Sentetsu Pashisa-class locomotive

The Pashisa class (パシサ) locomotives were a group of steam tender locomotives of the Chosen Government Railway (Sentetsu) with 4-6-2 wheel arrangement. The "Pashi" name came from the American naming system for steam locomotives, under which locomotives with 4-6-2 wheel arrangement were called "Pacific".

Chosen Government Railway Pashisa class (パシサ)
Korean National Railroad Pasi3 class (바시3)
Korean State Railway Pasisŏ class (바시서)
Type and origin
Power typeSteam
BuilderKawasaki
Build date1923
Total produced6
Specifications
Configuration:
 • Whyte4-6-2
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.1,750 mm (69 in)
Length22,060 mm (72 ft 5 in)
Width3,054 mm (10 ft 0.2 in)
Height4,228 mm (13 ft 10.5 in)
Loco weight89.60 t (88.18 long tons)
Tender weight57.50 t (56.59 long tons)
Fuel capacity9.4 t (9.3 long tons)
Water cap.22,700 L (6,000 US gal)
Firebox:
 • Grate area4.36 m2 (46.9 sq ft)
Boiler:
 • Small tubes127 x 51 mm (2.0 in)
 • Large tubes32 x 137 mm (5.4 in)
Boiler pressure13.0 kgf/cm2 (185 psi)
Heating surface:
 • Firebox17.00 m2 (183.0 sq ft)
 • Tubes187.10 m2 (2,013.9 sq ft)
 • Total surface204.10 m2 (2,196.9 sq ft)
Superheater:
 • Heating area75.30 m2 (810.5 sq ft)
Cylinders1
Cylinder size610 mm × 660 mm (24 in × 26 in)
Valve gearWalschaerts
Performance figures
Maximum speed95 km/h (59 mph)
Tractive effort140.0 kN (31,500 lbf)
Career
OperatorsChosen Government Railway
Korean National Railroad
Korean State Railway
ClassSentetsu: パシサ
KNR: 바시3
KSR: 바시서
Number in classSentetsu: 6
NumbersSentetsu: パシサ1–パシサ6
Delivered1923

In all, Sentetsu owned 144 locomotives of all Pashi classes, of which 141 survived the war; of these, 73 went to the Korean National Railroad in South Korea and 68 to the Korean State Railway in North Korea.[1]

Description

edit

Along with the six Pashii copies built by Kisha Seizō, 1923 saw the delivery of another six similar locomotives from Kawasaki of Japan, the パシサ (Pashisa) class. Originally numbered パシ957–パシ962, they became パシサ1–パシサ6 in Sentetsu's general renumbering of 1938.[2] The success of these engines and the Japanese-built Pashii copies proved that domestic (i.e. Japanese, Manchurian and Korean) industry was more than capable of building satisfactory locomotives, and signalled the end of the importation of locomotives from foreign sources.[3]

Postwar

edit

The exact dispersal of the Pashisa-class locomotives between North and South after the partition of Korea is uncertain, but it was likely an even split.[2]

Korean National Railroad 파시3 (Pasi3) class

edit

The Korean National Railroad likely received three of the six Pashisa-class locomotives; the identies of two are known for certain.[2] They were designated 파시3 (Pasi3) class,[3] and were used by the KNR on passenger trains until the end of the 1960s.

Korean State Railway 바시서 (Pasisŏ) class

edit

The Korean State Railway is believed to have received three of the six Pashisa-class locomotives.[2] Little of their service lives is known, but they were initially designated 바시서 (Pasisŏ) class, and they were likely retired by the end of the 1960s.

Construction

edit
Sentetsu running number Postwar
1923–1938 1938–1945 Owner Number Builder Year Notes
パシ957 パシサ1 ? ? Kawasaki 1923
パシ958 パシサ2 KNR 파시3-2 Kawasaki 1923
パシ959 パシサ3 ? ? Kawasaki 1923
パシ960 パシサ4 ? ? Kawasaki 1923
パシ961 パシサ5 ? ? Kawasaki 1923
パシ962 パシサ6 KNR 파시3-6 Kawasaki 1923
Total 6

References

edit
  1. ^ Hefner, James D. (28 August 1999). "North and South Korea Steam Locomotives". Archived from the original on 20 April 2004. Retrieved 18 April 2023.
  2. ^ a b c d "Korean National RR PC-3 4-6-2s". donsdepot.donrossgroup.net.
  3. ^ a b Byeon, Seong-u (1999). 한국철도차량 100년사 [Korean Railways Rolling Stock Centennial] (in Korean). Seoul: Korea Rolling Stock Technical Corp.