This article needs additional citations for verification. (January 2009) |
In telecommunications, spectral width is the width of a spectral band, i.e., the range of wavelengths or frequencies over which the magnitude of all spectral components is significant, i.e., equal to or greater than a specified fraction of the largest magnitude.
In optical communications applications, the usual method of specifying spectral width is the full width at half maximum (FWHM). This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most −3 dB).
The FWHM method may be difficult to apply when the spectrum has a complex shape. Another method of specifying spectral width is a special case of root-mean-square deviation where the independent variable is wavelength, λ, and f (λ) is a suitable radiometric quantity.
The relative spectral width, Δλ/λ, is frequently used where Δλ is obtained according to note 1, and λ is the center wavelength.
See also
editReferences
edit- This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).