Fuji Molten Salt Reactor

The FUJI molten salt reactor is a proposed molten-salt-fueled thorium fuel cycle thermal breeder reactor, using technology similar to the Oak Ridge National Laboratory's Molten Salt Reactor Experimentliquid fluoride thorium reactor. It was being developed by the Japanese company International Thorium Energy & Molten-Salt Technology (IThEMS), together with partners from the Czech Republic. As a breeder reactor, it converts thorium into the nuclear fuel uranium-233. To achieve reasonable neutron economy, the chosen single-salt design results in significantly larger feasible size[clarification needed] than a two-salt reactor (where blanket is separated from core, which involves graphite-tube manufacturing/sealing complications). Like all molten salt reactors, its core is chemically inert and under low pressure, helping to prevent explosions and toxic releases. The proposed design is rated at 200 MWe output.[1] The IThEMS consortium planned to first build a much smaller MiniFUJI 10 MWe reactor of the same design once it had secured an additional $300 million in funding.[2]

IThEMS closed in 2011 after it was unable to secure adequate funding.[3] A new company, Thorium Tech Solution (TTS), was founded in 2011 by Kazuo Furukawa, the chief scientist from IThEMS, and Masaaki Furukawa. TTS acquired the FUJI design and some related patents.[4]

See also

edit

References

edit
  1. ^ Status of Small Reactor Designs Without On-Site Refuelling (PDF), Vienna, Austria: IAEA, 2007, ISBN 978-9201156068, retrieved 2013-08-13
  2. ^ "Partnerships toward a miniFuji Thorium Molten Salt Reactor". 1 October 2010. Retrieved 2013-08-13.
  3. ^ Halper, Mark (March 22, 2013). "A plan to turn Japan's nuclear past into its future with molten salt reactors". Archived from the original on 2017-03-09. Retrieved 5 May 2018.
  4. ^ "The Purpose of TTS". Thorium Tech Solution Inc. Archived from the original on 5 March 2016. Retrieved 29 October 2016.
edit