Talk:Canon EOS flash system

Latest comment: 23 days ago by Okto8 in topic Model specs table needs a complete revamp

An article of its own?

edit
  Resolved

Does this subject really warrant an article of its own? As it stands now, there are similarities between Vibration Reduction and Image stabilization and this article and the parent article TTL/EOS. As far as I know there are corresponding names amongst various manufacturer's, such as Nikon's I-TTL and D-TTL etc. As such it's not really needed to have an article describing every local name branded by various marketing departments. 85.131.27.93 12:01, 11 April 2007 (UTC)Reply

I don't care one way or the other, but as long as nobody objects, why doesn't somebody pull the trigger? Melchoir (talk) 04:03, 18 August 2009 (UTC)Reply

I've gone and merged most of the articles. The new article needs to be re-written but even as it is, it's still better than the previous situation. Jason Quinn (talk) 11:41, 8 October 2010 (UTC)Reply
I will take a crack at rewriting the introduction. IMO the scope needs to be defined (starting with the EX series is simply where the article is at this point) and there needs to be a bit of introduction of the optical and RF triggering that seems so central to this system.
Also the data tables need to be rearranged a bit. I think they're useful, because you can see how the capabilities of the flashes changed over time.
There is some confusion about infrared that I'll try to address. In some cases it's pretty inaccurate to call it IR because it's visible, but at least Canon seems to have a consistent approach to its use so it shouldn't be too hard to describe. AL Virginia (talk) 15:35, 30 January 2023 (UTC)Reply

IR master on 580ex II

edit

Hi all!

The article says that the IR master is supported on the 580ex II. There is also a reference. However following that reference I cannot find the info. Also in the instructions manual there is no "infra" word or piece of word.

Can anybody double check and if necessary correct the info? Thanks, --★ Pikks ★ MsG 15:32, 2 January 2013 (UTC)Reply

Canon does not use the term Infrared. They only use "wireless" to describe their optical flash communication system, which has been shown to work only on the infrared band. Describing it as IR is IMO an acceptable generalization, given that the term is in pretty common use out in the real world. However, I also think the nomenclature in this Wiki should be consistent and not conflicting with Canon's published material. AL Virginia (talk) 12:41, 1 June 2023 (UTC)Reply

Speedlite Transmitter ST-E1

edit

"....It replaced the ST-E1" as far as i know there has never been a ST-E1

85.127.25.204 (talk) 19:34, 2 January 2013 (UTC)Reply

The entire early ranges are omitted

edit

The early SpeedLites were the Canolite (011 and 133A to 299T), then Speedlite E/EG and EZ ranges, and only very recently, the EX range. The EZ430 onward especially were very highly rated. Cites:

FT2 (Talk | email) 14:32, 27 July 2014 (UTC)Reply

The article is about the EOS flash system, so the Canolite series aren't applicable. Okto8 (talk) 19:19, 28 February 2024 (UTC)Reply

Adding missing A-TTL flashes; separate sections by metering type?

edit

I'm adding info on the early EOS Speedlites which are missing from the article, and I wonder if it would be better to categorize the list of models by metering type (and thus era)? At the very least it seems like it makes sense to separate the A-TTL flashes from the E-TTL and E-TTL II flashes. Okto8 (talk) 19:30, 28 February 2024 (UTC)Reply

Model specs table needs a complete revamp

edit

The model specs table is missing all of the A-TTL flashes, and should be set up with models on the Y axis and features on the X axis, both to maintain consistency with other articles and to limit the amount of horizontal scrolling necessary to visually search the table for a particular model. I plan to do this at some point/. Okto8 (talk) 18:15, 20 June 2024 (UTC)Reply