Draft:Thrust Coefficient

• Comment: Wikipedia articles require recent reliable independent secondary sources with in depth coverage of the subjects.
  If decent sources are added to the article, feel free to ping my talk page once you've resubmitted the article for review. Stuartyeates (talk) 21:33, 4 November 2023 (UTC)

---

Thrust coefficient or $c_{F}$ (sometimes $c_{\tau }$) is a dimensionless number that measures the performance of a nozzle in a rocket engine, independent of combustion performance. It is used to compare different nozzle geometries. When combined with characteristic velocity $c^{*}$, a true exhaust velocity $c$ and a specific impulse $I_{sp}$ can be found to characterize the overall efficiency of a rocket engine design.

The thrust coefficient characterizes the supersonic flow in the expansion section downstream of the nozzle throat, in contrast to characteristic velocity which characterizes the subsonic flow in the combustion chamber and contraction section upstream of the throat:.

Physics and Context

Thrust coefficients characterize how well a nozzle will boost the efficiency of a rocket engine by expanding the exhaust gas and dropping its pressure before it meets ambient conditions. A $c_{F}$ of 1 corresponds to zero ambient pressure and no expansion at all; i.e. the nozzle is merely a straight tube exhausting into vacuum. The effective exhaust velocity would then be equal to the characteristic velocity provided by the combustion chamber. Typical thrust coefficients seen in aerospace industry rocket engines vary between about 1.5 and 2.

Industry Examples

Rocket Engine	Thrust Coefficient at Sea Level	Thrust Coefficient in Vacuum	Citation
Rocketdyne F-1	1.59	1.82
Rocketdyne RL10A-1		2.05
Rocketdyne RS-25 / SSME	1.53	1.91
Energomash RD-120		1.95
Energomash RD-170	1.71	1.86
Energomash RD-253	1.65	1.83

Formulas

$c_{F}={\frac {c}{c^{*}}}={\frac {I_{sp}g_{0}}{c^{*}}}={\frac {F}{p_{c}A_{t}}}$

• $c$ is the effective exhaust velocity (m/s)
• $c^{*}$ is the characteristic velocity of the combustion (m/s)
• $I_{sp}$ is specific impulse (s)
• $g_{0}$ is standard gravity (m/s²)

• $F$ is total thrust of the engine (N)
• $p_{c}$ is chamber pressure (Pa)
• $A_{t}$ is the area of the nozzle throat (m²)

Ideal Nozzles

An ideal nozzle has parallel, uniform exit flow; this is achieved when the pressure at the exit plane equals the ambient pressure. In vacuum conditions this means an ideal nozzle is infinitely long. The area ratio can be derived from isentropic flow, also given here:

${\frac {A_{e}}{A_{t}}}=\left({\frac {\gamma -1}{2}}\right)^{1/2}\left({\frac {2}{\gamma +1}}\right)^{\frac {\gamma +1}{2(\gamma -1)}}\left({\frac {p_{a}}{p_{c}}}\right)^{-{\frac {1}{\gamma }}}\left[1-\left({\frac {p_{a}}{p_{c}}}\right)^{\frac {\gamma -1}{\gamma }}\right]^{-{\frac {1}{2}}}$

• $A_{e}$ is the area of the nozzle exit plane (m²)
• $\gamma$ is the ratio of specific heats of the exhaust gas
• $p_{a}$ is the ambient pressure of the surrounding atmosphere/vacuum (Pa).

The ideal thrust coefficient is then:

$c_{F|ideal}={\sqrt {{\frac {2\gamma ^{2}}{\gamma -1}}\left({\frac {2}{\gamma +1}}\right)^{\frac {\gamma +1}{\gamma -1}}\left[1-\left({\frac {p_{e}}{p_{c}}}\right)^{\frac {{\gamma }-1}{\gamma }}\right]}}+{\frac {A_{e}}{A_{t}}}\left({\frac {p_{e}-p_{a}}{p_{c}}}\right)$

• $p_{e}$ is the pressure of the exhaust gas at the exit plane (Pa). In an ideal case this equals $p_{a}$

Corrections

Various inefficiencies in a real nozzle design will reduce the overall thrust coefficient. Three major effects contribute as follows

$c_{F}={\eta _{d}}{\eta }_{t}\left[{\eta }_{f}c_{F|ideal}+(1-{\eta _{f}}){\frac {p_{e}A_{e}}{p_{c}A_{t}}}\right]-{\frac {p_{a}A_{e}}{{p_{c}}A_{t}}}$

• $\eta _{d}$ is the divergence loss efficiency (typically the most dominant inefficiency)
• $\eta _{t}$ is the two-phase flow loss efficiency
• $\eta _{f}$ is the skin friction loss efficiency (typically about 0.99)

Conical Nozzles

${\eta }_{d}=\left({\frac {1+cos{\alpha }}{2}}\right)$

• $\alpha$ is the half-angle of the conical nozzle (rad)

Annular Nozzles

These nozzles are typically found in aerospike engines or in jet engines.

${\eta }_{d}={\frac {{\frac {1}{2}}\left(\sin {\alpha }+\sin {\beta }\right)^{2}}{\left(\alpha +\beta \right)\sin {\beta }+\cos {\beta }-\cos {\alpha }}}$

• $\alpha$ is the half-angle of the outer wall of the nozzle (rad)
• $\beta$ is the (positive) half-angle of the inner wall of the plug inside the nozzle (rad)

Generalized Contour Nozzles

There are no simple relations for divergence inefficiency for a more general nozzle contour, such as a bell nozzle. Instead the thrust coefficient must be integrated directly, assuming pressure variation across the nozzle exit plane has already been found:

${c_{F}}=\int _{0}^{R_{e}}\left({\frac {p}{p_{c}A_{t}}}+{\frac {\rho V^{2}\cos {\theta }}{p_{c}{A_{t}}}}\right)2\pi rdr-{\frac {p_{a}}{p_{c}}}{\frac {A_{e}}{A_{t}}}$

• $R_{e}$ is the inner radius of the nozzle at the exit plane (m). In an annular nozzle it is the distance between the outer wall and the plug at the exit plane.
• $r$ is the distance from the central axis to the point of interest (m). The relationship assumes radial symmetry of all properties.
• $p$ is the pressure of the exhaust gas at the exit plane at a given $r$ (Pa).
• $\rho$ is the density of the exhaust gas at the exit plane at a given $r$ (kg/m³).
• $V$ is the speed of the exhaust gas at the exit plane at a given $r$ (m/s).
• $\theta$ is the angular direction of the exhaust gas velocity at the exit plane at a given $r$ (rad).