The Gewehr-Sprenggranate was a high-explosive rifle grenade that was developed by Germany and used by the Wehrmacht during World War II.

Gewehr-Sprenggranate
A schematic of components.
TypeRifle grenade
Place of origin Nazi Germany
Service history
Used byWehrmacht
WarsWorld War II[1]
Specifications
Mass260 g (9 oz)
Length140 mm (5.5 in)
Diameter30 mm (1.2 in)

Maximum firing range500 m (550 yd)[1]
WarheadPETN
Warhead weight31 g (1.1 oz)
Detonation
mechanism
Impact Fuze
4.5 second friction igniter
6.5 second time fuze
11 seconds total[1]

Design

edit
 
Drawings of German Schiessbecher and grenades.

The Gewehr-Sprenggranate was launched from a Gewehrgranatengerät or Schiessbecher ("shooting cup") on a standard service rifle by a blank cartridge. The Gewehr-Sprenggranate consisted of a tubular steel body filled with PETN, a rifled driving band, a nose impact fuze, a friction igniter, and a time fuze. The fuze and base assemblies are not integral parts of the grenade but are screwed into the center of the nose and base. When the rifle is fired the flash from the blank cartridge enters a hole in the base of the grenade which starts both a friction igniter and a time fuze. The grenade will then detonate on contact by the impact fuze, detonate after 4.5 seconds by the friction igniter or detonate after another 6.5 seconds by a time fuze for a total of 11 seconds. The grenade may also be used as a hand grenade by removing the base assembly and pulling a cord attached to the friction igniter.[1]

References

edit
  1. ^ a b c d unknown (1 August 1945). Catalog Of Enemy Ordnance Material. www.paperlessarchives.com/FreeTitles/CatalogOfEnemyOrdnanceMateriel.pdf: Office of the chief of ordnance. p. 317.