The Commodore 2031 and Commodore 4031 are single-unit 5¼" floppy disk drives for Commodore International computers. They use a similar steel case form to the Commodore 9060/9090 hard disk drives, and use the parallel IEEE-488 interface common to Commodore PET/CBM computers. Essentially, both models are a single-drive version of the Commodore 2040/4040 units.

Commodore 2031
Commodore 2031 disk drive
ManufacturerCommodore Business Machines, Inc.
TypeFloppy disk drive
Media5¼" floppy disk SS SD[1]
Operating systemCBM DOS 2.6
CPUMOS 6502 @ 1 MHz[2]
Memory
High profile model: 2 KB SRAM (4x 2114), 16 KB ROM (2x 2364)[2]

Low profile model: 2 KB SRAM (2016), 16 KB ROM (2x 2364)[2]

Storage170 KB per disk[1]
ConnectivityParallel IEEE-488[1]
Backward
compatibility
Commodore PET/CBM, 4000-series, 8000-series, B128
RelatedCommodore 2040 & 4040

The Commodore 2031LP is functionally the same as the 2031, but used the lower-profile tan case of the second version of the Commodore 1540 floppy disk drive intended for home computer use.

These drive models use a single-density, single-side floppy data storage format similar to that used by the Commodore 1540 & Commodore 1541 drives, but with a slightly different data marker indicating which model originally formatted the disk. The low-level disk format is similar enough to allow reading between models, but different enough that one series of drive models cannot reliably write to disks formatted with one of the other model series. A difference of one extra 'header' byte is what causes this write incompatibility.

References

edit
  1. ^ a b c "Commodore 2031, 4031, and 2031LP drives". Retrieved 2020-04-22.
  2. ^ a b c "Service Manual 2031 Disk Drive High And Low Profile Models Dec. 1985 PN-314011-01" (PDF). Retrieved 2020-04-22.

Further reading

edit