Corliss Steam Engine (Pawnee, Oklahoma)

The Corliss Steam Engine on the Pawnee County Fairgrounds in Pawnee, Oklahoma is a Corliss steam engine that was built c. 1912.[2][3] It and a twin sister engine were originally built for the Blackwell Zinc Co., of Blackwell, Oklahoma.[4] It powered most of the electricity-powered machinery in the 1000-employee zinc smelting plant, until the plant closed in 1973.[2]

Corliss Steam Engine
Corliss Steam Engine (Pawnee, Oklahoma) is located in Oklahoma
Corliss Steam Engine (Pawnee, Oklahoma)
Corliss Steam Engine (Pawnee, Oklahoma) is located in the United States
Corliss Steam Engine (Pawnee, Oklahoma)
LocationPawnee County Fairgrounds, Pawnee, Oklahoma
Coordinates36°20′48″N 96°47′39″W / 36.34667°N 96.79417°W / 36.34667; -96.79417
Built1912
ArchitectCorliss, G.H.
Architectural styleSteam Engine
NRHP reference No.79002016[1]
Added to NRHPMay 7, 1979

It was later donated to the Oklahoma Steam Thresher Association, disassembled, and restored in its own building on the Pawnee County Fairgrounds.[2] One source on the web has 6 photos of the engine displayed there.[4]

NRHP listing

edit

It was listed on the National Register of Historic Places on May 7, 1979, with NRIS number 79002016.[1] The application states that the significance of this engine is:"...(1) its position of pre-eminence in the history of American technology, (2) its role in the Industrial development of Oklahoma, and (3) its survival as one of the country's few remaining functional Corliss Engines."[2]

History of Corliss steam engines

edit

A steam engine fitted with rotary valves and having variable valve timing was invented by and named for an American Engineer, George Henry Corliss, in 1849. Engines fitted with Corliss valve gear offered the best thermal efficiency of any type of stationary steam engine until the refinement of the uniflow steam engine and steam turbine in the 20th century. Corliss' engines were generally about 30 percent more fuel efficient than conventional steam engines with fixed cutoff.[5] This increased efficiency made steam power more economical than water power, allowing industrial development away from millponds.[6]

Description of the Pawnee engine

edit

The Corliss engine now displayed in Pawnee was part of an Allis-Chalmers steam electric generating plant. It is a large piece of machinery in every respect, being 25 feet (7.6 m) long by 18 feet (5.5 m) wide and weighing 110 tons. The flywheel is 12 feet (3.7 m) in diameter and weighs 10 tons. The cylinder has a 20 inches (51 cm) bore with a 36 inches (91 cm) stroke.[2]

This engine uses separate valves for the steam and the exhaust to allow natural drainage. It also has a Reynolds trip gear, which uses a spring to cause the engagement of the hook with the catch plate. Sudden unequal pressure buildups were prevented by having a space between the outer surface of the boiler and the inner surface of the steam regulator.[2]

At the time of the NRHP application, the system was assessed in good operating condition.[2]

References

edit
  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. ^ a b c d e f g Diane Everman (September 1978). "National Register of Historic Places Inventory/Nomination: Corliss Steam Engine". National Park Service. Archived from the original (PDF) on September 20, 2016. Retrieved September 9, 2016.
  3. ^ "Accompanying photo". National Park Service. Archived from the original (PDF) on September 20, 2016. Retrieved September 9, 2016.
  4. ^ a b "Corliss Steam Engine" landmark hunter.comMay 2007. Accessed November 19, 2016. Archived April 28, 2015, at the Wayback Machine
  5. ^ Rosenberg and Trajtenberg, A General Purpose Technology at Work, The Journal of Economic History, 64, 1 (March 2004) page 75
  6. ^ Diana Muir, Reflections in Bullough's Pond, University Press of New England, p. 173.