Talk:Kelvin–Varley divider

Latest comment: 1 year ago by 81.200.197.164 in topic Error in the circuit diagram
edit

Hello fellow Wikipedians,

I have just modified 5 external links on Kelvin–Varley divider. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 02:09, 4 May 2017 (UTC)Reply

Overstated disadvantage of non-Kelvin–Varley dividers?

edit

Re: "The fundamental disadvantage of this architecture is that resolution of 1 part in 1000 would require 1000 precision resistors.". Isn't that overstating it? Isn't it more like 30 in actual circuits that do not use Kelvin–Varley dividers, 10 resistors per decade (and shorting out if a value is 0)?

Isn't the real issue that those span many orders of magnitude and there are problems at the upper end (thermal noise) and lower end (contact resistance becomes a problem)?

--Mortense (talk) 22:29, 7 June 2017 (UTC)Reply

Error in the circuit diagram

edit

For example, the voltage over resistors 3 and 4 together in the first chain is 0,2 - 0,3V and not 0,2 - 0,4V as shown. All the voltages further up the chain need modifying to match. This also applies to the later stages. 81.200.197.164 (talk) 12:28, 5 January 2023 (UTC)Reply