Portal:Electronics/Selected picture

Selected picture 1

Selected picture 2

Portal:Electronics/Selected picture/2


Credit: User:John Fader
Both sides of the printed circuit board inside a typical keydrive (circa 2004), in this case an inexpensive 64 Mbyte USB2.0 device.

Selected picture 3

Portal:Electronics/Selected picture/3


Credit: User:Jeremykemp, User:pbroks13
A mouse. 1: Pulling the mouse turns the ball. 2: X and Y rollers grip the ball and transfer movement. 3: Optical encoding disks include light holes. 4: Infrared LEDs shine through the disks. 5: Sensors gather light pulses to convert to X and Y velocities.

Selected picture 4

Portal:Electronics/Selected picture/4


Credit: Matt Gibbs, User:Matt Britt
Macro shot of an Intel 80486DX2 CPU die in its packaging. The actual size of the die in the center is 12×6.75 mm.

Selected picture 5

Portal:Electronics/Selected picture/5


Credit: User:BillC
Idealised single-phase transformer showing path of magnetic flux through the core.

Selected picture 6

Selected picture 7

Portal:Electronics/Selected picture/7


Credit: commons:User:Peo
Illustration showing the interior of a cathode-ray tube for color televisions and monitors.

Selected picture 8

Portal:Electronics/Selected picture/8


Credit: User:Matt Britt
Partial map of the Internet from the 2005-01-15 data found here.

Selected picture 9

Portal:Electronics/Selected picture/9


Credit: User:Fastfission
MRI sections through the Z-axis in a normal human adult.

Selected picture 10

Selected picture 11

Portal:Electronics/Selected picture/11


Credit: Corps of Engineers
This 90-foot (27m) diameter radar installation monitors the northern Alaskan sky.

Selected picture 12

Selected picture 13

Selected picture 14

Selected picture 15

Portal:Electronics/Selected picture/15


Credit: Tony R. Kuphaldt, User:Dna-webmaster
Lissajous figures on an oscilloscope (90 degrees phase shift).

Selected picture 16

Selected picture 17

Portal:Electronics/Selected picture/17


Credit: User:Jjron
The interior of the Australian Synchrotron facility. Dominating the image is the storage ring, with an experimental endstation at front right. In the middle of the storage ring is the booster synchrotron and linac

Selected picture 18

Portal:Electronics/Selected picture/18


Credit: User:Chameleon
Map of the world colored by type of plug used.

Selected picture 19

Selected picture 20

Selected picture 21

Portal:Electronics/Selected picture/21


Credit: [1], User:Jason Palpatine
Bombardier's Information File(BIF) that describes the components and controls of the Norden bombsight.

Selected picture 22

Portal:Electronics/Selected picture/22


Credit: commons:User:Richard Bartz
A parabolic antenna in Erdfunkstelle Raisting, the biggest facility for satellite communication in the world.

Selected picture 23

Selected picture 24

Selected picture 25

Portal:Electronics/Selected picture/25


Credit: User:MIckStephenson
The yellow-tipped EIAJ connector is a small (~2 cm) standard DC power supply jack for small appliances, commonly used to adapt transformers converting mains power for laptop computers and peripheral devices.

Selected picture 26

Portal:Electronics/Selected picture/26


Credit: de:Benutzer:Peter nussbaumer
A magnet is suspended over a liquid nitrogen cooled high-temperature superconductor (-200°C).

Selected picture 27

Selected picture 28

Selected picture 29

Selected picture 30

Selected picture 31

Selected picture 32

Selected picture 33

Selected picture 34

Selected picture 35

Selected picture 36

Selected picture 37


Suggestions

Is there a high quality electronics-related picture this portal can't live without? Please post your suggestions below to let your voice be heard.

Procedure

The nomination process here is relaxed, but articles that meet the featured article or featured picture requirements are more likely to gain support.

Nominating articles

  1. Find a picture or animation related to electronics that you think is very good. It need not be a current Featured Article or Featured picture, but if it is, it could only help the nomination.
    • If the article was previously nominated for featured status, or if it has been on peer review, try to resolve as many of the remaining objections as possible.
  2. In the nominations section below, add a third level section header with the linked page title as the section name (===[[Page title]]===). Below this new header, add your reasons for nomination and sign your nomination with ~~~~.

Supporting and objecting

  • If you approve of a nomination, write "Support" followed by your reasons.
    • A nomination is considered a vote in support, so nominators don't need to add another vote to their nominations.
  • If you oppose a nomination, write "Oppose" followed by the reasons for your objection. Where possible, objections should provide a specific rationale that can be addressed.
    • To withdraw an objection, strike it out (with <s>...</s>) rather than removing it.

Nominations