ipconfig
(standing for "Internet Protocol configuration") is a console application program of some computer operating systems that displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings.[1] IPCONFIG
![]() Screenshot of ipconfig /all output in Windows XP | |
Developer(s) | Microsoft, ReactOS Contributors, Apple Inc. |
---|---|
Written in | C |
Operating system | Windows, ReactOS, macOS |
Platform | Cross-platform |
Type | Command |
License | Windows: Proprietary commercial software ReactOS: GPLv2 |
Implementations
editThe command is available in Microsoft Windows, ReactOS, and in Apple macOS. The ReactOS version was developed by Ged Murphy and is licensed under the GPL.[2]
Microsoft Windows, ReactOS
editThe ipconfig
command supports the command-line switch /all
. This results in more detailed information than ipconfig
alone.
An important additional feature of ipconfig
is to force refreshing of the DHCP IP address of the host computer to request a different IP address. This is done using two commands in sequence. First, ipconfig /release
is executed to force the client to immediately give up its lease by sending the server a DHCP release notification which updates the server's status information and marks the old client's IP address as "available". Then, the command ipconfig /renew
is executed to request a new IP address.[3][4] Where a computer is connected to a cable or DSL modem, it may have to be plugged directly into the modem network port to bypass the router, before using ipconfig /release
and turning off the power for a period of time, to ensure that the old IP address is taken by another computer.[5]
The /flushdns
parameter can be used to clear the Domain Name System (DNS)[6] cache to ensure future requests use fresh DNS information by forcing hostnames to be resolved again from scratch.[7]ping ip config)
Apple macOS
editipconfig
in Mac OS X serves as a wrapper to the IPConfiguration agent, and can be used to control the Bootstrap Protocol and DHCP client from the command-line interface.[8] For example, you can release and renew an IP address if it happened to be assigned incorrectly by the DHCP server during the automated assignment process.[9] Like most Unix-based operating systems, Mac OS X also uses ifconfig
for more direct control over network interfaces, such as configuring static IP addresses. The Ifconfig command in Linux has been replaced by the IP command
See also
edit
References
edit- ^ "ipconfig". Microsoft Docs. 16 October 2017. Retrieved 25 August 2020.
- ^ "Reactos/Ipconfig.c at master · reactos/Reactos". GitHub.
- ^ Release and Renew Your IP Address
- ^ Windows – Displaying, Releasing and Renewing a DHCP Lease
- ^ whatsmyipaddress: How to change your IP address
- ^ "Domain Name System (DNS)", Understanding IPv6, New York: Springer-Verlag, pp. 151–172, ISBN 0-387-25429-3, retrieved 2024-03-06
- ^ Windows 8.1 PCs Connect to the Network but not the Internet
- ^ OS X developer manual
- ^ "Ipconfig – network administration via the command line". IONOS Digitalguide. Retrieved 2022-08-23.
Further reading
edit- Frisch, Æleen (2001). Windows 2000 Commands Pocket Reference. O'Reilly. ISBN 978-0-596-00148-3.
- Stanek, William R. (2008). Windows Command-Line Administrator's Pocket Consultant, 2nd Edition. Microsoft Press. ISBN 978-0735622623.
- Barrett, Daniel J. (2012). Macintosh Terminal Pocket Guide: Take Command of Your Mac. O'Reilly. ISBN 978-1449328986.
External links
edit- Windows
- Mac OS X