This article needs additional citations for verification. (October 2015) |
Coal-water slurry fuel is a mixture of fine coal particles suspended in water. Such slurries are used to transport coal. Typically, the slurry is dried prior to combustion.[1] In principle but not in practice, coal slurries can be used to power boilers, gas turbines, diesel engines, and heating and power stations.
Characteristics
editA coal-water slurry fuel is defined by a number of factors including its viscosity, particle size, rate of sedimentation, ignition temperature (800–850 °C [1,470–1,560 °F]), combustion temperature (950–1,150 °C [1,740–2,100 °F]), ash content and calorific value (3,700–4,700 kilocalories per kilogram [15.5–19.7 MJ/kg]).
When coal-water slurry fuel combusts, over ninety-nine percent of its carbon content is consumed.[citation needed] Coal-water slurry fuel is fire-proof and explosion-proof.[citation needed] Ash content of less than ten percent is desirable for boilers. For diesel engines, there is no limit.
Parameters | І GRADE | ІІ GRADE | ІІІ GRADE |
---|---|---|---|
Coal content, % | ≥ 65 | 63–65 | 60–63 |
Viscosity[clarification needed] | ≤ 1200 | ||
Minimum energy yield (kcal/kg) | ≥ 4700 | 4420–4660 | 4000–4420 |
Ash content, % | ≤ 6 | 6–8 | 8–10 |
Sulfur content, % | ≤ 0.35 | 0.35–0.65 | 0.65–0.80 |
Ash softening temperature[clarification needed] | ≤ 1250 | ||
Particles of more than 300 μm, % | ≤ 0.05 | 0.05–0.20 | 0.20–0.80# |
Particles up to 75 μm, % | ≥ 75.0 | ||
Volatile content, % | > 30 | 20–30 | ≤ 20 |
Production
editThe production of coal-water slurry fuel involves the crushing of coal or coal sludge to particles between 10 and 65 micrometers diameter (standard crushers can be used); wet milling and homogenisation (with additives as required). The resulting product (coal slurry) is then prepared for intermediate storage or transport.[2]
Large particle coal-water slurry fuel can be used to produce steam in boilers. Smaller (under 80 micrometer) particle coal-water slurry fuel can be used in diesel engines with or without co-fuels. For example, low speed marine or modular power plant diesels can operate on pure coal-water slurry fuel whereas medium speed diesels such as locomotive engines may need diesel as a co-fuel which will act as an ignition source. Very small (5 to 10 micrometer) particle coal-water slurry fuel has been trialled in combined cycle gas turbine power plants. Smaller sized particles are more versatile in use but are more difficult to produce.
Prototypes
editConverting coal into a liquid form may simplify the delivery and dispensing of the fuel. It may be a cost-efficient alternative to oil and natural gas. Separating non-carbonaceous material before making the slurry may reduce the production of ash to two percent.
Development
editType of coal | Possibility |
---|---|
Brown coal (lignite) | possible, tested and confirmed |
Flame coal (V=40–45%) | well developed[4] |
Gas flame coal, gas coal (V=28–40%) | well developed |
Fat coal – anthracite (V=7–28%) | possible, tested and confirmed |
Belovo Novosibirsk project
editIn the late 1950s, the Soviet Union looked for new methods of using coal sludge for power generation. Coal-water slurry fuel was made in a ball mill which pulverised the coal or coal sludge. This was done near a coal mine in Belovo, Siberia. The coal-water slurry fuel was transported through a pipeline to Novosibirskaya TEC-5, Novosibirsk, a distance of 262 km (163 mi). The pipeline had three intermediate pumping stations. The Belovo Novosibirsk project used coal-water slurry fuel in steam boilers at a rate of 1340 tonnes per hour.[5] There was a further project at Belovo Novosibirsk between 1989 and 1993 and development of coal-water slurry fuel technology for district heating stations and power stations.[6] In 2004, a coal-water slurry fuel production plant was opened at Enskiy village, Murmansk.[7]
Austria
editIn 2012, the Austrian company, Effective Energy Technology GmbH (EET) built facilities for production and combustion of coal-water slurry fuel in Europe. Examples of the technology in practice are hydroshock type wet-milling devices and standard water boilers equipped with swirl pre-chamber and coal-water slurry nozzle.,[8][9][10] developed by group of companies EET.
Ukraine
editVerkhovna Rada requested China Development Bank credit for the implementation of coal-water slurry fuel technology.[11] Ukteplokom, a state owned entity, commenced operation.[12][13]
See also
editReferences
edit- ^ Hower, James (2016). "Coal". Kirk-Othmer Encyclopedia of Chemical Technology. pp. 1–63. doi:10.1002/0471238961.0315011222151818.a01.pub3. ISBN 978-0-471-48494-3.
- ^ "Water-coal slurry as an alternative to natural gas and heavy fuel oil"
- ^ Горение ВУТ в котле ДКВР-6,5-13. Видео 1. Archived from the original on 2021-12-15.
- ^ Production of CWS, video[dead link]
- ^ "Belovo-Novosibirsk project." Archived 2016-03-05 at the Wayback Machine Vodougol.ru archived 5 February 2015.
- ^ "ЖИДКИЙ УГОЛЬ; Блог о Водоугольном Топливе." Archived July 12, 2009, at the Wayback Machine Liquidcoal.ru |Accessed 30 March 2013 in Russian. Dead link.
- ^ "Водоугольное топливо в пос. Ёнский" Archived May 19, 2014, at the Wayback Machine Vodougol.ru
- ^ "Coal water slurry production unit" cwstech.at in English.
- ^ "CWS production and combustion process"
- ^ "CWS swirl combustion technique"
- ^ "Китай даст Украине денег на замену российского газа углем". Archived from the original on 2014-07-14. Retrieved 2014-06-10. Forum.for-ua.com. Dead link.
- ^ "Energy of Nature" ukrproject.gov.ua.
- ^ Biletsky V. et al "Fundamentals of highly loaded coal water slurries." CRC Press, Taylor and Francis Group, London, UK. A Balkema Book 2013 pp. 105–14.