BL 12-inch railway howitzer

The British Ordnance BL 12 inch howitzer on truck, railway, a type of railway gun, was developed following the success of the 9.2-inch siege howitzer. It was similar but unrelated to the 12-inch siege howitzers Mk II and IV.

Ordnance BL 12-inch Howitzer Mk I, III, V on truck, railway
Mk. I "Hilda" in action, Ypres, 7 November 1917
TypeRailway howitzer
Place of originUnited Kingdom
Service history
In service1916–1940
Used byUnited Kingdom
WarsFirst World War
Production history
DesignerElswick Ordnance Company
ManufacturerElswick Ordnance Company
No. built81
VariantsMk I, III, V[note 1]
Specifications
Barrel lengthMk I: 12 ft (3.7 m)
Mk III & V: 17 ft 3 in (5.26 m)[1]

ShellHE; 750 lb (340 kg)
Calibre12-inch (305 mm)
ElevationMk I & III: 40° - 65°
Mk V: 20° - 65°
TraverseMk I & III: 20° L & R
Mk V: 120° L & R[1]
Muzzle velocityMk I: 1,175 ft/s (358 m/s)
Mk III & V: 1,468 ft/s (447 m/s)[1]
Effective firing rangeMk I: 11,132 yd (10,179 m)
Mk III: 15,000 yd (14,000 m)
Mk V: 14,350 yd (13,120 m)
Filling weight83lb 3oz (37.96 kg) Amatol

Design and development

edit

Mark I

edit

Mk I was introduced from March 1916. It is identified by its short barrel and recuperator above the barrel.

Mark III

edit
 
Mk III at Wareham, Dorset, 26 February 1941

The longer-barrelled Mk III soon followed, with a heavier breech to balance the gun. It retained the recuperator above the barrel.

Mark V

edit
 
One Mk V (foreground) and two Mk IIIs, Catterick UK, 12 December 1940

Mk V, dating from July 1917, moved the recoil buffer and recuperator into a single housing below the barrel, which was common for all new British artillery developed during World War I. It also had a lighter breech with the gun balanced by the redesigned recoil system and altered gun positioning on the cradle.[2] Mk V also relocated the loading platform from the railway wagon to the revolving gun mounting, which now allowed 120° of traverse, and by overhanging the opposite side provided crew access when the gun fired to the side (90° traverse) and also helped to balance it.[2]

Combat service

edit
 
Mk V in action at Soissons, France, 19 May 1918

All 3 versions served on the Western Front in World War I, usually in 2-gun batteries, operated by the Royal Garrison Artillery.

Mk III and MK V were deployed for the home defence of Great Britain in World War II.

Ammunition

edit

See also

edit

Notes

edit
  1. ^ Mk I = Mark 1, Mk III = Mark 3, Mk V = Mark 5. Britain used Roman numerals to denote Marks (i.e. models) of ordnance until after World War II. Hence this article covers the first, third and fifth models of British 12-inch howitzers. Mks II and IV were the unrelated BL 12-inch siege howitzer.

References

edit
  1. ^ a b c Hogg & Thurston 1972, page 179, 183, 187
  2. ^ a b Hogg & Thurston 1972, page 186

Bibliography

edit
  • Dale Clarke, British Artillery 1914-1919. Heavy Artillery. Osprey Publishing, Oxford UK, 2005 ISBN 1-84176-788-3
  • I.V. Hogg & L.F. Thurston, British Artillery Weapons & Ammunition 1914–1918. London: Ian Allan, 1972.

Further reading

edit
edit