Fir Creek (Bull Run River tributary)

Fir Creek is a tributary, about 5 miles (8 km) long, of the Bull Run River in the U.S. state of Oregon. Part of the system that provides drinking water to the city of Portland, it flows generally northwest through a protected part of the Mount Hood National Forest in Clackamas and Multnomah counties. It joins the Bull Run River at the upper end of Bull Run Reservoir 1, about 14 miles (23 km) from the larger stream's confluence with the Sandy River.

Fir Creek
Fir Creek
Bull Run River watershed
Fir Creek (Bull Run River tributary) is located in Oregon
Fir Creek (Bull Run River tributary)
Location of the mouth of Fir Creek in Oregon
Location
CountryUnited States
StateOregon
CountyMultnomah and Clackamas counties
Physical characteristics
SourceMount Hood National Forest
 • locationClackamas County, Oregon
 • coordinates45°27′36″N 121°57′07″W / 45.46000°N 121.95194°W / 45.46000; -121.95194[1]
MouthBull Run River
 • location
Multnomah County, Oregon
 • coordinates
45°29′26″N 122°01′41″W / 45.49056°N 122.02806°W / 45.49056; -122.02806[1]
 • elevation
1,089 ft (332 m)[1]
Length5 mi (8.0 km)[2]
Basin size5.46 sq mi (14.1 km2)[3]
Discharge 
 • location0.6 miles (1 km) from the mouth[3]
 • average34.5 cu ft/s (0.98 m3/s)[3]
 • minimum1.4 cu ft/s (0.040 m3/s)
 • maximum1,690 cu ft/s (48 m3/s)

Course

edit

The creek arises in the Mount Hood National Forest in northern Clackamas County near its border with Multnomah County. The stream flows north, crossing the border almost immediately and entering Multnomah County. Turning west, it receives an unnamed tributary from the right before turning gradually northwest. It passes under Forest Road 1211 and by a United States Geological Survey (USGS) stream gauge 0.6 miles (1 km) from the mouth. The creek joins the main stem Bull Run River near the upper end of Bull Run Reservoir 1, about 14 miles (23 km) from where the river joins the Sandy River.[2][4]

Discharge

edit

Since 1975 the USGS has monitored the flow of Fir Creek at a stream gauge 0.6 miles (1 km) from the mouth. The average flow between then and 2009 was 34.5 cubic feet per second (0.98 m3/s). This is from a drainage area of about 6 square miles (16 km2). The maximum flow recorded during this period was 1,690 cubic feet per second (48 m3/s) on November 25, 1999. The minimum was 1.4 cubic feet per second (0.04 m3/s) on September 5–7, 2003.[3]

Watershed

edit

The Bull Run River watershed, which includes Fir Creek, drains 139 square miles (360 km2).[5] The basin, which is the main source of Portland's drinking water, is largely restricted to uses related to water collection, storage, treatment, and forest management. The Fir Creek basin of about 6 square miles (16 km2) amounts to about 4 percent of the total Bull Run River watershed,[3] which is managed by the Portland Water Bureau and the United States Forest Service.[6]

See also

edit

References

edit
  1. ^ a b c "Fir Creek". Geographic Names Information System (GNIS). United States Geological Survey. November 28, 1980. Retrieved May 20, 2010.
  2. ^ a b Oregon Atlas and Gazetteer (Map) (2008 ed.). DeLorme Mapping. § 30. ISBN 978-0-89933-347-2. Approximate length determined by map scale and ruler.
  3. ^ a b c d e "Water-data report 2009: 14138870 Fir Creek near Brightwood, OR" (PDF). United States Geological Survey. Retrieved May 20, 2010. Stated watershed size includes only that part of the watershed above river mile 0.6 (river kilometer 1.0).
  4. ^ United States Geological Survey (USGS). "United States Geological Survey Topographic Map, Hickman Butte and Brightwood quadrants". TopoQuest. Retrieved May 20, 2010.
  5. ^ Portland Water Bureau, "Landscape Conditions", p. 52
  6. ^ "Map of Bull Run Management Unit". Portland Water Bureau. Retrieved May 20, 2010.

Works cited

edit
  • Portland Water Bureau (2007). "Landscape Conditions", Chapter 4 of Current Habitat Conditions in the Habitat Conservation Plan Area. Portland, Oregon: Portland Water Bureau. Retrieved March 9, 2010.
edit