ROBO 3D was an American 3D printer manufacturer located in San Diego, California and traded in Australian Securities Exchange under symbol ASX: RBO.
| Robo 3D Limited | |
| ASX: RBO | |
| Founded | 2012 in San Diego, California |
| Founder | Braydon Moreno[1] |
Number of employees | 30 |
Founded in 2012, Robo 3D is a company that started on Kickstarter with their first product the Robo 3D R1. Their product line includes the Robo R1+, Robo C2, and Robo R2, and Robo E3, which all utilize the open materials ideology and are compatible with a variety of 3D modeling softwares, such as Solidworks and Sketch Up, along with free 3D model sharing websites, such as Thingiverse.[2] Robo 3D shifted their focus to education in early 2018 and have acquired a 300+ lesson 3D printable STEM curriculum platform called MyStemKits.com.[3] Now, with their new Robo E3 3D printer and MyStemKits curriculum, they have a full, turn-key solution for 3D printing in the classroom.
History edit
In 2012, a group of students from San Diego State University (SDSU), frustrated by the cost of using the school’s only expensive and industrial 3D printer, set out to create their own 3D printer. The motivation was to create a cheaper alternative to the current leading 3D printing brands.[4]
After beginning product development on a dining room table, the group went to Kickstarter to seek funding. With a funding target of $49,000, a total of $649,663 was pledged.[5]
On January 16, 2014, Robo3D was mentioned in Time magazine's article on 3D printers at CES.[6] On August 20, 2015, Fine Brothers Entertainment released an episode of 'Elders React to 3D Printers' which features a Robo 3D R1 printer.[7]
In 2016, the company's stock debuted on the Australian Securities Exchange. It initially traded for a higher price per share than the initial public offering.[8]
In April 2018, the company announced support for New Matter printers.[9]
The R1 edit
The physical dimensions of the R1 are 17 by 15 by 18 inches (43 cm × 38 cm × 46 cm) allowing it to have a build volume of 10 by 9 by 8 inches (25 cm × 23 cm × 20 cm) or 720 cubic inches (11.8 L). It weighs 28 lbs.[10] The layer resolution is 100 µm on high, 200 µm on medium and 300 µm on low. The filament diameter is 1.75 mm and the nozzle diameter is 0.4 mm.[11][12]
The R2 edit
The R2 was released in 2017. It measures 23.8 inches by 16.8 inches by 16.6 inches and weighs 25.5 pounds. The build area of 10" x 8" x 8" is smaller than the build area of the R1. The unit comes standard with one extruder but can accommodate a second optional extruder for two color printing.[13]
See also edit
References edit
- ^ Walls, Patt. "Founder". Starter Story. Retrieved 14 February 2020.
- ^ Moreno, Braydon (2018-05-01). "Raising 13x Their Original Kickstarter Goal With a Viral 3D Printer - Starter Story". www.starterstory.com. Retrieved 2023-02-12.
- ^ "Robo Acquires Leading STEM Curriculum Company, MyStemKits". The EdTech Roundup. 2018-09-10. Retrieved 2023-02-11.
- ^ "Braydon Moreno - CEO of Robo 3D Printer |". Ideamensch.com. 2013-11-13. Retrieved 2023-02-11.
- ^ "3D Printing: Sparking an E-Commerce Revolution". E-Commerce Times. 2013-09-02. Retrieved 2023-02-11.
- ^ Taylor, Ben (2014-01-16). "Best- and Worst-Case Scenarios for Four 3D Printers | TIME.com". Techland.time.com. Retrieved 2014-03-13.
- ^ Archived at Ghostarchive and the Wayback Machine: ELDERS REACT TO 3D PRINTERS. YouTube.
- ^ Sile, Aza Wee (2016-12-21). "3D printing startup debuts at a premium on the ASX". CNBC. Retrieved 2018-08-02.
- ^ Mensley, Matthew (2018-04-26). "Robo 3D Picks Up Official Support Duties for New Matter Printers". All3DP. Retrieved 2023-02-12.
- ^ "Robo 3D R1 +Plus Review". PCMAG. Retrieved 2023-02-12.
- ^ Stafford, Jesse (2014-10-27). "Robo 3D Printer Specifications, Pros and Cons | 3DPrintingGeeks.com". 3DPrintingGeeks.com. Retrieved 2015-01-20.
- ^ Stafford, Jesse. "Robo 3D Printer Specifications | Robo3Dprinter". Robo3Dprinter. Archived from the original on 2014-08-22. Retrieved 2015-01-20.
- ^ Hoffman, Tony (2017-11-02). "Robo R2 (2017)". PC Magazine. Retrieved 2023-02-11.