USS Suncook (1865)

(Redirected from USS Spitfire (1869))

USS Suncook – a single-turreted, twin-screw monitor – was built by the Globe Works, South Boston, and delivered to the government at the Boston Navy Yard on 8 July 1865.

History
United States
NameUSS Suncook
OrderedApril 1863
BuilderGlobe Works, Boston
Acquired8 July 1865
CommissionedNever commissioned
FateBroken up, July 1874
General characteristics
Class and typeCasco-class monitor
Displacement1,175 long tons (1,194 t)
Length225 ft (69 m)
Beam45 ft (14 m)
Draft9 ft (2.7 m)
PropulsionScrew steamer
Speed9 knots (10 mph; 17 km/h)
Complement69 officers and enlisted
Armament2 × 11 in (280 mm) smoothbore Dahlgren guns
Armor
  • Turret: 8 in (200 mm)
  • Pilothouse: 10 in (250 mm)
  • Hull: 3 in (76 mm)
  • Deck: 3 in (76 mm)

Suncook was a Casco-class, light-draft monitor intended for service in the shallow bays, rivers, and inlets of the Confederacy. These warships sacrificed armor plate for a shallow draft and were fitted with a ballast compartment designed to lower them in the water during battle.

Design revisions

edit

Though the original designs for the Casco-class monitors were drawn by John Ericsson, the final revision was created by Chief Engineer Alban C. Stimers following Rear Admiral Samuel F. Du Pont's failed bombardment of Fort Sumter in 1863. By the time that the plans were put before the Monitor Board in New York City, Ericsson and Simers had a poor relationship, and Chief of the Bureau of Construction and Repair John Lenthall had little connection to the board. This resulted in the plans being approved and 20 vessels ordered without serious scrutiny of the new design. $14 million US was allocated for the construction of these vessels. It was discovered that Stimers had failed to compensate for the armor his revisions added to the original plan and this resulted in excessive stress on the wooden hull frames and a freeboard of only 3 inches. Stimers was removed from the control of the project and Ericsson was called in to undo the damage. He was forced to raise the hulls of the monitors under construction by 22 inches to make them seaworthy.

Fate

edit

As a result, the Suncook was laid up at the Philadelphia Navy Yard from 1866 to 1874. Her name was changed to USS Spitfire on 15 June 1869, but she resumed the name Suncook on 10 August 1869. The monitor was broken up at Philadelphia in July 1874.

References

edit

  This article incorporates text from the public domain Dictionary of American Naval Fighting Ships. The entry can be found here.