In materials science, slip is the large displacement of one part of a crystal relative to another part along crystallographic planes and directions.[1] Slip occurs by the passage of dislocations on close/packed planes, which are planes containing the greatest number of atoms per area and in close-packed directions (most atoms per length). Close-packed planes are known as slip or glide planes. A slip system describes the set of symmetrically identical slip planes and associated family of slip directions for which dislocation motion can easily occur and lead to plastic deformation. The magnitude and direction of slip are represented by the Burgers vector, b.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/Slip_system.gif/220px-Slip_system.gif)
An external force makes parts of the crystal lattice glide along each other, changing the material's geometry. A critical resolved shear stress is required to initiate a slip.[2]
Slip systems
editFace centered cubic crystals
editSlip in face centered cubic (fcc) crystals occurs along the close packed plane. Specifically, the slip plane is of type {111}, and the direction is of type <110>. In the diagram on the right, the specific plane and direction are (111) and [110], respectively.
Given the permutations of the slip plane types and direction types, fcc crystals have 12 slip systems.[3] In the fcc lattice, the norm of the Burgers vector, b, can be calculated using the following equation:[4]
Where a is the lattice constant of the unit cell.
Body centered cubic crystals
editSlip in body-centered cubic (bcc) crystals occurs along the plane of shortest Burgers vector as well; however, unlike fcc, there are no truly close-packed planes in the bcc crystal structure. Thus, a slip system in bcc requires heat to activate.
Some bcc materials (e.g. α-Fe) can contain up to 48 slip systems. There are six slip planes of type {110}, each with two <111> directions (12 systems). There are 24 {123} and 12 {112} planes each with one <111> direction (36 systems, for a total of 48). Although the number of possible slip systems is much higher in bcc crystals than fcc crystals, the ductility is not necessarily higher due to increased lattice friction stresses.[3] While the {123} and {112} planes are not exactly identical in activation energy to {110}, they are so close in energy that for all intents and purposes they can be treated as identical. In the diagram on the right the specific slip plane and direction are (110) and [111], respectively.[4]
Hexagonal close packed crystals
editSlip in hexagonal close packed (hcp) metals is much more limited than in bcc and fcc crystal structures. Usually, hcp crystal structures allow slip on the densely packed basal {0001} planes along the <1120> directions. The activation of other slip planes depends on various parameters, e.g. the c/a ratio. Since there are only 2 independent slip systems on the basal planes, for arbitrary plastic deformation additional slip or twin systems needs to be activated. This typically requires a much higher resolved shear stress and can result in the brittle behavior of some hcp polycrystals. However, other hcp materials such as pure titanium show large amounts of ductility.[6]
Cadmium, zinc, magnesium, titanium, and beryllium have a slip plane at {0001} and a slip direction of <1120>. This creates a total of three slip systems, depending on orientation. Other combinations are also possible.[7]
There are two types of dislocations in crystals that can induce slip - edge dislocations and screw dislocations. Edge dislocations have the direction of the Burgers vector perpendicular to the dislocation line, while screw dislocations have the direction of the Burgers vector parallel to the dislocation line. The type of dislocations generated largely depends on the direction of the applied stress, temperature, and other factors. Screw dislocations can easily cross slip from one plane to another if the other slip plane contains the direction of the Burgers vector.[2]
Slip band
editFormation of slip bands indicates a concentrated unidirectional slip on certain planes causing a stress concentration. Typically, slip bands induce surface steps (i.e. roughness due persistent slip bands during fatigue) and a stress concentration which can be a crack nucleation site. Slip bands extend until impinged by a boundary, and the generated stress from dislocation pile-up against that boundary will either stop or transmit the operating slip.[9][10]
Formation of slip bands under cyclic conditions is addressed as persistent slip bands (PSBs) where formation under monotonic condition is addressed as dislocation planar arrays (or simply slip-bands).[11] Slip-bands can be simply viewed as boundary sliding due to dislocation glide that lacks (the complexity of ) PSBs high plastic deformation localisation manifested by tongue- and ribbon-like extrusion. And, where PSBs normally studied with (effective) Burger’s vector aligned with extrusion plane because PSB extends across the grain and exacerbate during fatigue;[12] monotonic slip-band has a Burger’s vector for propagation and another for plane extrusions both controlled by the conditions at the tip.
Identification of slip activity
editThe main methods to identify the active slip system involve either slip trace analysis of single crystals[13][14] or polycrystals,[15][8] using diffraction techniques such as neutron diffraction[16] and high angular resolution electron backscatter diffraction elastic strain analysis,[17] or Transmission electron microscopy diffraction imaging of dislocations.[18]
In slip trace analysis, only the slip plane is measured, and the slip direction is inferred. In zirconium, for example, this enables the identification of slip activity on a basal, prism, or 1st/2nd order pyramidal plane. In the case of a 1st-order pyramidal plane trace, the slip could be in either 〈𝑎〉 or 〈𝑐 + 𝑎〉 directions; slip trace analysis cannot discriminate between these.[5]
Diffraction-based studies measure the residual dislocation content instead of the slipped dislocations, which is only a good approximation for systems that accumulate networks of geometrically necessary dislocations, such as Face-centred cubic polycrystals.[19] In low-symmetry crystals such as hexagonal zirconium, there could be regions of the predominantly single slip where geometrically necessary dislocations may not necessarily accumulate.[20] Residual dislocation content does not distinguish between glissile and sessile dislocations. Glissile dislocations contribute to slip and hardening, but sessile dislocations contribute only to latent hardening.[5]
Diffraction methods cannot generally resolve the slip plane of a residual dislocation. For example, in Zr, the screw components of 〈𝑎〉 dislocations could slip on prismatic, basal, or 1st-order pyramidal planes. Similarly, 〈𝑐 + 𝑎〉 screw dislocations could slip on either 1st or 2nd order pyramidal planes.[5]
See also
editReferences
edit- ^ Jastrzebski, D. Nature and Properties of Engineering Materials (Wiley International ed.).
- ^ a b , Hull D., Bacon, D.J (2001); "Introduction to Dislocations", 4th ed., ISBN 0-7506-4681-0
- ^ a b Soboyejo, Wole O. (2003). "7.8 Crystal Structure and Dislocation Motion". Mechanical properties of engineered materials. Marcel Dekker. ISBN 0-8247-8900-8. OCLC 300921090.
- ^ a b c d Van Vliet, Krystyn J. (2006); "3.032 Mechanical Behavior of Materials" Archived 2009-09-17 at the Wayback Machine
- ^ a b c d Tong, Vivian; Wielewski, Euan; Britton, Ben (2018). "Characterisation of slip and twinning in high rate deformed zirconium with electron backscatter diffraction". arXiv:1803.00236.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ Orozco-Caballero, Alberto; Li, Feng; Esqué-de los Ojos, Daniel; Atkinson, Michael D.; Quinta da Fonseca, João (2018). "On the ductility of alpha titanium: The effect of temperature and deformation mode". Acta Materialia. 149: 1–10. Bibcode:2018AcMat.149....1O. doi:10.1016/j.actamat.2018.02.022. ISSN 1359-6454.
- ^ Callister, William D., Jr. (2007); "Materials Science and Engineering: An Introduction", ISBN 0-471-73696-1
- ^ a b Koko, Abdalrhaman; Elmukashfi, Elsiddig; Becker, Thorsten H.; Karamched, Phani S.; Wilkinson, Angus J.; Marrow, T. James (2022-10-15). "In situ characterisation of the strain fields of intragranular slip bands in ferrite by high-resolution electron backscatter diffraction". Acta Materialia. 239: 118284. Bibcode:2022AcMat.23918284K. doi:10.1016/j.actamat.2022.118284. ISSN 1359-6454. S2CID 251783802.
- ^ Smallman, R. E.; Ngan, A. H. W. (2014-01-01), Smallman, R. E.; Ngan, A. H. W. (eds.), "Chapter 9 - Plastic Deformation and Dislocation Behaviour", Modern Physical Metallurgy (Eighth Edition), Oxford: Butterworth-Heinemann, pp. 357–414, doi:10.1016/b978-0-08-098204-5.00009-2, ISBN 978-0-08-098204-5, retrieved 2022-10-04
- ^ Sangid, Michael D. (2013-12-01). "The physics of fatigue crack initiation". International Journal of Fatigue. Fatigue and Microstructure: A special issue on recent advances. 57: 58–72. doi:10.1016/j.ijfatigue.2012.10.009. ISSN 0142-1123.
- ^ Lukáš, P.; Klesnil, M.; Krejčí, J. (1968). "Dislocations and Persistent Slip Bands in Copper Single Crystals Fatigued at Low Stress Amplitude". Physica Status Solidi B (in German). 27 (2): 545–558. Bibcode:1968PSSBR..27..545L. doi:10.1002/pssb.19680270212. S2CID 96586802.
- ^ Schiller, C.; Walgraef, D. (1988-03-01). "Numerical simulation of persistent slip band formation". Acta Metallurgica. 36 (3): 563–574. doi:10.1016/0001-6160(88)90089-2. ISSN 0001-6160.
- ^ Akhtar, A; Teghtsoonian, A (July 1971). "Plastic deformation of zirconium single crystals". Acta Metallurgica. 19 (7): 655–663. doi:10.1016/0001-6160(71)90019-8.
- ^ Gong, Jicheng; Benjamin Britton, T.; Cuddihy, Mitchell A.; Dunne, Fionn P.E.; Wilkinson, Angus J. (September 2015). "〈a〉 Prismatic, 〈a〉 basal, and 〈c+a〉 slip strengths of commercially pure Zr by micro-cantilever tests". Acta Materialia. 96: 249–257. Bibcode:2015AcMat..96..249G. doi:10.1016/j.actamat.2015.06.020. hdl:10044/1/31552.
- ^ Wang, Leyun; Barabash, Rozaliya; Bieler, Thomas; Liu, Wenjun; Eisenlohr, Philip (August 2013). "Study of $$ \{ 11\bar{2} 1\} $$ Twinning in α-Ti by EBSD and Laue Microdiffraction". Metallurgical and Materials Transactions A. 44 (8): 3664–3674. doi:10.1007/s11661-013-1714-y. ISSN 1073-5623. S2CID 199405954.
- ^ Long, F.; Balogh, L.; Daymond, M. R. (2017-11-02). "Evolution of dislocation density in a hot rolled Zr–2.5Nb alloy with plastic deformation studied by neutron diffraction and transmission electron microscopy". Philosophical Magazine. 97 (31): 2888–2914. Bibcode:2017PMag...97.2888L. doi:10.1080/14786435.2017.1356940. ISSN 1478-6435. S2CID 136620892.
- ^ Caillard, Daniel; Rautenberg, Martin; Feaugas, Xavier (April 2015). "Dislocation mechanisms in a zirconium alloy in the high-temperature regime: An in situ TEM investigation". Acta Materialia. 87: 283–292. doi:10.1016/j.actamat.2015.01.016.
- ^ McCabe, R. J.; Cerreta, E. K.; Misra, A.; Kaschner, G. C.; Tomé, C. N. (2006-08-11). "Effects of texture, temperature and strain on the deformation modes of zirconium". Philosophical Magazine. 86 (23): 3595–3611. Bibcode:2006PMag...86.3595M. doi:10.1080/14786430600684500. ISSN 1478-6435. S2CID 137662799.
- ^ Jiang, Jun; Britton, T. Ben; Wilkinson, Angus J. (June 2015). "The orientation and strain dependence of dislocation structure evolution in monotonically deformed polycrystalline copper". International Journal of Plasticity. 69: 102–117. doi:10.1016/j.ijplas.2015.02.005. hdl:10044/1/25966.
- ^ Jiang, Jun; Zhang, Tiantian; Dunne, Fionn P. E.; Britton, T. Ben (January 2016). "Deformation compatibility in a single crystalline Ni superalloy". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 472 (2185): 20150690. Bibcode:2016RSPSA.47250690J. doi:10.1098/rspa.2015.0690. ISSN 1364-5021. PMC 4786046. PMID 26997901.
External links
edit- An online tutorial on slip, explained on DoITPoMS