The Subaru Sambar is a cabover truck and microvan manufactured and marketed by Subaru as Japan's second truck compliant with the country's strict Keitora (軽トラ) or Kei vehicle tax class, after the Kurogane Baby. Introduced in 1961 in microvan and Kei pickup configurations, the Sambar remains in production, now in its eighth generation — beginning with the sixth generation as a rebadged Daihatsu Hijet.[1]

Subaru Sambar
Overview
ManufacturerSubaru (Fuji Heavy Industries, 1961–2012)
Daihatsu (2012–present)
Also calledSubaru Dias Wagon
Daihatsu Hijet/Atrai (2012–present)
Toyota Pixis Van/Truck (2012–present)
Production1961–present
AssemblyJapan: Otakita Plant, Ōta, Gunma Prefecture
Body and chassis
ClassKei truck
Microvan

Since its introduction, the Sambar has used a rear engine, rear wheel drive layout with body-on-frame rather than unibody construction. The first two generations used the air-cooled engine from the Subaru 360 and later generations used the water-cooled engine from the Subaru Rex, Vivio and the Pleo. Four-wheel drive became optional in 1980. Sambar models were manufactured in China as the [三八] as well as in Finland in a joint venture with Elcat Automotive. Passenger variants of the Sambar were later marketed as the Subaru Dias Wagon.

With the Sambar, named after a species of deer, Subaru may have borrowed from the Type 2 (1951–1967) van — using a marketing name very similar to the Volkswagen's upper trim level, the Samba, and using a similar rear-drive, rear air-cooled engine, cabover configuration. The Sambar was the second Kei truck (after the Kurogane) and was the last Kei-compliant vehicle to use a rear-engine, rear-drive layout.[1]

First generation (1961–1966)

edit
Subaru Sambar (first generation)
 
The first generation (1961–1966)
Overview
ManufacturerSubaru
Production1961–1966
DesignerShinroku Momose
Body and chassis
ClassKei truck
LayoutRR layout
RelatedSubaru 360
Powertrain
Engine356 cc EK31 two-stroke I2
Transmission3-speed Manual transmission
Dimensions
Wheelbase1,670 mm (65.7 in)
Length2,990 mm (117.7 in)
Width1,300 mm (51.2 in)
Height1,520 mm (59.8 in)
Curb weight470 kg (1,040 lb) (Van)
395 kg (871 lb) (Pickup truck)

Introduced at the 1960 Tokyo Motor Show in passenger and commercial versions, the Sambar featured 4-wheel independent suspension, a rear engine, rear drive layout — and a one-box body configuration based on the Subaru 360 platform and inspired by the 1957 Fiat 600 Multipla. The chassis uses a ladder frame construction, with a rear torsion bar trailing arm suspension. The reverse gearshift position was a left-pattern selection, instead of a right-pattern selection, and the EK series engine could be accessed via a hatch inside the vehicle. Maximum power from the two-stroke twin was 18 PS (13.2 kW; 17.8 bhp). As with the Subaru 360, front doors were rear-hinged. Rear doors were front-hinged, with a rear cargo hatch. Provisional camping bunk beds were available.

Commercial variants of the Sambar was marketed for delivery use, nicknamed the "kuchibiru ([lower] lip)" Sambar, inspired by a competior, the 1959–1961 Kurogane Baby. Other competitors included the front-engined Suzulight Carry which placed the engine in front of the driver, but also adopted the cabover approach in 1966, and the 1964 Daihatsu Hijet cabover.[2]

The Subaru cabover configuration followed the 1950 Volkswagen Type 2, and was introduced the same year as the 1961 Ford Econoline, and the 1961 Chevrolet Greenbrier.

Second generation (1966–1973)

edit
Subaru Sambar (second generation)
 
Second generation, pre-facelift (1966–1973)
Overview
ManufacturerSubaru
Production1966–1973
Body and chassis
ClassKei truck
LayoutRR layout
RelatedSubaru 360
Subaru R-2
Powertrain
Engine
Transmission3/4-speed manual
Dimensions
Wheelbase1,750 mm (68.9 in)
Length2,995 mm (117.9 in)
Width1,295 mm (51.0 in)
Height1,535–1,545 mm (60.4–60.8 in)
Curb weight535 kg (1,179 lb) (Van)
465 kg (1,025 lb) (Pickup truck)
 
The rear-view of a second generation truck

The redesigned Sambar debuted in January 1966 with revised styling and a truck variant. The second generation is nicknamed the "baban" Sambar.

The Sambar continued to use the 356 cc EK31 engine, but now in the 20 PS (14.7 kW; 19.7 hp) iteration used in the Subaru 360 since July 1964.[3]

 
1970 Subaru Sambar mid-model change

A raised roof for extended headroom was added to the options list in 1968. Starting with the 1970 model year, the engine was accessed from outside the vehicle, and the front doors were conventionally hinged. To enhance safety a full padded dash pad was introduced, sharing the dashboard panel from the new R–2. Along with the facelift, the engine was also updated (EK33) and now produced 26 PS (19.1 kW; 25.6 hp).

The styling was also revised, adding a faux front grille to create a more modern appearance as well as bringing the corporate look of the all new compact Subaru Leone.

The Sambar saw new competitors, the Mazda Porter in 1968, and the Honda Vamos in 1970.

Third generation (1973–1982)

edit
Subaru Sambar (third generation)
 
1981 Subaru 600 (export version)
Overview
ManufacturerSubaru
Also calledSubaru 500/600
Jet Electravan (USA)
Sanfu Xiaobawang (Taiwan)
Production1973–1982
AssemblyTaicheng, Taiwan (Sanfu Motors)
Body and chassis
ClassKei truck
LayoutRR layout
RelatedSubaru Rex
Powertrain
Engine
Transmission4-speed manual
Dimensions
Wheelbase1,805–1,820 mm (71.1–71.7 in)
Length3,195 mm (125.8 in)
Width1,395 mm (54.9 in)
Height1,850–1,885 mm (72.8–74.2 in)
 
Subaru Sambar 360 truck

The third generation appeared 10 February 1973, this one nicknamed the "Gōriki (Herculean strength)" Sambar due to an advertising campaign at the time. The first series still carried a two-stroke two-cylinder 356 cc engine but by now water-cooled. Maximum power is 28 PS (21 kW) at 5500 rpm. The engine code was EK34, the truck received the K71 model code while the van was called K81.

As of February 1976, the engine was upgraded to the EK21 four-stroke water-cooled version introduced in the Rex to reduce emissions. Claimed maximum power remained the same, but at a much higher engine speed (7500 rpm) and with considerably lower torque figures than the earlier two-stroke type. This model saw the introduction of an electric window washer pump to improve driver visibility. Because of regulations changes, only three months later the engine was again upgraded with a 490 cc displacement (EK22) engine of a similar layout for the Sambar 5 (K75 truck, K76 panel van, K85 van). This was naturally sold as the Subaru 500 in export markets.[4] This was in turn soon replaced by a full 550 cc (EK23) model, the K77/87 of March 1977. In export, the Sambar 550 was known as the Subaru 600.

This model saw the introduction of a sliding side door added on both sides (although a version without the driver's side door remained available), with a full "B" pillar to enhance body stiffness instead of the approach used by the Nissan Prairie which had the front and rear doors interlock. Minor horsepower improvements were introduced in 1977 along with an increase in the width of the vehicle. A sunroof was added to the options list in 1979. 4WD was introduced as an option in 1980, on both the van and truck bodystyles, coinciding with the same feature being offered on the Subaru Rex.

 
Sanfu model in Taiwan

Fourth generation (1982–1990)

edit
Subaru Sambar (fourth generation)
 
Subaru Sambar Try TG (early model)
Overview
ManufacturerSubaru
Also calledSubaru 700
Production1982–1990
Body and chassis
ClassKei truck
LayoutRR layout
RelatedSubaru Domingo
Powertrain
Engine
Transmission4/5-speed manual
Dimensions
Wheelbase1,805 mm (71.1 in)
Length3,195 mm (125.8 in)
Width1,395 mm (54.9 in)
Height1,650–1,900 mm (65.0–74.8 in)
 
Subaru Sambar truck

May 9, 1982 is when the fourth generation model appeared (KR), with one-box van models marketed as "Sambar Try." The Try was available as a Van with a high or a regular roof, and as a high-roofed passenger model (model code KR). The suspension was upgraded to a four-wheel independent layout with MacPherson struts for the front wheels. The wheel size increased from 10 inches to 12 inches, thereby accommodating larger drum brakes used at all four wheels. The 4WD was available with a dual-range transmission. An automatic clutch was offered in the Sambar Try FL and FX.

While the home market Sambar came equipped with the 544 cc, 2-cylinder 28 PS (21 kW) EK23 engine, export versions (known as Subaru 700) received an enlarged 665 cc version of the same, producing 31 PS (23 kW) and 52 N⋅m (38 lb⋅ft) at 3,500 rpm.[5] LHD versions were available and the 700 was also offered with four-wheel drive.[5]

In May 1986 retracting seat belts became standard fitment and the TG version of the Sambar Try replaced the earlier TX-G. January 9, 1987 saw the commercial one-box versions renamed Sambar Van, while the high roofed passenger version retained the Sambar Try name. Front disc brakes were added to the options list. Full-time 4WD was available towards the end of this generations product cycle. In April 1989, a six-valve engine producing 34 PS (25 kW; 34 bhp) joined the regular engine in high-end versions of the Try and the Sambar truck. The EN05 four-cylinder engine later used in the Rex was never fitted to the KR/KT Sambar, as it would require re-engineering to be a replacement platform. The enlarged Domingo was available with the 3-cylinder EF10 1000 cc engine starting in 1983.

This bigger version of the Sambar was available in Europe from 1983 and went by several names, such as the Subaru Sumo, Libero, Domingo, and Columbuss. The small-bodied version went by the name of Subaru 700 in the few markets where it was available. It went on sale in the United Kingdom in August 1985, in Van form only and with either rear- or four-wheel drive.[5] Subaru's plans involved selling only about 500 examples per year, divided evenly between the drivetrain types.[5]

The primary difference between the Sambar and the larger-engined variants is the extension of both the front and rear bumpers to aid in occupant protection. The larger Domingo (and its various iterations) isn't considered "kei class" because the dimensions exceed the requirements and the engine displacement is larger than regulations allow.

Fifth generation (1990–1999)

edit
Subaru Sambar (fifth generation)
 
Subaru Sambar Dias II
Overview
ManufacturerSubaru
Production1990–1999
Body and chassis
ClassKei truck
LayoutRR layout or Rear engine 4wd
Related
Powertrain
Engine
Transmission
Dimensions
Wheelbase1,885 mm (74.2 in)
Length3,295 mm (129.7 in)
Width1,395 mm (54.9 in)
Height1,760–1,895 mm (69.3–74.6 in)
Curb weight680–990 kg (1,499.1–2,182.6 lb)

The fifth generation Sambar was introduced in 1990. Engine regulations for displacement size were increased and the Sambar's engine was upgraded to 660 cc. For the 4WD version it sold as Subaru Dias Wagon as a permanent trim model. Commercials in Japan used Kuniko Yamada, a Japanese comedian.

The tradition of using the engine in Subaru's kei car offering was continued, with the Subaru Vivio sharing its EN07 engine with this version of the Sambar. The engine now had four cylinders and 40 PS (29 kW) in the carburetted standard model; 55 PS (40 kW) was on tap in the optional supercharged model, coupled with fuel injection. An automatic transmission was offered in the form of Subaru's ECVT system in tandem with full-time 4WD and a viscous coupling differential.

1994 saw a full model change for the Domingo, using the new Sambar design coupled to the Subaru Justy's EF12 SOHC three-cylinder engine displacing 1200 cc. A maximum seating capacity of seven was possible. October 1995 saw the elimination of the ECVT transmission due to drivability issues and a 3-speed automatic was made available instead. A new option for naturally aspirated versions was the EMPi engine, producing 46 PS (34 kW).

Special edition appearance packages were offered including a retro "Dias Classic", later available on the Sambar truck, influenced by the Subaru Vivio Bistro. A Sambar Dias Classic appears in Love Hina as Seta's van.

Sixth generation (1999–2012)

edit
Subaru Sambar (sixth generation)
 
2001 Subaru Sambar van
Overview
ManufacturerSubaru
Also calledSubaru Dias Wagon (passenger van variant)
Production1999–2012
1999–2009 (Subaru Dias Wagon)
Body and chassis
ClassKei truck
LayoutRR layout
RelatedSubaru Pleo
Powertrain
Transmission5-speed manual
3-speed automatic
Dimensions
Wheelbase1,885 mm (74.2 in)
Length3,395 mm (133.7 in)
Width1,475 mm (58.1 in)
Height1,815–1,905 mm (71.5–75.0 in)
Curb weight730–1,010 kg (1,609.4–2,226.7 lb)
 
Subaru Sambar truck
 
Dias Wagon

The sixth generation was available for purchase May 2, 1999, and in 1998 kei class vehicle size regulations allowed for an increase in body size. The 4WD Dias is now only offered with a 3-speed automatic transmission, with the supercharger optioned engine power output increased to 58 PS (57 bhp). Carburetors are no longer used on the current version of the Subaru EN engine for the entire product line, and the EF engine is no longer manufactured.

To address safety concerns with side impact resistance, on 1 October 1998 the width restriction for kei vehicles was increased to 1,480 mm (58.3 in) and the sixth generation Sambar was widened accordingly.

July 18, 2008, items that were included were dual front passenger airbags, power sliding rear doors, power windows, and leather interior on upper trim level models.

Seventh generation (2009–2014)

edit

On June 26, 2007, an article appeared in the Japanese newspaper Nikkan Kogyo Shimbun, claiming that due to the investment by Toyota in Fuji Heavy Industries, the parent company of Subaru, all production of kei class vehicles made by Subaru would end and be replaced by Toyota-owned Daihatsu models rebadged as Subarus[citation needed]. This would allow Subaru to focus on their core business of four-wheel-drive family cars with horizontally opposed engines; kei car sales are almost entirely limited to the domestic Japanese market and were not cost effective for such a small manufacturer.[1]

In September 2009, the passenger version of the Sambar introduced as the Subaru Dias Wagon, a rebadged version of the Daihatsu Atrai van. The seventh generation of the Sambar truck was later introduced to Japan on April 2, 2012 as a badge engineered Daihatsu Hijet Van/Truck, but the passenger variant (Dias Wagon) had already been produced since 2009. This is the first time the Sambar is a semi-cabover vehicle, the engine was installed in the front of the vehicle, between the front passengers, and driven by the rear wheels, and continuing to offer on demand four-wheel-drive. In 2014, the Sambar truck was discontinued and updated to S500 Hijet generation, while the Sambar van/Dias Wagon stayed on the S321 platform.

Eighth generation (2014–present)

edit

The eighth-generation Sambar Truck was introduced in Japan on September 2, 2014 as a rebadged tenth-generation Daihatsu Hijet Truck.

The eighth-generation Sambar Van was introduced in Japan in January 2022 as a rebadged eleventh-generation Daihatsu Hijet Cargo, which is built on the DNGA platform. The Dias Wagon passenger van was renamed to Sambar Dias.

edit

References

edit
  1. ^ a b c "生産終了寸前スバル「サンバー」人気高まる 限定車いずれも完売、注文も増える" [Subaru Sambar increases in popularity on the verge of discontinuation]. J-CAST (in Japanese). 2011-08-29. Archived from the original on 2019-05-27.
  2. ^ 360cc: Nippon 軽自動車 Memorial 1950-1975. Tokyo: Yaesu Publishing. 2007. p. 96. ISBN 978-4-86144-083-0.
  3. ^ 360cc: Nippon 軽自動車 Memorial, p. 95
  4. ^ Subaru Pick Up 500 (advertisement) (in Indonesian), Jakarta, Indonesia: P.T. Insan Apollo, 1976
  5. ^ a b c d Weatherley, Brian (1985-08-03). "Subaru's Micro Van". Commercial Motor. Vol. 162, no. 4132. p. 21. Archived from the original on 2024-05-02.
edit