Template:Infobox mountain/doc
 | This is a documentation subpage for Template:Infobox mountain. It may contain usage information, categories and other content that is not part of the original template page. |
 | This template is used on approximately 29,000 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them. |
 | This template uses Lua: |
image (P18) (see uses)- elevation above sea level (P2044) (see uses)
- topographic prominence (P2660) (see uses)
- parent peak (P3137) (see uses)
- topographic isolation (P2659) (see uses)
- part of (P361) (see uses)
- length (P2043) (see uses)
- width (P2049) (see uses)
- area (P2046) (see uses)
- volume as quantity (P2234) (see uses)
Wikidata-enabled
editSimply add {{Infobox mountain}} to the top of an article, and the data will be automatically included from Wikidata. If necessary, these values can be overridden by passing local values to the relevant parameters in the article:
{{Infobox mountain
| name = [local value]
}}
To add data to Wikidata, please see the Parameters section below.
Standard usage
edit| {{{name}}} | |
|---|---|
| {{{other_name}}} | |
| [[File:{{{photo}}}|{{{photo_size}}}|alt={{{photo_alt}}}|upright={{{photo_upright}}}]] {{{photo_caption}}} | |
| Highest point | |
| Peak | {{{highest}}}, {{{highest_location}}} |
| Elevation | {{{elevation}}}{{{elevation_ref}}} {{{elevation_system}}} |
| Prominence | {{{prominence}}}{{{prominence_ref}}} |
| Parent peak | {{{parent_peak}}} |
| Isolation | {{{isolation}}} to {{{isolation_parent}}}{{{isolation_ref}}} |
| Listing | {{{listing}}} |
| Coordinates | {{{coordinates}}}{{{coordinates_ref}}} |
| Dimensions | |
| Length | {{{length}}} {{{length_orientation}}}{{{length_ref}}} |
| Width | {{{width}}} {{{width_orientation}}}{{{width_ref}}} |
| Area | {{{area}}}{{{area_ref}}} |
| Volume | {{{volume}}}{{{volume_ref}}} |
| Naming | |
| Etymology | {{{etymology}}} |
| Nickname | {{{nickname}}} |
| Native name | {{{native_name}}} Error {{native name checker}}: parameter value is malformed (help) |
| English translation | {{{translation}}} |
| Pronunciation | {{{pronunciation}}} |
| Defining authority | {{{authority}}} |
| Geography | |
| Location | {{{location}}} |
| {{{country_type}}} | {{{country}}} |
| {{{state_type}}} | {{{state}}} |
| {{{region_type}}} | {{{region}}} |
| {{{district_type}}} | {{{district}}} |
| {{{part_type}}} | {{{part}}} |
| {{{settlement_type}}} | {{{settlement}}} |
| Range coordinates | {{{range_coordinates}}}{{{range_coordinates_ref}}} |
| Parent range | {{{range}}} |
| Borders on | {{{borders_on}}} |
| OS grid | {{{grid_ref_UK}}}{{{grid_ref_UK_ref}}} |
| OSI/OSNI grid | {{{grid_ref_Ireland}}}{{{grid_ref_Ireland_ref}}} |
| Topo map | {{{topo_maker}}} {{{topo_map}}} |
| Biome | {{{biome}}} |
| Geology | |
| Formed by | {{{formed_by}}} |
| Orogeny | {{{orogeny}}} |
| Age of rock | {{{age}}} |
| Mountain type | {{{type}}} |
| Type of rock | {{{geology}}} |
| Volcanic region | {{{volcanic_region}}} |
| Last eruption | {{{last_eruption}}} |
| Climbing | |
| First ascent | {{{first_ascent}}} |
| Easiest route | {{{easiest_route}}} |
| Normal route | {{{normal_route}}} |
| Access | {{{access}}} |
| {{{embedded}}} | |
| {{{module}}} | |
{{Infobox mountain
| name =
| other_name =
| photo =
| photo_size =
| photo_upright =
| photo_alt =
| photo_caption =
<!-- MAP CODE TBA -->
| map =
| mapframe = yes<!-- see below for more mapframe parameters -->
<!----------------------- HIGHEST POINT -->
| highest =
| highest_location =
| elevation =
| elevation_m =
| elevation_ft =
| elevation_ref =
| elevation_system =
| prominence =
| prominence_m =
| prominence_ft =
| prominence_ref =
| parent_peak =
| isolation =
| isolation_km =
| isolation_mi =
| isolation_parent =
| isolation_ref =
| listing =
| coordinates =
| coordinates_ref =
<!----------------------- DIMENSIONS -->
| length =
| length_km =
| length_mi =
| length_orientation =
| length_ref =
| width =
| width_km =
| width_mi =
| width_orientation =
| width_ref =
| area =
| area_km2 =
| area_mi2 =
| area_ref =
| volume =
| volume_km3 =
| volume_mi3 =
| volume_ref =
<!----------------------- NAMING -->
| etymology =
| nickname =
| native_name = <!-- {{native name}} or {{native name list}} -->
| native_name_lang = <!-- not used by |native_name= -->
| translation =
| pronunciation =
| authority =
<!----------------------- GEOGRAPHY -->
| location = <!-- While location is not deprecated, use of country,state,region,district is preferred -->
| country_type = <!-- For Antarctica, set to Continent -->
| country = <!-- If multiple, use {{enum}} or {{hlist}}. country1 to country18 is deprecated. -->
| state_type =
| state = <!-- If multiple, use {{enum}} or {{hlist}}. state1 to state18 is deprecated. -->
| region_type =
| region = <!-- If multiple, use {{enum}} or {{hlist}}. region1 to region23 is deprecated. -->
| district_type =
| district = <!-- If multiple, use {{enum}} or {{hlist}}. district1 to district18 is deprecated. -->
| part_type =
| part = <!-- If multiple, use {{enum}} or {{hlist}}. part1 to part19 is deprecated. -->
| settlement_type = Use settlement_type= instead of city_type= (deprecated).
| settlement = <!-- If multiple, use {{enum}} or {{hlist}}. settlement1 to settlement18 is deprecated. Use settlement= instead of city= (deprecated). -->
| range_coordinates =
| range_coordinates_ref =
| range =
| borders_on =
| grid_ref_UK =
| grid_ref_UK_ref =
| grid_ref_Ireland =
| grid_ref_Ireland_ref =
| topo_maker =
| topo_map =
| biome =
<!----------------------- GEOLOGY -->
| formed_by =
| orogeny =
| age =
| type =
| geology =
| volcanic_region =
| volcanic_arc =
| volcanic_belt =
| volcanic_field =
| volcanic_arc/belt =
| last_eruption =
<!----------------------- CLIMBING -->
| first_ascent =
| easiest_route =
| normal_route =
| access =
<!----------------------- ATTACHED -->
| embedded =
| module =
}}
Parameters
editLead section
edit| Parameter | Default value | Description |
|---|---|---|
| name | Wikidata label in the local language | Name of the mountain, peak or hill. |
| other_name | Other name for the mountain. See native_name if the name is in a different language.
| |
| photo | Image on Wikidata | Photograph of the mountain. Preferably a distance shot to show most/all of the mountain rather than a view from the summit. |
| photo_size | 280px | The default image width in pixels. |
| photo_upright | ||
| photo_alt | photo_caption |
Alt text for the photo. |
| photo_caption | media legend (P2096) stated on image | Description of the photograph. |
Maps
editThe maps appear in the lead section, at the top, if there is no photo present. However, if there is a photo, they all move to the Geography section automatically.
| Parameter | Default value | Description |
|---|---|---|
| map | The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinates template ({{coord}}) positions a pushpin marker and label on the map automatically. Example see: Mount Everest. For a static image, use |map_image=
| |
| map_image | The file name of a static map image to be displayed. To use a location map, use |map=.
| |
| map_alt | Alt text for the map, primarily for visually impaired readers. See Alt text for maps. | |
| map_caption | Fill out if a map caption is desired. If not specified, location will be used. | |
| map_image_caption | Fill out if a caption for the map image is desired. If not specified, map_caption will be used. | |
| map_relief | If a location map template is specified, this template will attempt to display a relief map if one is available. To force the default map image to display use |map_relief=0.
| |
| map_size | Must be entered as only a number—no need for px. The default value and maximum is 272. | |
| map_width | ||
| relief | ||
| label | ||
| label_position |
Mapframe maps
edit- Basic parameters:
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: Shown (onByDefault) unless one of these parameters has a value:
|map=,|map_image=,|image_map=,|map_relief=,|relief=. - mapframe-caption – Caption for the map. Default: blank (or if
|mapframe-geomask=is set, "Location in geomask's label") - mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a
{{maplink}}template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified - mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
- mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g.
|coord=. Default: coordinates from Wikidata{{Coord|12.34|N|56.78|E}} - mapframe-wikidata – Set to
yesto show shape/line features from the wikidata item, if any, when|coord=is set. Default: yes
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: Shown (onByDefault) unless one of these parameters has a value:
- Customise which features are displayed:
- mapframe-shape – Turn off display of shape feature by setting to
none. Use an inverse shape (geomask) instead of a regular shape by setting toinverse. Default: not specified - mapframe-point – Turn off display of point feature by setting to
none. Force point marker to be displayed by setting toon. Default: not specified - mapframe-line – Turn off display of line feature by setting to
none. Default: not specified - mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g.
P17for country (P17),P131for located in the administrative territorial entity (P131)). Default: not specified - mapframe-switcher – set to
autoorgeomasksorzoomsto enable Template:Switcher-style switching between multiple mapframes. Default: zoomsauto– switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.geomasks– switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameterzooms– switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of3), "zoomed out" is1, and "zoomed midway" is the average
- mapframe-shape – Turn off display of shape feature by setting to
- Other optional parameters:
- mapframe-frame-width or mapframe-width – Frame width. Default: 250
- mapframe-frame-height or mapframe-height – Frame height. Default: 200
- mapframe-shape-fill – Color used to fill shape features. Default: #606060
- mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
- mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
- mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
- mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: mountain
- Can also be set to
blankto override any default marker symbol
- Can also be set to
- mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
- mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
- mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
- mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
- mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
- mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
- mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
- mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
Highest point
edit| Parameter | Default value | Description |
|---|---|---|
| highest | elevation above sea level (P2044) with qualifier name (P2561) | Name of the highest summit of a single mountain or peak. |
| highest_location | elevation above sea level (P2044) with qualifier location (P276) | Location of highest summit. |
| elevation | elevation above sea level (P2044) | Summit elevation, without auto-conversion. You may wish to use {{Convert|xxx|m|ft|abbr=on}}
|
| elevation_m | Summit elevation in metres, with auto-conversion. | |
| elevation_ft | Summit elevation in feet, with auto-conversion. | |
| elevation_ref | N/A | Optional parameter to add a suffix to the elevation parameters (such as a reference).
|
| elevation_system | elevation above sea level (P2044) with qualifier determination method or standard (P459) | The elevation reference system that defines the elevation, e.g., NAVD88 or DE-NHN |
| prominence | topographic prominence (P2660) | Topographic prominence, without auto-conversion. You may wish to use {{Convert|xxx|m|ft|abbr=on}}
|
| prominence_m | Topographic prominence in metres, with auto-conversion. | |
| prominence_ft | Topographic prominence in metres, with auto-conversion. | |
| prominence_ref | N/A | Optional parameter to add a suffix to the prominence parameters (such as a reference).
|
| parent_peak | parent peak (P3137) | |
| isolation | topographic isolation (P2659) | Topographic isolation, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
|
| isolation_km | Topographic isolation in kilometres, with auto-conversion. | |
| isolation_mi | Topographic isolation in miles, with auto-conversion. | |
| isolation_parent | topographic isolation (P2659) with qualifier relative to (P2210) | Name of the landform the summit is isolated from. |
| isolation_ref | N/A | Optional parameter to add a suffix to the isolation parameters (such as a reference).
|
| listing | part of (P361) | Name of a relevant list of mountains that the peak belongs to. See List of mountain lists for examples. |
| coordinates | coordinate location (P625) | Coordinates of the highest point or peak. |
| coordinates_ref | N/A | Optional parameter to add a suffix to the coordinates parameter (such as a reference).
|
Dimensions
edit| Parameter | Default value | Description |
|---|---|---|
| length | length (P2043) | Length of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
|
| length_km | Length in kilometres, with auto-conversion. | |
| length_mi | Length in miles, with auto-conversion. | |
| length_orientation | length (P2043) with qualifier orientation (P7469) as: latitude (Q34027) (for EW) or longitude (Q36477) (for NS) |
Length orientation. |
| length_ref | N/A | Optional parameter to add a suffix to the length parameters (such as a reference).
|
| width | width (P2049) | Width of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km|mi|abbr=on}}
|
| width_km | Length in kilometres, with auto-conversion. | |
| width_mi | Length in miles, with auto-conversion. | |
| width_orientation | width (P2049) with qualifier orientation (P7469) as: latitude (Q34027) (for EW) or longitude (Q36477) (for NS) |
Width orientation. |
| width_ref | N/A | Optional parameter to add a suffix to the width parameters (such as a reference).
|
| area | area (P2046) | Footprint of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km2|mi2|abbr=on}}
|
| area_km2 | Footprint of the mountain or peak in square kilometres, with auto-conversion. | |
| area_mi2 | Footprint of the mountain or peak in square miles, with auto-conversion. | |
| area_ref | N/A | Optional parameter to add a suffix to the area parameters (such as a reference).
|
| volume | volume as quantity (P2234) | Volume of the mountain or peak, without auto-conversion. You may wish to use {{Convert|xxx|km3|mi3|abbr=on}}
|
| volume_km3 | Volume of the mountain or peak in cubic kilometres, with auto-conversion. | |
| volume_mi3 | Volume of the mountain or peak in cubic miles, with auto-conversion. | |
| volume_ref | N/A | Optional parameter to add a suffix to the volume parameters (such as a reference).
|
Naming
edit| Parameter | Default value | Description |
|---|---|---|
| etymology | named after (P138) | Origin of name |
| nickname | nickname (P1449) | |
| native_name | name in native language (P1559) | Name in local language – use {{native name}} or, for multiple names, use {{native name list}} |
| native_name_lang | name in native language (P1559) | ISO 639-2 code of native_name; not used by native_name.
|
| translation | name in native language (P1559) with qualifier literal translation (P2441) | Translation of name to English (if name is not an English name) |
| pronunciation | IPA transcription (P898) | Use an appropriate IPA-xx template, replacing 'xx' with the ISO code for the language. (See {{IPAc-en}} for English.) |
| authority |
Geography
edit| Parameter | Default value | Description |
|---|---|---|
| location | location (P276) | Free-form field to describe the location. |
| country | country (P17) | Country(ies) of the peak or mountain. |
| country_type | Optional parameter to override the default "Country" label. | |
| subdivision1/state | located in the administrative territorial entity (P131) | 1st level subdivision (i.e. states) of the peak or mountain. |
| subdivision1_type/state_type | Optional parameter to override the default "State" label. | |
| subdivision2/region | 2nd level subdivision (i.e. regions) of the peak or mountain. | |
| subdivision2_type/region_type | Optional parameter to override the default "Region" label. | |
| subdivision3/district | 3rd level subdivision (i.e. districts) of the peak or mountain. | |
| subdivision3_type/district_type | Optional parameter to override the default "District" label. | |
| subdivision4/part | 4th level subdivision (i.e. subdivisions) of the peak or mountain. | |
| subdivision4_type/part_type | Optional parameter to override the default "Subdivisions" label. | |
| settlement | Settlement(s) on/around the peak or mountain. | |
| settlement_type | Optional parameter to override the default "Settlement" label. | |
| range_coordinates | ||
| range_coordinates_ref | N/A | Optional parameter to add a suffix to the range_coordinates parameter (such as a reference).
|
| range | mountain range (P4552) | The mountain range (specific subgroup) that the mountain/massif/range. I.e. Bernese Alps, not Alps. Alias is "parent". |
| borders_on/border | has boundary (P4777) | Geographical entities that form the border of the mountain or range |
| grid_ref_UK | OS grid reference (P613) | If the mountain is in Great Britain, the British grid reference. Use grid_ref_UK_ref to add a suffix reference.
|
| grid_ref_Ireland | Irish Grid Reference (P4091) | If the mountain is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. Use grid_ref_Ireland_ref to add a suffix reference.
|
| topo_maker | The publisher of the topographic map that contains the range | |
| topo | The name of the topographic map that contains the range | |
| topo_map | ||
| biome | Biome(s) for range |
Geology
edit| Parameter | Default value | Description |
|---|---|---|
| formed_by | ||
| orogeny | ||
| age | Age of the rock. Geologic time scales may be useful here. Use period, period1 through period5 for multiple values.
| |
| type | ||
| rock | Type of the rock mountain is made from. Use geology, geology1 through geology5, for multiple types.
| |
| volcanic_region | If the mountain is a volcano, the arc, belt or field in which it is situated. | |
| last_eruption | The date of the last eruption if the mountain is of volcanic origin. |
Climbing
edit| Parameter | Default value | Description |
|---|---|---|
| first_ascent | Date of the first recorded ascent. | |
| easiest_route | The easiest route to the summit. Some possibilities include Hike, Scramble or any of the YDS grades. | |
| normal_route | ||
| access |
Advanced uses
edit| Parameter | Default value | Description |
|---|---|---|
| qid | ||
| suppressfields | ||
| fetchwikidata | ||
| onlysourced | ||
| child | ||
| embedded | ||
| module |
Tracking categories
edit- Category:Wikidata value to be checked for Infobox mountain (148)
- Category:Pages using infobox mountain with multiple parameters (0)
- Category:Pages using infobox mountain with unknown parameters (0)
- Category:Pages using infobox mountain with language parameter (1,341)
- Category:Pages using infobox mountain with plural labels and no data (0)
- Category:Pages using infobox mountain with deprecated parameters (14)
TemplateData
editClick the [show] link to the right to display the TemplateData
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox mountain in articles based on its TemplateData.
TemplateData for Infobox mountain This template is used to create an infobox for an article about a mountain.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Microformat
editThe HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
editIf the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
edithCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
editWhen giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.