Bavarian C III (Ostbahn)

The Bavarian Class C, later C III, waw a German steam locomotive with the Bavarian Eastern Railway (Bayrischen Ostbahn) and Deutsche Reichsbahn.

Bavarian C III
DRG Class 53.78
Type and origin
BuilderMaffei
Build date1867–1875
Total produced55
Specifications
Configuration:
 • Whyte0-6-0
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.1,220/1,255/1,274 mm
Length:
 • Over beams14,115 mm (46 ft 3+34 in)
Adhesive weight24.0/27.5 m2[clarification needed]
Service weight24.0/27.5 m2[clarification needed]
Water cap.9.0 or 9.5 m3 (2,000 or 2,100 imp gal; 2,400 or 2,500 US gal)
Boiler pressure8–10 kgf/cm2 (785–981 kPa; 114–142 lbf/in2)
Heating surface:
 • Firebox1.05 or 1.10 m2 (11.3 or 11.8 sq ft)
 • Evaporative72.50 or 66.50 m2 (780.4 or 715.8 sq ft)
Cylinders2
Cylinder size349 or 356 mm (13+34 or 14 in)
Piston stroke508 mm (20 in)
Valve gearAllan
Performance figures
Maximum speed45 km/h (28 mph)
Career
Numbers
  • BOB: C13 to C64
  • K.Bay.Sts.E: 1124–1189
  • DRG: 53 7835 – 53 7864
Retiredup to 1925

From 1867 a total of 152 examples of this engine were built in Bavaria for the Ostbahn. The five series differed in their dimensions from one another. They had larger grate and heating areas than their predecessor engines, the Class C II. In addition the drive was to the middle axle, so that shorter connecting rods could be used. The locomotives had an Allan valve gear and injectors.

Retirement began after 1905. In 1920, 49 machines were still left. The Reichsbahn recorded 35 of the 38 remaining engines in 1923 and gave them the numbers 53 7835 to 53 7864. However, by 1925 they were no longer on active duty. Three engines went as reparations to the Belgian State Railways.

The locomotives were equipped with 3 T 9 and 3 T 9.5 tenders.

See also

edit

References

edit
  • Vandenberghen, J. (1989). La guerre 1914 - 1918 et les locomotives "Armistice", 3. Description des locomotives bavaroises, saxonnes, badoises, mecklebourgeoises, oldenbourgeoises (PDF) (in French). Brussels: SNCB. p. 22.