3,4-Ethylenedioxythiophene

3,4-Ethylenedioxythiophene
Names
	Preferred IUPAC name 2,3-Dihydrothieno[3,4-b][1,4]dioxine
Identifiers
CAS Number	126213-50-1;
3D model (JSmol)	Interactive image;
Beilstein Reference	7126466
ChemSpider	3622202;
ECHA InfoCard	100.122.178
EC Number	603-128-0;
PubChem CID	4421864;
UNII	8SEC7Q2K7G ;
CompTox Dashboard (EPA)	DTXSID40888925 ;
	InChI InChI=1S/C6H6O2S/c1-2-8-6-4-9-3-5(6)7-1/h3-4H,1-2H2 Key: GKWLILHTTGWKLQ-UHFFFAOYSA-N;
	SMILES C1COC2=CSC=C2O1;
Properties
Chemical formula	C6H6O2S
Molar mass	142.17 g·mol−1
Appearance	colorless liquid
Density	1.34 g/cm3
Melting point	10.5 °C (50.9 °F; 283.6 K)
Boiling point	225 °C (437 °F; 498 K)
Solubility in water	2.1 g/L
Viscosity	11 mPa·s
Hazards
	GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H302, H311, H312, H319, H412
Precautionary statements	P262, P264, P264+P265, P270, P273, P280, P301+P317, P302+P352, P305+P351+P338, P316, P317, P321, P330, P337+P317, P361+P364, P362+P364, P405, P501
Flash point	104 °C (219 °F; 377 K)
Autoignition; temperature	360 °C (680 °F; 633 K)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Infobox references

3,4-Ethylenedioxythiophene (EDOT) is an organosulfur compound with the formula C₂H₄O₂C₄H₂S. The molecule consists of thiophene, substituted at the 3 and 4 positions with an ethylene glycolyl unit. It is a colorless viscous liquid.^[3]

EDOT is the precursor to the polymer PEDOT, which is found in electrochromic displays, photovoltaics, electroluminescent displays, printed wiring, and sensors.^[4]^[5]

Synthesis and polymerization edit

The original synthesis proceeded via the diester of 3,4-dihydroxythiophene-2,5-dicarboxylate.

One synthesis of EDOT

EDOT is often prepared from C4 precursors such as butanediol and butadiene via routes that produce the thiophene and dioxane rings in separate steps. Representative is the reaction of 2,3-butanedione, trimethyl orthoformate, and ethylene glycol to form the dioxane. Sulfidization with elemental sulfur gives the bicyclic target.^[6]

EDOT is converted into the conducting polymer PEDOT by oxidation. The mechanism for this conversion begins with production of the radical cation [EDOT]⁺, which attacks a neutral EDOT molecule followed by deprotonation. Further similar steps result in the dehydropolymerization. The idealized conversion using peroxydisulfate is shown

n C₂H₄O₂C₄H₂S + n (OSO₃)₂²⁻ → [C₂H₄O₂C₄S]_n + 2n HOSO₃⁻

For commercial purposes, the polymerization is conducted in the presence of polystyrenesulfonate.^[5]

References edit

^ ^a ^b ^c ^d ^e ^f ^g Elschner, Andreas; Kirchmeyer, Stephan; Lovenich, Wilfried (2010). PEDOT: Principles and Applications of an Intrinsically Conductive Polymer. CRC Press. p. 51. ISBN 978-1-4200-6912-9.
^ "2,3-Dihydrothieno[3,4-b][1,4]dioxine". pubchem.ncbi.nlm.nih.gov.
^ Jonas, F.; Schrader, L. (1991). "Conductive Modifications of Polymers with Polypyrroles and Polythiophenes". Synthetic Metals. 41 (3): 831–836. doi:10.1016/0379-6779(91)91506-6.
^ Groenendaal, L. B.; Jonas, F.; Freitag, D.; Pielartzik, H.; Reynolds, J. R. (2000). "Poly(3,4-Ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future". Adv. Mater. 12 (7): 481–494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C.
^ ^a ^b Kirchmeyer, S.; Reuter, K. (2005). "Scientific Importance, Properties and Growing Applications of Poly(3,4-Ethylenedioxythiophene)". J. Mater. Chem. 15 (21): 2077–2088. doi:10.1039/b417803n.
^ Hachiya, I.; Yamamoto, T.; Inagaki, T.; et al. (2014). "Two-Step Synthesis of 3,4-Ethylenedioxythiophene (EDOT) from 2,3-Butanedione". Heterocycles. 88: 607–612. doi:10.3987/COM-13-S(S)8 (inactive 2024-02-17).{{cite journal}}: CS1 maint: DOI inactive as of February 2024 (link)

[b1-1] ^ ^a ^b ^c ^d ^e ^f ^g Elschner, Andreas; Kirchmeyer, Stephan; Lovenich, Wilfried (2010). PEDOT: Principles and Applications of an Intrinsically Conductive Polymer. CRC Press. p. 51. ISBN 978-1-4200-6912-9.

[2] "2,3-Dihydrothieno[3,4-b][1,4]dioxine". pubchem.ncbi.nlm.nih.gov.

[3] Jonas, F.; Schrader, L. (1991). "Conductive Modifications of Polymers with Polypyrroles and Polythiophenes". Synthetic Metals. 41 (3): 831–836. doi:10.1016/0379-6779(91)91506-6.

[4] Groenendaal, L. B.; Jonas, F.; Freitag, D.; Pielartzik, H.; Reynolds, J. R. (2000). "Poly(3,4-Ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future". Adv. Mater. 12 (7): 481–494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C.

[JMC-5] Kirchmeyer, S.; Reuter, K. (2005). "Scientific Importance, Properties and Growing Applications of Poly(3,4-Ethylenedioxythiophene)". J. Mater. Chem. 15 (21): 2077–2088. doi:10.1039/b417803n.

[6] Hachiya, I.; Yamamoto, T.; Inagaki, T.; et al. (2014). "Two-Step Synthesis of 3,4-Ethylenedioxythiophene (EDOT) from 2,3-Butanedione". Heterocycles. 88: 607–612. doi:10.3987/COM-13-S(S)8 (inactive 2024-02-17).{{cite journal}}: CS1 maint: DOI inactive as of February 2024 (link)

[3]

[1]

[2]

[4]

[5]

[6]