Trimethylaluminium

(Redirected from Trimethyl aluminum)

Trimethylaluminium is one of the simplest examples of an organoaluminium compound. Despite its name it has the formula Al2(CH3)6 (abbreviated as Al2Me6 or TMA), as it exists as a dimer. This colorless liquid is pyrophoric. It is an industrially important compound, closely related to triethylaluminium.[3][4]

Trimethylaluminium
Names
IUPAC name
Trimethylalumane
Other names
Trimethylaluminum; aluminium trimethyl; aluminum trimethyl
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.000.776 Edit this at Wikidata
UNII
  • InChI=1S/3CH3.Al/h3*1H3; checkY
    Key: JLTRXTDYQLMHGR-UHFFFAOYSA-N checkY
  • InChI=1/3CH3.Al/h3*1H3;/rC3H9Al/c1-4(2)3/h1-3H3
    Key: JLTRXTDYQLMHGR-MZZUXTGEAJ
Properties
C6H18Al2
Molar mass 144.17 g/mol
72.09 g/mol (C3H9Al)
Appearance Colorless liquid
Density 0.752 g/cm3
Melting point 15 °C (59 °F; 288 K)
Boiling point 125–130 °C (257–266 °F; 398–403 K)[1][2]
Reacts
Vapor pressure
  • 1.2 kPa (20 °C)
  • 9.24 kPa (60 °C)[1]
Viscosity
  • 1.12 cP (20 °C)
  • 0.9 cP (30 °C)
Thermochemistry
155.6 J/mol·K[2]
209.4 J/mol·K[2]
−136.4 kJ/mol[2]
−9.9 kJ/mol[2]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Pyrophoric
GHS labelling:
GHS02: FlammableGHS05: Corrosive[1]
Danger
H250, H260, H314[1]
P222, P223, P231+P232, P280, P370+P378, P422[1]
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
3
4
3
Flash point −17.0 °C (1.4 °F; 256.1 K)[1]
Related compounds
Related compounds
Triethylaluminium
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Structure and bonding

edit

The structure and bonding in Al2R6 and diborane are analogous (R = alkyl). In Al2Me6, the Al-C(terminal) and Al-C(bridging) distances are 1.97 and 2.14 Å, respectively. The Al center is tetrahedral.[5] The carbon atoms of the bridging methyl groups are each surrounded by five neighbors: three hydrogen atoms and two aluminium atoms. The methyl groups interchange readily intramolecularly. At higher temperatures, the dimer cracks into monomeric AlMe3.[6]

Synthesis

edit

TMA is prepared via a two-step process that can be summarized as follows:

2 Al + 6 CH3Cl + 6 Na → Al2(CH3)6 + 6 NaCl

Applications

edit

Catalysis

edit

Starting with the invention of Ziegler-Natta catalysis, organoaluminium compounds have a prominent role in the production of polyolefins, such as polyethylene and polypropylene. Methylaluminoxane, which is produced from TMA, is an activator for many transition metal catalysts.

Semiconductor applications

edit

TMA is also used in semiconductor fabrication to deposit thin film, high-k dielectrics such as Al2O3 via the processes of chemical vapor deposition or atomic layer deposition. TMA is the preferred precursor for metalorganic vapour phase epitaxy (MOVPE) of aluminium-containing compound semiconductors, such as AlAs, AlN, AlP, AlSb, AlGaAs, AlInGaAs, AlInGaP, AlGaN, AlInGaN, AlInGaNP, etc. Criteria for TMA quality focus on (a) elemental impurities, (b) oxygenated and organic impurities.

Photovoltaic applications

edit

In deposition processes very similar to semiconductor processing, TMA is used to deposit thin film, low-k (non-absorbing) dielectric layer stacks with Al2O3 via the processes of chemical vapor deposition or atomic layer deposition. The Al2O3 provides excellent surface passivation of p-doped silicon surfaces. The Al2O3 layer is typically the bottom layer with multiple silicon nitride (SixNy) layers for capping.

Reactions

edit
edit

Trimethylaluminium is hydrolyzed readily, even dangerously:

Al2Me6 + 3 H2O → Al2O3 + 6 CH4

Under controlled conditions, the reaction can be stopped to give methylaluminoxane:

AlMe3 + H2O → 1/n [AlMeO]n + 2 CH4

Alcoholysis and aminolysis reactions proceed comparably. For example, dimethylamine gives the dialuminium diamide dimer:[7]

2 AlMe3 + 2 HNMe2 → [AlMe2NMe2]2 + 2 CH4

Reactions with metal chlorides

edit

TMA reacts with many metal halides to install alkyl groups. When combined with gallium trichloride, it gives trimethylgallium.[8] Al2Me6 reacts with aluminium trichloride to give (AlMe2Cl)2.

TMA/metal halide reactions have emerged as reagents in organic synthesis. Tebbe's reagent, which is used for the methylenation of esters and ketones, is prepared from TMA and titanocene dichloride.[9] In combination with 20 to 100 mol % Cp2ZrCl2 (zirconocene dichloride), the (CH3)2Al-CH3 adds "across" alkynes to give vinyl aluminium species that are useful in organic synthesis in a reaction known as carboalumination.[10]

Adducts

edit

As for other "electron-deficient" compounds, trimethylaluminium gives adducts R3N.AlMe3. The Lewis acid properties of AlMe3 have been quantified.[11] The enthalpy data show that AlMe3 is a hard acid and its acid parameters in the ECW model are EA =8.66 and CA = 3.68.

These adducts, e.g. the complex with the tertiary amine DABCO, are safer to handle than TMA itself.[12]

The NASA ATREX mission (Anomalous Transport Rocket Experiment) employed the white smoke that TMA forms on air contact to study the high altitude jet stream.

Synthetic reagent

edit

TMA is a source of methyl nucleophiles, akin to methyl lithium, but less reactive. It reacts with ketones to give, after a hydrolytic workup, tertiary alcohols.

Safety

edit

Trimethylaluminium is pyrophoric, reacting violently with air and water.

References

edit
  1. ^ a b c d e f Sigma-Aldrich Co., Trimethylaluminum. Retrieved on 2014-05-05.
  2. ^ a b c d e "Trimethyl aluminum".
  3. ^ Krause, Michael J.; Orlandi, Frank; Saurage, Alfred T.; Zietz, Joseph R. (2000). "Aluminum Compounds, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a01_543. ISBN 978-3527306732.
  4. ^ C. Elschenbroich (2006). Organometallics. VCH. ISBN 978-3-527-29390-2.
  5. ^ Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5.
  6. ^ Vass, Gábor; Tarczay, György; Magyarfalvi, Gábor; Bödi, András; Szepes, László (2002). "HeI Photoelectron Spectroscopy of Trialkylaluminium and Dialkylaluminium Hydride Compounds and Their Oligomers". Organometallics. 21 (13): 2751–2757. doi:10.1021/om010994h.
  7. ^ Lipton, Michael F.; Basha, Anwer; Weinreb, Steven M. (1979). "Conversion of Esters to Amides with Dimethylaluminium Amides: N,N-Dimethylcyclohexanecarboxamide". Organic Syntheses. 59: 49. doi:10.15227/orgsyn.059.0049.
  8. ^ Gaines, D. F.; Borlin, Jorjan; Fody, E. P. (1974). "Trimethylgallium". Inorganic Syntheses. Vol. 15. pp. 203–207. doi:10.1002/9780470132463.ch45. ISBN 978-0-470-13246-3.
  9. ^ Pine, S. H.; Kim, V.; Lee, V. (1990). "Enol ethers by methylenation of esters: 1-Phenoxy-1-phenylethene and 3,4-dihydro-2-methylene-2H-1-benzopyran". Org. Synth. 69: 72. doi:10.15227/orgsyn.069.0072.
  10. ^ Negishi, E.; Matsushita, H. (1984). "Palladium-Catalyzed Synthesis of 1,4-Dienes by Allylation of Alkenyalane: α-Farnesene [1,3,6,10-Dodecatetraene, 3,7,11-trimethyl-]". Organic Syntheses. 62: 31. doi:10.15227/orgsyn.062.0031.
  11. ^ Henrickson, C. H.; Duffy, D.; Eyman, D. P. (1968). "Lewis acidity of Alanes. Interactions of Trimethylalane with Amines, Ethers, and Phosphines". Inorganic Chemistry. 7 (6): 1047–1051. doi:10.1021/ic50064a001.
  12. ^ Vinogradov, Andrej; Woodward, S. (2010). "Palladium-Catalyzed Cross-Coupling Using an Air-Stable Trimethylaluminium Source. Preparation of Ethyl 4-Methylbenzoate". Organic Syntheses. 87: 104. doi:10.15227/orgsyn.087.0104.
edit