Microchannel in microtechnology is a channel with a hydraulic diameter below 1 mm, usually 1–99 μm.[1] Microchannels are used in fluid control (see Microfluidics), heat transfer (see Micro heat exchanger) and cell migration observation.[2] They are more efficient than their 'macro' counterparts, because of a high surface-area to volume ratio yet pose a multitude of challenges due to their small size.[3]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d0/Cell_in_a_microchannel.png/220px-Cell_in_a_microchannel.png)
Materials
editDifferent types of materials are required for the different uses of microchannels. These are the three main categories.[4]
Polymeric and glass substrates
editpolymethyl methacrylate (PMMA) is used as a solution to a wide range of microfluidic devices due to its low cost and easier fabricating methods.[4] Silicon elastomers can be used for situations in which elasticity and deformation is necessary.[5]
Metallic substrates
editMetallic substrates are often chosen for their advantageous metallic properties, such as withstanding high temperatures and transferring heat faster. They can be subject to corrosion.[4][6]
Semiconductors, ceramics and composites
editCeramic materials allow for high-temperature operation in comparison to metallic substrates and enable operation in harsh chemical environments in which metals cannot be used.[7]
History
editThe concept of the microchannel was proposed for the first time by researchers Tuckerman and Pease of Stanford Electronics Laboratories in 1981.[8] They suggested an effective method for designing microchannels in the laminar and fully developed flow.[9]
Common uses
editMicrochannels are extensively used in the pharmaceuticals, and biochemical industries due to short diffusion distances, higher interfacial area, and higher heat/mass transfer rates.[10]
See also
editSources
edit- ^ Kandlikar, Satish G. (2006). Heat transfer and fluid flow in minichannels and microchannels. Amsterdam, the Netherlands: Elsevier B.V. pp. 450. ISBN 978-0-08-044527-4.
- ^ "Microchannels". 4Dcell. Retrieved 2022-07-15.
- ^ Puccio, Kris (2020-02-10). "Understanding Microchannel Heat Exchangers & Their Use Cases". Therma. Retrieved 2022-07-15.
- ^ a b c Prakash, Shashi; Kumar, Subrata. "Fabrication of microchannels: A review". Journal of Engineering Manufacture. 229 (8).
- ^ Yuen, Michelle; Kramer, Rebecca. "Fabricating microchannels in elastomer substrates for stretchable electronics" (PDF). MSEC Science.
- ^ Andou, F.; Yamamoto, A.; Kawai, T.; Ohmori, H.; Ishida, T.; Takeuchi, Y. (2007-01-01), Arai, Eiji; Arai, Tatsuo (eds.), "MICROCHANNEL ARRAY CREATION BY MEANS OF ULTRAPRECISION MACHINING", Mechatronics for Safety, Security and Dependability in a New Era, Oxford: Elsevier, pp. 163–168, ISBN 978-0-08-044963-0, retrieved 2022-07-15
- ^ Kee, Robert J.; Almand, Berkeley B.; Blasi, Justin M.; Rosen, Benjamin L.; Hartmann, Marco; Sullivan, Neal P.; Zhu, Huayang; Manerbino, Anthony R.; Menzer, Sophie; Coors, W. Grover; Martin, Jerry L. (2011-08-01). "The design, fabrication, and evaluation of a ceramic counter-flow microchannel heat exchanger". Applied Thermal Engineering. 31 (11): 2004–2012. Bibcode:2011AppTE..31.2004K. doi:10.1016/j.applthermaleng.2011.03.009. ISSN 1359-4311.
- ^ Tuckerman, D. B., & Pease, R. F. W. (1981). High-performance heat sinking for VLSI. IEEE Electron device letters, 2(5), 126-129. https://dx.doi.org/10.1109/EDL.1981.25367
- ^ Salimpour, M. R., Al-Sammarraie, A. T., Forouzandeh, A., & Farzaneh, M. (2019). Constructal design of circular multilayer microchannel heat sinks. Journal of Thermal Science and Engineering Applications, 11(1), 011001. https://dx.doi.org/10.1115/1.4041196
- ^ Jaiswal, P., Kumar, U., Biswas, K. G.(2021) Liquid-Liquid Flow through Micro Dimensional Reactors: A Review on Hydrodynamics, Mass Transfer, and Reaction Kinetics. Exp. Comput. Multiph. Flow 2021. https://doi.org/10.1007/s42757-020-0092-0