Talk:EMD SD90MAC

Latest comment: 8 years ago by 173.67.166.188 in topic Indiana Railroad SD90MACs

Indiana Railroad SD90MACs

edit

Just as an aside for this to be edited: The INRD SD90MACs have been sold to Norfolk Southern to be rebuilt in their SD70ACu program. Looking up a link to the article I read a while ago and will edit post accordingly. 173.67.166.188 (talk) 03:23, 26 August 2016 (UTC)Reply

minor text deletion

edit

I deleted the statement ..."although many railfans have complained about the look of the sharp edges on it" in reference to the Phase II cab. I think what railfans think of an engine's looks is superfluous and of no value to the discussion here. Ken (talk) 16:00, 29 September 2008 (UTC)Reply

failure or not?, et al

edit

Ok, I have some problems with the last edit, other than the obvious typographical ones. Unfortunately, I'm not exactly sure where to double-check the information given.

The SD90MAC was a failiure with only 2(technically 3) railroads purchasing it: Canadian Pacific(CP/CP Rail) and Union Pacific(UP). The Southern Pacific(SP/ESPEE) had an order for 3 but with the advent of the UP merger before completion they were delivered in UP colors with the short lived "We Will Deliver" paint scheme.

I'd rather not characterize a locmotive as a success or failure based only on the number of roads that bought them, especially given the number of class 1s left and that the AC6000W, its main competitor, only got 3 roads to my knolwdge.

The Chicago and NorthWestern Railway(CNW) would have purchased some SD80MAC that would have been upgraded to SD90MAC but they were cancelled by UP.A few were temporaraly upgraded to 6000 HP but problems made EMD Shun the 6000 HP program.In the end allof the units should technically be called SD75MAC's.

I have to admit I'm a little confused here. I suspect the editor is confusing the SD80MAC and the SD90/43MAC, but I can't be sure. Problems with the upgrade program should go in the article, but under the SD90/43MAC paragraph, rather than the SD90MAC-H paragraph. As far as calling them SD75MACs, that ignores the tractive effort, fuel capacity, length, and weight, and that statement only refers to the SD90/43MAC locomotives. I guess my first impulse is to just revert the edit, but I'd like to avoid removing some of that information if it's accurate. -- ckape (talk) 03:34, 10 Jan 2005 (UTC)

duplicate comment deleted Ken (talk) 02:55, 19 September 2008 (UTC)Reply

Image added

edit

I caught a SD90/43MAC as the trailing unit of a freight train and snapped a picture, which I've put up. AC units are very rare around these parts. It's far from the best photo, but it's better than nothing until we get one. —Morven 07:04, Feb 23, 2005 (UTC)


I have uploaded a "better" image from my collection but do not know how to place it within article. If anyone knows how and wishes to do so, here is the link to the image: [http://en.wikipedia.org/wiki/Image:EMD_SD90MAC-H.jpg KLWhitehead (talk) 19:58, 7 December 2007 (UTC)Reply

Kewl, thanks I've added the new image to the infobox and placed the older image elsewhere in the article. Occasional image rotation adds character to an article, and keeps things fresh.
--DP67 (talk/contribs) 21:45, 7 December 2007 (UTC)Reply


great, I'm glad it could be of use. I have 1000s of locomotive pics, I'll per checking the other models to see if any might benefit. I do notice that you will need to update the caption. I believe this is the Phase II cab version. KLWhitehead (talk) 03:31, 8 December 2007 (UTC)Reply

The CP pic is pretty useless. While it is a fine pic by itself it isn't of much use here since most of it is hidden by greenery. A broadside, wedgie or otherwise documentary shot would be much more appropriate. Ken (talk) 17:03, 19 April 2013 (UTC)Reply

Co-Co or C-C

edit

Beg to differ, but as the axles are individually powered, shouldn't this be a Co-Co rather than a C-C?

Tabletop 05:51, 30 April 2006 (UTC)Reply


C-C is the North American nomenclature for 3 powered axles on each truck. The European nomenclature would be Co-Co.

KLWhitehead (talk) 19:28, 7 December 2007 (UTC)Reply

more info here: http://en.wikipedia.org/wiki/AAR_wheel_arrangement#C-C Ken (talk) 18:43, 25 September 2008 (UTC)Reply

SD90MAC before AC6000CW

edit

The first AC6000CW was but almost a year (12/1995) before the first SD90MAC-H (8/1996)was built. SD9043MAC's first started showing up in 1994 but, CSX had there first AC6000CW's on order with the inital AC4400CW order in 1993.

Both were a EMD and GE products were a reaction to the Morrison Knudsen MK5000C program.

In order to get a 6000HP prime mover fielded quickly, EMD droped development of there 854H 4 stroke diesel, already almost a decade in development in order to develop the 265H.

This leads me to conclude that the SD90MAC came after the AC6000CW. Chesapeake 21:08, 3 July 2007 (UTC)Reply


perhaps, but the (albeit separate) fact remains that the GE units are still in use (as of June 2008) on a daily basis. Ken (talk) 15:55, 13 June 2008 (UTC)Reply

See also section needs a SERIOUS trimming

edit

Why would anyone click on the AC6000CW link in the "see also" section, when a MAJOR portion of that article can be read right there? It needs to be trimmed to one brief sentence. Wuhwuzdat (talk) 12:07, 21 March 2009 (UTC)Reply

Width and Height

edit

What is width and height of this locomotive? Tabletop (talk) 04:09, 13 January 2012 (UTC)Reply

Changed it back to SD90MAC

edit

SD9043MAC was an informal designation some railroads applied for clarity's sake to identify SD90MAC's fitted with a 4300HP 710 engine. Someone incorrectly changed all references to SD90MAC's to SD9043MAC a few days ago. — Preceding unsigned comment added by 74.79.6.240 (talk) 09:15, 21 February 2012 (UTC)Reply