Laurolactam is an organic compound from the group of macrocyclic lactams. Laurolactam is mainly used as a monomer in engineering plastics, such as nylon-12 and copolyamides.[2]

Laurolactam
Names
IUPAC name
Azacyclotridecan-2-one
Other names
Dodecalactam
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.012.204 Edit this at Wikidata
UNII
  • InChI=1S/C12H23NO/c14-12-10-8-6-4-2-1-3-5-7-9-11-13-12/h1-11H2,(H,13,14)
    Key: JHWNWJKBPDFINM-UHFFFAOYSA-N
  • InChI=1/C12H23NO/c14-12-10-8-6-4-2-1-3-5-7-9-11-13-12/h1-11H2,(H,13,14)
    Key: JHWNWJKBPDFINM-UHFFFAOYAS
  • C1CCCCCC(=O)NCCCCC1
Properties
C12H23NO
Molar mass 197.322 g·mol−1
Appearance colourless solid
Melting point 152.5 °C (306.5 °F; 425.6 K)[1]
Boiling point 314.9±10 °C
0.03 wt%
Hazards
Flash point 192 °C (378 °F; 465 K)
320 to 330 °C (608 to 626 °F; 593 to 603 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Synthesis

edit

Although a derivative of 12-aminododecanoic acid, it is made from cyclododecatriene. The triene is hydrogenated to the saturated alkane, cyclododecane. For the production of laurolactam, cyclododecane is oxidized with air or oxygen in the presence of boric acid and transition metal salts (e.g. cobalt(II) acetate), obtaining a mixture[3] of cyclododecanol and cyclododecanone. This mixture is quantitatively dehydrogenated on a copper contact catalyst to cyclododecanone and this reacted with hydroxylamine to cyclododecanone oxime. The oxime is rearranged to laurolactam in a Beckmann rearrangement in the presence of a strong acid.[4][5][6]

 
Formation of laurolactam

An alternative process is the photonitrosation of cyclododecane with nitrosyl chloride[3] in the presence of anhydrous hydrogen chloride.[7] The resulting cyclododecanone oxime is extracted with concentrated sulfuric acid and rearranged to laurolactam by heating to 160 °C. The overall yield (photonitrogenation + Beckmann rearrangement) is up to 93%.[2]

Properties

edit

Laurolactam is a water-insoluble, crystalline solid; in technical quality usually beige colored and in pure state (99.9% purity) white. It is soluble in many organic solvents, e. g. 1,4-dioxane, benzene or cyclohexane. The purification process is carried out conventionally by multistage distillation under reduced pressure.[2] The combination of distillation and crystallization from solution or melt yields very pure laurolactam (> 99%).[8] The risk posed by laurolactam is considered to be low.[9]

Uses

edit

Ring opening polymerization is used to polymerize the monomer to nylon-12. The reaction can be brought about with cationic or anionic initiators or with water. Cationic polymerization with acid is believed to involve the initial O-protonation. Nucleophilic attack by the monomer on the reactive protonated nitrogen, followed by successive ring-opening acylation of the primary amine results in the formation of the polyamide.[10] The ring-opening polymerization of the monomer laurinlactam initially proceeds upon addition of water in a pre-polymerization at about 300 °C under pressure to a prepolymer. This prepolymer is reacted in a subsequent polycondensation at ambient or reduced pressure and temperatures of about 250 °C to higher molecular weight polyamide 12 ( PA 12: -[NH-(CH2)11-CO]n-).[11]

 

As a comonomer, laurolactam is used together with ε-caprolactam for the preparation of copolyamide 6/12.[12]

Drug Use

edit
 
ChemDrug Synthesis:[13] Patent:[14]

Laurolactam is used in the synthesis of MDL-12330A [40297-09-4]. Although at first glance it appears as though Laurolactam is condensed with cypenamine, the authors stated that cis stereochemistry is chosen. The molecule is said to act as a Calcium Channel Blocker.

References

edit
  1. ^ Bradley, Jean-Claude; Williams, Antony; Lang, Andrew (2014): Jean-Claude Bradley Open Melting Point Dataset. figshare. doi:10.6084/m9.figshare.1031637
  2. ^ a b c T. Schiffer, G. Oenbrink: Cyclododecanol, Cyclododecanone, and Laurolactam. In: Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH, Weinheim 2002, doi:10.1002/14356007.a08_201.
  3. ^ a b H.-J. Arpe: Industrielle Organische Chemie. 6., vollst. überarb. Aufl., Wiley-VCH Verlag, Weinheim, 2007, ISBN 978-3-527-31540-6.
  4. ^ Douglass F. Taber, Patrick J. Straney (December 2010), [PDF "The Synthesis of Laurolactam from Cyclododecanone via a Beckmann Rearrangement"], Journal of Chemical Education (in German), vol. 87, no. 12, p. 1392, Bibcode:2010JChEd..87.1392T, doi:10.1021/ed100599q {{citation}}: Check |url= value (help)
  5. ^ Patent US8309714: Process for producing laurolactam. invent1: J. Kugimoto et al., assign1: Ube Industries, Ltd., erteilt am 13. Nov. 2012.
  6. ^ Y. Furuya et al.: Cyanuric Chloride as a Mild and Active Beckmann Rearrangement Catalyst. In: J.Am.Chem.Soc. 127, Nr. 32, 2005, S. 11240–11241, doi:10.1021/ja053441x
  7. ^ US 6197999, J. Ollivier, D. Drutel, issued 2001-03-06, assigned to Atofina 
  8. ^ US 8399658, A. Hengstermann et al., "Method for isolation of laurolactam from a laurolactam synthesis process stream", issued 2013-03-19, assigned to Evonik Degussa GmbH 
  9. ^ "OECD: Screening Information Dataset (SIDS) Initial Assessment Report (SIAR)" (PDF).
  10. ^ Stevens, M. P. Polymer Chemistry: An Introduction, Oxford University Press: New York, 1999.
  11. ^ US 5362448, A. Kawakami et al., "Continuous polymerization method of laurolactam and apparatus therefor", issued 1994-11-08, assigned to Ube Industries, Ltd. 
  12. ^ DE 3730504, E. De Jong et al., "Copolyamides containing caprolactam and laurolactam, process for the preparation thereof and use thereof for heat-sealing textiles", issued 1989-03-16, assigned to Atochem Werke GmbH 
  13. ^ Castaer, J.; Hillier, K.; RMI-12,330A. Drugs Fut 1979, 4, 12, 893.
  14. ^ Johann M. Grisar, Thomas R. Blohm, & Edward M. Roberts, U.S. patent 4,126,611 (to Richardson Vicks Inc).