Talk:Biodiesel production/Archive 1

Archive 1

Biodiesel production

This material is a very good start on an article on the production process of biodiesel. Way too detailed for the main biodiesel article, but good to have here. It needs to have the "recipe" components and second person references stripped out and/or moved into How to make Biodiesel. - Taxman 16:51, Jul 2, 2004 (UTC)

I disagree with above comment and, instead, agree with comment preceding main article that: "This article or section is in need of attention from an expert on the subject." I suggest a chemist or chemical engineer (I am one but know nothing about biodiesel) who, for example can write the basic chemical reaction correctly, showing alcohol as a main component of the reaction rather than as a catalyst. Other process steps need better description.

I decided to strip out the purely recipe components and leave them here for now:

Like a recipe for making a cake, a biodiesel recipe specifies quantity of every ingredient required, and the steps for combining and processing them to make biodiesel fuel. The most common recipe uses waste vegetable oil (WVO), alcohol (methanol or ethanol) and sodium hydroxide (caustic soda), to produce biodiesel and glycerol. To produce 1 tonne of biodiesel:
  • One needs 1 t of biolipids (animal or vegetable oil) and 0,1 t of methanol.
  • One receives 0,1 t of glycerol.

Then I need to check the material in Biodiesel recipe and likely delete it since it is a duplicate. - Taxman 00:02, Dec 8, 2004 (UTC)

Wikipedia is not an instruction manual. --Treekids (talk) 00:01, 17 February 2008 (UTC)

Given there are now a number of ways of making biodiesel and in the future there will of course be even more, I went ahead and moved all the transeterification material to Biodiesel Transesterification and made this a stub for an article to cover only the common issues. --Treekids (talk) 00:03, 17 February 2008 (UTC)

This article has been improved substantially over the last year by two ChemE students and me. We're still working to make this page complete and technically correct. BTW, there is no "washing" in alcohol process.--E8 (talk) 02:57, 17 February 2008 (UTC)

Every article can use help, this one is no exception. Completely wiping it to a stub isn't the answer. I would suggest that Treekids discuss this further before dismantling an article. Most people here are pretty reasonable, but undiscussed wholesale changes are not reasonable. PHARMBOY (TALK) 14:34, 17 February 2008 (UTC)

I was too bold; and I do apologize. That said, I did not destroy the content, I moved it to a page with more specificity. Being too bold resulted in some friction but it also resulted in some clarification as to what biodiesel is and what various processes can be used to make it. Thanks all for putting up with the process- it achieved a good result. --Treekids (talk) 20:37, 21 February 2008 (UTC)

Please comment on the revisions I am proposing for Biodiesel production.--E8 (talk) 08:39, 19 February 2008 (UTC) (copied from my talk page --Treekids (talk) 20:37, 21 February 2008 (UTC))

Outstanding issue:

  • If Biodiesel Production is to remain the main article for biodiesel transesterification, then should Biodiesel Transesterification be deleted? I'm certainly not qualified to maintain that content, and it's now redundant. --Treekids (talk) 20:37, 21 February 2008 (UTC)

Inaccuracies

A few bones to pick with the existing article:

  • "Conversion index" - Is this a common term? I would "yield" is more accurate.
  • "Bioalcohol" - the source does not matter. If ethanol from ethylene hydration is so much cheaper than corn alcohol, why use corn alcohol?
  • Lipid - not all lipids are triglycerides. I don't think biodiesel can be easily synthesized from steroids which are lipids as well.
  • "Titration of WVO sample. Optimal pH for Biodiesel is 7 (neutral), the same as distilled water (and most tap water). Some fat has a high level of free fatty acids which require an acid esterification (to obtain an pH lower than 3) before the alkaline transesterification."
Titration - is there any value discussing pH in a mostly-nonaqueous context? Also, can someone explain what/how you acid esterify the FFA before you undergo base transesterification? I would imagine that all you need to do is add an excess of base (first to neutralize the FFA, then to serve as a catalyst) and an alcohol, with perhaps a drying agent to remove the water formed to prevent any hydrolysis.
  • "Mixing the bioalcohol (methanol or ethanol) and catalyst (sodium hydroxide) in exact amounts. This is often incorrectly referred to as methoxide but is not, though methoxide can be used. The key point is that the reaction needs strong alkaline conditions to proceed. A common variant is to use potassium hydroxide."
Why do you need exact amounts if firstly, base is catalytic (a little will help, more won't hurt) and secondly, the alcohol is in excess anyway?
Rifleman 82, I would encourage you to be bold and change the page, as you see fit. It looks like you make some good points. Anything that makes the production of biodiesel more accurate and clear to the reader is needed. Mytwocents 17:02, 30 April 2006 (UTC)


I know the corrections rae not copmlete but I only have that much time. I should be done with the rest in a few days. If anyone cares to help, please feel free. --Rifleman 82 18:50, 30 April 2006 (UTC)
Wow dude, You've really taken the ball and ran with it! I think the page is better for your work, thanks.
Mytwocents 05:06, 1 May 2006 (UTC)

Oil Preparation

Oil preparation Biodiesel processor machines, need the vegetable oil to have some specific properties:

  • Suspended particles lower than 1% (mass/mass) and than 5 micrometres. Because of this, the following are necessary:
    • Filtration to 5 micrometres.
    • Washing with hot water.
    • Decantation.
    • Heating of the oil.
    • Second decantation.
  • Anhydrous (waterless). Because of this, the final step of preparation, after the second decantation is drying.
  • Easy solubility in the alcohol to use.

I'll leave this here until I can find a way to incorporate it into the main article. -- Rifleman 82 17:58, 4 May 2006 (UTC)

Dissertation

As I am pretty much writing a dissertation on this subject, then I shall upload gradually to my user space and then copy it over here - this article is a mess Stui 13:42, 20 March 2007 (UTC)

Biodiesel production equipment merge

Biodiesel production equipment just has a short paragraph and way too many links. --Lijnema 16:29, 21 March 2007 (UTC)

Agreed. We have a company that continues to push it's production methods in this section. They discuss benefits only - no technology; Wikipedia isn't a brochure. Feel free to delete any materials that seem out-of-place. E8 16:01, 28 September 2007 (UTC)

I finally edited out the material that was specific to one manufacturer (and read like a brochure). I also added "Supercritical Process" information from the Biodiesel main page. Numerous other edits made as well. E8 (talk) 19:27, 24 December 2007 (UTC)

Notes on Methoxide

Removed this statement from the main page:

  • User Dieselhead disputes the above statement; the pKa's of water and methanol are 15.7 and 15.5 respectively (source: Evans pKa table <http:/daecr1.harvard.edu/pdf/evans_pKa_table.pdf>); therefore a solution of sodium hydroxide in methanol will be approximately 1:1 NaOH:NaOMe."

This should be discussed and formatted properly before adding it to the main page. I've seen substantial support indicating the contrary (which is currently noted on the main page) and the explanation given by Dieselhead is wholly insufficient in swaying my viewpoint. Dissociation of salts (like the organic salt, methoxide) is different than acid dissociation (polar versus covalent bonds). E8 09:19, 27 July 2007 (UTC)

It should be noted that methoxide is produced by this reaction. Methoxide is necessary intermediate in transesterfacation reactions. The main page mentions that the equilibrium constant is way to the left, which is true, but that doesn't mean methoxide is non-existent. Instead, methoxide will only form in very small quantities and more methoxide will not form until the previous methoxide has been reacted with the ester. Any more methoxide that is formed will shift the equilibrium and cause another methoxide molecule to revert to methanol. The Base catalysed mechanism section is misleading and should be changed. TheFatMonkey (talk) 04:28, 10 December 2007 (UTC)

Equilibrium and mechanism

I found a source ("Biodiesel from Rapeseed Oil, Methanol and KOH 2. Composition of Solution of KOH in Methanol as Reaction Partner of Oil" by Komers et. al. that directly contradicts the claim that the methanol-methoxide equilibrium is highly unfavorable; this work cites a value of K of about 0.12, which increases hyperbolically depending on the ratio of the inititial concentrations of methanol and KOH. Anyone care to confirm this? 68.118.192.197 (talk) 00:04, 26 November 2007 (UTC)

  • An equilibrium constant (K) of 0.12 indicates the reactants (Methanol and KOH), NOT products, are strongly favored. Please post a link to the article (or e-mail me a copy) as I've been unable to attain a complete copy on-line. E8 (talk) 01:34, 26 November 2007 (UTC)
  • I intended that it wasn't as favored as the article indicates, though indeed the reactants are still favored. I will email you the article since it doesn't appear to be freely available. 68.118.192.197 (talk) 21:55, 26 November 2007 (UTC)
  • According to the wiki software you have not specified an email address; I am pretty sure I have so you can email me if you want and I'll send you the article; or just let me know if you specify one. Mattb112885 (talk) 21:57, 26 November 2007 (UTC)
  • Matt, I couldn't find your e-mail address. This system is a bit cumbersome at times. I did, however, make it possible for Wikipedians to send me e-mail. E8 (talk) 23:48, 26 November 2007 (UTC)
  • Monkey, would you like a copy of the paper Matt sent me? We were working on an appropriate fix for this section, but I've been busy writing finals, and this project isn't something I can complete soon. E-mail me if you want a copy and are willing to work on making this section more accurate. Thanks for helping! E8 (talk) 04:37, 10 December 2007 (UTC)
  • I've removed the unsourced information from the main page. The source Mattb112885 provided offers experimental evidence that indicates a vastly different value, but I'd like a better chemist/chemical engineer to look the paper over and write up the conclusions.--E8 (talk) 20:30, 24 February 2008 (UTC)
Good for removing the "A word on..." section. I know people mean well, but this stuff has to be sourced and not editorialized within the article. PHARMBOY (TALK) 21:05, 24 February 2008 (UTC)

Sykes's A Guidebook to Mechanism in Organic Chemistry, 6th Edition, states that the transesterification mechanism is BAC2 (Based-catalyzed, acyl-oxygen cleavage, bimolecular). Source page #239.--E8 (talk) 14:33, 24 September 2008 (UTC)

Methods of production

Only one of the listed methods generates Biodiesel to the production standards; the other processes can produce biologically-derived fuels similar to Biodiesel, but they are alkanes, not Methyl Esters. There are substantial chemical and process differences.--E8 (talk) 03:59, 17 February 2008 (UTC)

Page revision

I has become abundantly apparent that this page is in need of serious revision / clean up. I'm beginning editing my sandbox. Feel free to constructively comment or critique.--E8 (talk) 06:11, 19 February 2008 (UTC)

Workup

This section needs sources, needs to be retitled, and needs cleanup for readability. I appears just to be a block of ideas that didn't fit in other sections. What would be an appropriate title for this section? I removed the information on emulsions, as it's more "how-to" than encyclopedic content (and it's been uncited for over a year).--E8 (talk) 18:00, 25 March 2008 (UTC)

  • The information is, however, accurate, as it is the final step in biodiesel production. It isn't a how to because it doesn't explain "how to" do the steps, only that the steps exist in the production, and Biodiesel production is the exact title of the article. It is the final step, so having it at the end seems appropriate, so placement isn't an issue. The subtitle is weak, as is the language, but the overall content is accurate. I changed to "final process" and added single line that glycerine is produced and sinks to bottom of mix. That fact needs to be present. PHARMBOY (TALK) 18:46, 25 March 2008 (UTC)
  • Thanks for explaining, Pharmboy. I see how the content fits in now. I'm still working on an overhaul of this page, as it's still in need of substantial work. I'm hoping to recruit some help as its the busy time of year for us.--E8 (talk) 22:54, 25 March 2008 (UTC)

Mcgyan process

Is this a big deal, a small deal, or just snake oil? It sounds good — broader range of inputs; faster, cheaper processing; little waste.

—WWoods (talk) 02:11, 26 August 2008 (UTC)

In my opinion, this is a big deal. I had information posted on this when it was a new development in the "News" section, but have since removed it. There are other similar, competing developments as well, so this isn't the only fixed-bed-catalyst/supercritical hybrid system. There are lots of interesting designs.--E8 (talk) 04:03, 26 August 2008 (UTC)

Talk page archiving

There are comments here that are quite old and no longer applicable; this should make the page more readable and allow editors to more-easily see and address current issues. I will archive older content on this page, assuming consensus.--E8 (talk) 20:54, 25 June 2009 (UTC)

Reactions section

The reactions section should be altered to mention esterification, in addition to transesterification. There should be mention of the different catalysts used, as well as catalyst-free methods (e.g. supercritical production).--E8 (talk) 20:58, 25 June 2009 (UTC)

You mean to distinguish the transesterification of a glyceride to a simple ester with the esterification of free acids? —Preceding unsigned comment added by 68.6.76.141 (talk) 21:35, 11 May 2010 (UTC)

Image

Please include

File:Biodiesel production.png
this image

to the article.

Thanks, KVDP (talk) 18:01, 14 May 2010 (UTC)

This image was previously removed from this page and you have corrected none of the issues that led to the removal. I'm sure the image you made was well-intended, but the instructions provided are both superficial and dangerous. It neither adds depth, nor clarification to the article, and in light of the hazards associated with the process, does not belong on Wikipedia. If you were to correct the suggested steps that are dangerous and add the numerous missing steps. This page provides complete instructions, whereas the sources you cite for the image creation are not reliable or do not share the same steps. Violates WP:NOR, as there is clearly some synthesis (combining information from multiple sources is synthesis). --E8 (talk) 18:18, 14 May 2010 (UTC)

Here is a list of technical/safety issues with the diagram that should be corrected:
  • There is no mention or demonstration of the purification step.
  • The middle step in shown (three buckets) is unclear, and the order shown does not make sense. Heating should be done first, followed by addition of chemicals, mixing, settling/decanting, and finally, purification.
  • The formation of methoxide is not mentioned, and it's addition to the oil is not clear in the steps.
  • Open flame should not be used, so the flame icon should be replaced (as deserving of Darwin Award as this is in action, it has been done).
  • The spoon icon should be replaced, if at all possible.
  • The term "stirring" should be replaced with "mixing" or "homogenization." Simple stirring will lead to an incomplete reaction.
  • The term "siphoning" should definitely be removed; "decant" is a better choice (this is an American-English connotation issue).
  • There is no mention of feedstock testing, nor pretreatment steps (i.e., titrating, acid-esterification, etc.)
--E8 (talk) 17:53, 16 May 2010 (UTC)

A more complete set of steps, such as shown here: http://www.utahbiodieselsupply.com/images/MakingBiodiesel2.gif would be useful. Misappropriate use of household utensil icons (i.e. spoons, blenders, egg beaters, etc.) should be avoided, if possible.--E8 (talk) 18:51, 14 May 2010 (UTC)

OK; I'll post a request at the graphics lab; for now can you remove the deletion template ? Replace it with a NPOV, ... template so we have a bit more time to correct the issues.

KVDP (talk) 11:45, 28 May 2010 (UTC)

It's been over four months and this image still hasn't been corrected. The deletion proposal will be reposted. Page editors, please vote on this proposal.--E8 (talk) 01:56, 9 October 2010 (UTC)

Feedstock pretreatment section

This section needs to address pretreatment to virgin oils (both pressed and chemically extracted varieties). Gums and phospholipids should be mentioned.--E8 (talk) 21:02, 25 June 2009 (UTC)

Economizing biodiesel production

The growing global attention toward renewable energy sources including biodiesel and depletion of fusel fuels reserves are both strong driving forces to look for modern approaches to economize biofuels production. Biodiesel is currently of great importance among biofuels owing to its unique characteristics. Therefore, striving to reduce the biodiesel production costs using upstream and downstream approaches is a necessity. In a recent effort, Hasheminejad et al (2010) investigated various strategies to economize biodiesel production.[1]

As known, the homogeneous and heterogeneous catalyzed systems as well as supercritical fluid method (SCM) are the main methods of biodiesel production. Comparatively, SCM is the least economical method. Although the yield of conversion by homogeneous process is high, the limitation on using various raw materials (refined oil) is considered as its main drawback. In fact, when high FFA content oils are used, a large amount of water in the washing step is required which increases the biodiesel production cost. So, it can be concluded that the heterogeneous process is the most desirable method due to the wide range of raw material used including high FFA content oils, less amount of equipment involved in the process and high purity of glycerin produced by this method. On the whole, developing upstream and downstream strategies to economize biodiesel production is a necessity. Upstream strategies such as using waste cooking oil (WCO) and wastes from animal or vegetable oil, using non edible plant oils, genetic engineering of oil crops and using membrane separation technology (MST)-equipped reactors for biodiesel production can be implemented to successfully lower the biodiesel production cost. In case of using WCO, the problem involved due to the presence of water and subsequent yield reduction could be overcome by using hydrophobic solid acid catalysts. Moreover, shifting toward non edible plant oils and their genetic engineering are two other important strategies for reducing the cost imposed by the required raw materials. Downstream strategies such as ultra purification of the glycerin produced in biodiesel production processes, using crude biodiesel glycerin as an energy supplement for ruminants and applying MST for biodiesel separation and purification could be key factors to further economize biodiesel production. Ultimately, if optimum process efficiency and economization are to be fully achieved, then future developments of the mentioned strategies are inevitable. These in combination can play an important role in the development of biodiesel production industry in future.

This content was moved from Biodiesel, as it is most appropriate on this page. It would be helpful to define the technical terms in the summary shown (and wikify whatever possible), or rewrite the summary so that it corresponds with other content. This page may need to be expanded to provide clarification. It would be helpful if other editors could comment on/make edits to this, and if there are no objections (there were on Biodiesel), post this section.--E8 (talk) 16:30, 8 October 2010 (UTC)

  • Following up, I attempted to find the source article so I could make additions/corrections to this content. The article is for sale at a high cost, so if someone has a copy to forward, I would like to be able to use it to make edits. The content above looks to be, at least in part, copied verbatim from the cited material (See the Upstream and Downstream preview in this Google search for the first sentence of this content, and note the exact same sentence is used, with the exact same error (both use the term "fusel," where "fossil" should be used.) Even with attribution, copied content isn't permitted.--E8 (talk) 20:44, 22 November 2010 (UTC)

Sustainability (Too Technical)

I think this article is too long and too technical. For instance I was unable to deduce how much raw material is needed to make one litre of the finished product. I know rapeseed is great for producing biodiesel. A 1000^2 meter field of rapeseed produce about 400 kg oil seeds, of which about 40% is oil suitable for biodiesel, according to the Norwegian Wikipedia page. However, it doesn't say how many litres you get of the finished product. This is crucial information to determine if the production of biodiesel is sustainable. If these simple facts were available, people would be better suited to make their own calculation based on the facts, and thus make up their own minds about whether production of Biodiesel is sustainable or not. --Kebman (talk) 18:37, 5 January 2011 (UTC)