Flipper (Danish dinghy)

The Flipper, sometimes called the Flipper Export, is a Danish sailboat that was designed by Peter Bruun as a racer and first built in 1970.[1][2]

Flipper
Development
DesignerPeter Bruun
LocationDenmark
Year1970
No. built15,000
Builder(s)Intermark Sailcraft
NameFlipper
Boat
Displacement154 lb (70 kg)
Draft2.62 ft (0.80 m) with the daggerboard down
Hull
Typemonohull
Constructionfiberglass
LOA13.25 ft (4.04 m)
Beam4.33 ft (1.32 m)
Hull appendages
Keel/board typedaggerboard
Rudder(s)transom-mounted rudder
Rig
Rig typeBermuda rig
Sails
Sailplanfractional rigged sloop
Total sail area107.64 sq ft (10.000 m2)

The boat is sometimes confused with the 1970 American Flipper dinghy, of which 582 were built.[3]

Production

edit

The design was built by Intermark Sailcraft ApS in Denmark, with 15,000 boats completed, starting in 1970, but it is now out of production.[1]

Design

edit

The Flipper is a recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig, a scow hull, a plumb transom, a transom-hung rudder controlled by a tiller and a removable daggerboard. It displaces 154 lb (70 kg).[1]

The boat has a draft of 2.62 ft (0.80 m) with the daggerboard extended and 4 in (10 cm) with it retracted, allowing beaching or ground transportation on a trailer.[1]

See also

edit

References

edit
  1. ^ a b c d McArthur, Bruce (2020). "Flipper Export sailboat specifications and details". sailboatdata.com. Archived from the original on 21 April 2021. Retrieved 21 April 2021.
  2. ^ McArthur, Bruce (2020). "Peter Bruun". sailboatdata.com. Archived from the original on 21 April 2021. Retrieved 21 April 2021.
  3. ^ McArthur, Bruce (2020). "Flipper sailboat". sailboatdata.com. Archived from the original on 21 April 2021. Retrieved 21 April 2021.
edit