Salime Reservoir is a reservoir in Asturias, Spain across the Navia River. It is the third reservoir built in this river after Arbón and Doiras.

Salime Reservoir
View of the reservoir
Salime Reservoir is located in Asturias
Salime Reservoir
Location of the Salime reservoir in Asturias
CountrySpain
LocationGrandas de Salime, Asturias
Coordinates43°14′10″N 6°50′52″W / 43.23611°N 6.84778°W / 43.23611; -6.84778
Construction began1948
Opening date1954
Owner(s)Saltos del Navia en Comunidad
Dam and spillways
Type of damGravity dam
ImpoundsNavia River
Height125.67 m (412.3 ft)
Length250 m (820 ft)
Dam volume645,000 m3 (844,000 cu yd)
Spillways1 main
Spillway capacity1,658 m3/s (58,600 cu ft/s)
Reservoir
CreatesSalime Reservoir
Total capacity266.3 hm3 (215,900 acre⋅ft)
Catchment area1,806 km2 (697 sq mi)
Surface area685 ha (1,690 acres)
Power Station
Turbines4x 32MW Francis
Installed capacity128 MW
Annual generation350,000,000 KWh

It is formed by a 128 meters high Gravity dam and it is located at the confluence of the municipalities of Pesoz, Grandas de Salime and Allande. The road AS-14 runs over the dam. The occupied area by the reservoir is 685 ha between Grandas de Salime and Ibias in Asturias and Negueira de Muñiz in Lugo.

The dam serves mainly to generate hydroelectric power, but it is also used for recreational uses.

History

edit
 
Dam at Grandas de Salime
 
View of the town of Salime from the South in 1952
 
Construction of the dam in 1955 (Archivio storico Touring Club Italiano)

Planning

edit

The idea of building a power station in the zone started in 1940 in the location where Narciso Hernández Vaquero planned originally.[1]

Immediately after the World War II, the project, made by the architect Joaquin Vaquero Palacios, and the construction started. For paying the works, the companies Hidroeléctrica del Cantábrico and Electra de Viesgo created the company Saltos del Navia en Comunidad, endorsed by Banco Urquijo, whose office prepared the technical reports.

Previous works

edit

The works started in 1946, being necessary to divert the river. For that purpose, a tunnel of 30,725 m3 was dug. 11,789 m3 of concrete were used to coat it.

The supply of materials was made by a 36 km cable car that reached the port of Navia. Four villages were also built to host more than 3,500 workers.

The dam

edit

The dam was built between 1948 and 1953 with 630,000 m3 of concrete with slopes of 5% upstream and 72% downstream. The height above the foundation was 132 meters, so that once stood as the largest dam of Spain and second in Europe.

It is located 22 km upstream of the Doiras reservoir, and to build it there were enormous difficulties. Spain was plunged into misery and suffering the embargo of the victorious powers in World War II. This project was a dream almost impossible and yet was completed in 1954 despite the lack of resources. Although the United Nations had declared the embargo against Francoist Spain, the United Kingdom secretly supplied the turbines and the generators.[2]

During the works, died between 100 and 300 workers due to poor working conditions.

Environmental impact

edit

For the construction of the reservoir, it was necessary to flood 685 ha. 1,955 fincas with about 40,000 trees composed this surface. Also, several roads were closed, like the old AS-34, which was replaced by the new AS-14. This new road passes above the dam.

In some places there were created routes with boats to cross the reservoir.

References

edit
  1. ^ Salime, un salto de arte y energía La Nueva España, 15 May 2011 (in Spanish)
  2. ^ Rieles sobre el tiempo La Nueva España, 30 December 2008 (in Spanish)
edit