Socket 479 (mPGA479M) is a CPU socket used by some Intel microprocessors. It is the socket used by the Pentium M and Celeron M mobile processors normally used in laptops,[1] but has also been used with Tualatin-M Pentium III processors. The official naming by Intel is μFCPGA and μPGA479M.

Socket 479
TypePGA-ZIF
Chip form factorsFlip-chip pin grid array (FC-PGA2)
Contacts479 on the socket, 478 or 479 pins on the processor, 478 contacts used
FSB protocolAGTL+
FSB frequency400 MT/s, 533 MT/s
ProcessorsIntel Pentium M
Intel Celeron M
VIA C7-M
PredecessorSocket 495
SuccessorSocket M

This article is part of the CPU socket series

There exist multiple electrically incompatible, but mechanically compatible processor families that are available in PGA packages using this socket or variants thereof:[1]

Even the Intel's CPU specifications seem to be not clear enough on the distinction and instead use the package/socket designations PGA478 or PPGA478 for more than 1 of the above sockets.[2][3]

Perhaps adding yet more confusion, some of the PGA-based CPUs above are also available in a BGA (or more precisely, μBGA or even μFCBGA) package which has all of the 479 contacts (balls) populated. For these CPU variants, the Intel's CPU specifications use the designations BGA479,[2] PBGA479[3] or H-PBGA479.[4] It should be however pointed out that these designations denote rather the CPU package itself and not the socket, which the BGA variants do not use at all (they are intended to be directly soldered to the mainboard, e.g. in an embedded system). The non-BGA counterparts of these CPUs use any one of the above mentioned sockets, not only the Socket 479.

Technical specifications

edit
 
An Asus CT-479 adapter
 
CT-479 installed on ASUS P4GPL-X motherboard

Socket 479 has 479 pin holes. Pentium M processors in PGA package have 479 pins that plug into this zero insertion force socket. Only 478 pins are electrically connected (B2 is reserved and "depopulated on the Micro-FCPGA package").[5]

Although electrically and mechanically similar, Socket 478 has one pin fewer, making it impossible to use a Pentium M processor in a 478 board. For this reason manufacturers like Asus have made drop-in boards (e.g. CT-479) which allow use of Socket 479 processors.[6]

Chipsets which employ this socket for the Pentium M are the Intel 855GM/GME/PM, the Intel 915GM/GMS/PM and the VIA family of chipsets such as the VN800. While the Intel 855GME chipset supports all Pentium M CPU's, the Intel 855GM chipset does not officially support 90 nm 2MB L2 cache (Dothan core) models (even though it works, it only works at 400FSB, some 3rd party/user was able to overclock the FSB on 855GM/GME/PM to support 533FSB Dothan Core).[7] The other difference is the 855GM chipset graphics core runs at 200 MHz while the 855GME runs at 250 MHz.

In 2006, Intel released the successor to Socket 479 with a revised pinout for its Core processor, called Socket M. This socket has the placement of one pin changed from the Pentium M version of Socket 479; Socket M processors will physically fit into a Socket 479, but are electrically incompatible with most versions of the socket479(except using ATI north bridge RC415MD)[unreliable source?] . Socket M supports a 667 MT/s FSB with the Intel 945PM/945GM chipsets.

See also

edit

References

edit
  1. ^ a b Socket 479 (μPGA479M), CPU-World, retrieved 2009-01-07
  2. ^ a b Intel Core 2 Duo Processor T9900 Specifications, Intel, retrieved 2016-07-13
  3. ^ a b Intel Celeron M Processor 440 Specifications, Intel, retrieved 2016-07-13
  4. ^ Intel Pentium M Processor 750 Specifications, Intel, retrieved 2016-07-13
  5. ^ Intel Pentium M Processor Datasheet (PDF)
  6. ^ ASUS CPU Adaptor Brings Quiet and Cool Performance of Notebook Processor to Desktop Computing
  7. ^ Intel 855GM/855GME Chipset Platform Design Guide (PDF)