Talk:Linkwitz–Riley filter

Latest comment: 7 years ago by InternetArchiveBot in topic External links modified

Definite article

edit

Do we need a definite article in The Linkwitz-Riley filter? Definite articles refer to particular or specfic things, and here we are talking about L-R filters in general. So I suggest using A Linkwitz-Riley filter instead. This would be consistent with Elliptical filter, Comb filter and Bessel filter. They used the definite article for Butterworth filter tho.


"compared to Butterworth crossovers, whose summed output has a +3 dB peak around the crossover frequency. "

I've encountered this statement before, and it seems to me that this cannot possibly be true since the only consistent definition of crossover frequency is the frequency where the high-pass and low-pass filter yield equal magnitude, and as long as both filters yield -3dB at that frequency, they must add up to 0 dB, not +3 dB. It is therefore a question of the frequency spacing of the high-pass and low-pass sections. There is evidently some rationale by which the two sections should be separated in frequency, such that some other criteria is satisfied, and when this criteria is satisfied, the consequence is that at the frequency where the two sections yield equal magnitude, they each yield less than -3 dB of attenuation. So rather than just make a statement of this sort, it would be much nicer if the criteria is explained, i.e., the criteria for the frequency spacing of the high-pass and low-pass sections that results in this circumstance of the two sections summing to 3 dB at the crossover point. Perhaps this has to do with this being the one point where the two sections are aligned in phase. If so, this should be explained.

72.150.130.231 (talk) 18:40, 21 February 2010 (UTC)Reply

Phase considerations

edit

Saying that the Sum of two Butterworth-filters results in "+3dB" is misleading. That would only be true if the filters are (of the same) linear phase (e.g. digital FIR filter), but crossovers are typically made from analog components, or implemented as their digital equivalent, IIR.

The phase changes by IIR filters will lead to unexpected cancellations when adding filtered and (un-)filtered signals (cf. Comb filter).

In the second order butterworth case ( ):
LPF:  ,
HPF:  .

The sum LPF+HPF is:  , which is known as Notch filter, i.e. the gain at 1 is -∞ dB, because an analog/IIR LPF adds -90° phase shift at frequency 1, and a HPF adds +90° at that frequency.

To prevent the cancellation, either the LPF or the HPF must be negated, i.e. the Butterworth difference HPF-LPF (or LPF-HPF) is taken instead of the sum:
 ; this has the plotted +3dB response.

Linkwitz-Riley filters also use the difference (and not the sum!) in typical IIR/analog implementations (this is mentioned in the article).

Example with Second order LR ( ):
 ,  .
 , i.e. the recombined signal is not exactly the original, but "first order all-pass"-filtered.

--77.11.42.207 (talk) 14:04, 28 May 2015 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Linkwitz–Riley filter. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 12:06, 16 May 2017 (UTC)Reply