Module:Location map/data/Bhutan/doc


Location map of Bhutan
name Bhutan
border
coordinates
28.5
88.6 ←↕→ 92.3
26.4
map center 27°27′N 90°27′E / 27.45°N 90.45°E / 27.45; 90.45
image Bhutan location map.svg
image1 Bhutan relief map.svg
image2 Bhutan physical map.svg
image3 Bhutan highways blank location map.png
image4 Bhutan protected areas location map.png
image5 Jigme Dorji protected area location map.png
image6 Jigme Singye protected area location map.png
image7 Khaling protected area location map.png
image8 Phibsoo protected area location map.png
image9 Thrumshingla protected area location map.png
image10 Torsa protected area location map.png
image11 Wangchuck Centennial protected area location map.png
Map of Bhutan (2010)

Module:Location map/data/Bhutan is a location map definition used to overlay markers and labels on an equirectangular projection map of Bhutan. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Bhutan":

Map definition

  • name = Bhutan
    Name used in the default map caption
  • bottom = 26.4
    Latitude at bottom edge of map, in decimal degrees
  • left = 88.6
    Longitude at left edge of map, in decimal degrees
  • right = 92.3
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The maps displayed as image2 / image3 / image4 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 3.7 degrees.

  • At an image width of 200 pixels, that is 0.0185 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0037 degrees per pixel.

Latitude: from North to South this map definition covers 2.1 degrees.

  • At an image height of 200 pixels, that is 0.0105 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0021 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

 
 
Thimphu
Thimphu (Bhutan)
{{Location map | Bhutan
| width   = 250
| lat_deg = 27.47
| lon_deg = 89.64
| label   = Thimphu
}}

Location map many, using relief map (image1)

 
 
Thimphu
 
Phuntsholing
Two locations in Bhutan
{{Location map many | Bhutan
| relief   = yes
| width    = 250
| caption  = Two locations in Bhutan
| lat1_deg = 27.47
| lon1_deg = 89.64
| label1   = Thimphu
| lat2_deg = 26.85
| lon2_deg = 89.38
| label2   = Phuntsholing
}}

Location map+, using AlternativeMap

 
 
Thimphu
 
Phuntsholing
Two locations in Bhutan
{{Location map+ | Bhutan
| AlternativeMap = Bhutan physical map.svg
| caption = Two locations in Bhutan
| width   = 250
| places  =
  {{Location map~ | Bhutan
  | lat_deg = 27.47
  | lon_deg = 89.64
  | label   = Thimphu
  }}
  {{Location map~ | Bhutan
  | lat_deg = 26.85
  | lon_deg = 89.38
  | label   = Phuntsholing
  }}
}}

See also

Location map templates

Creating new map definitions