of integrated circuit packaging types. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20110815143522/http://www.national.com/ms/PA/PACKING_CONSIDERATIONS__METHODS__MATERIALS_AND_REC.pdf to http://www.national.com/ms/PA/PACKING_CONSIDERATIONS__METHODS__MATERIALS_AND_REC.pdf
- Added archive https://web.archive.org/web/20081120103405/http://cpu.linuxmania.net/liste/cpuinfo/chip-package/SIDEBRAZE_DIP/chip-package-sidebraze.htm to http://cpu.linuxmania.net/liste/cpuinfo/chip-package/SIDEBRAZE_DIP/chip-package-sidebraze.htm
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 23:10, 30 December 2017 (UTC)
External links modified
editHello fellow Wikipedians,
I have just modified 5 external links on List of integrated circuit packaging types. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20120218205030/http://www.national.com/packaging/parts/CERPACK.html to http://www.national.com/packaging/parts/CERPACK.html
- Added archive https://web.archive.org/web/20071021023517/http://www.national.com/packaging/parts/CQGP.html to http://www.national.com/packaging/parts/CQGP.html
- Added archive https://web.archive.org/web/20110213050709/http://www.national.com/analog/packaging/llp to http://www.national.com/analog/packaging/llp
- Added archive https://web.archive.org/web/20100801065223/http://www.national.com/analog/packaging/appnote_msmd to http://www.national.com/analog/packaging/appnote_msmd
- Added archive https://web.archive.org/web/20150108015729/https://www.fairchildsemi.co.jp/collateral/product_overview/TinyLogic-Device-Product-Overview.pdf to https://www.fairchildsemi.co.jp/collateral/product_overview/TinyLogic-Device-Product-Overview.pdf
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 15:42, 14 January 2018 (UTC)
DATE COLUMN IN CHART NEEDED
editI think a date column needs to be added to the charts to show when the newer sizes and technologies came into existence and possibly when the older sizes were deprecated. I would think all of the "inch" sizes are obsolete and by now would be considered legacy. — Preceding unsigned comment added by Ametrica (talk • contribs) 13:13, 27 May 2018 (UTC)
Dimension reference
editI think all dimension references should be changed. The reference symbol do not align with any package datasheet from manufacturers:
- Pitch should be "e", not "P"
- Width of terminal should be "b", not "LW".
- Length of terminal should be "L", not "LL".
- Thickness of terminal should be "c", not "T".
- Overall width should be "E", not "WL".
- Molded body width should be "E1", not "WB".
- Overall width should be "D", not "L".
- Clearance between body and seating plane should be "A1", not "C". It's not an important parameter and shouldn't be listed anyway.
- The total height (from tip of terminals to top of the molded body) is not very important.
- Instead, the distance between the seating plane and the top of molded body (which is "A") should be listed