Talk:Flue-gas desulfurization

(Redirected from Talk:Flue gas desulfurization)
Latest comment: 2 years ago by Eric Lotze in topic Mention of Flash Dryer Absorber (FDA) Technology

Merged

edit

It seems to me that two articles with almost identical titles should be merged. mbeychok 01:34, 13 March 2006 (UTC)Reply

Since the merging was not done and since the contents of both articles were word-for-word identical, I merged them. - mbeychok 07:25, 27 March 2006 (UTC)Reply

Problems with this article

edit

As one who has worked in the field of designing flue gas desulfurization units, this article had two problem areas:

(1) The article included a discussion about some of the sulfur in oil or coal fired power plants being converted to gaseous, hydrogen sulfide under certain conditions. That may or may not be true theoretically .. I don't know. But what I do know is that if it happens in real world power plants, it is a well-hidden secret. In my 40 year career as a chemical engineering process designer, I have never heard of oil and coal fired power plant flue gases containing hydrogen sulfide. I therefore deleted that part of the article.

With the newer generation of combined coal gasification and power generation, the synthesis gas produced by the coal gasification will indeed contain hydrogen sulfide ... and such combined plants will include facilities for removal of the hydrogen sulfide. However, such combined plants deserves their own article and I might add that the field of such combined plants is still in its infancy.

(2) Equations 4 and 5 in the "SO2 Chemistry" section are practically unreadable in their present form. If the author of that section will contact me on my User talk:mbeychok page and tell me where he found those equation or, better yet, fax me a copy, I will endeaver to re-do them and make them readable.
- mbeychok 07:25, 27 March 2006 (UTC)Reply

I have just finished an extensive re-write of most of this article. Any comments? - mbeychok 07:45, 8 April 2006 (UTC)Reply

Yes, here is a comment. By removing the electron beam method rather than just adding the scrubbing using basic matter you reduced the amount of information in wikipedia, I think you should have added rather than replaced. I have returned the electron beam material in a slightly altered state. It is important as the chemistry used is very different and rather than making CaSO4/CaSO3 it forms a very different product (NH4)2SO4.Cadmium 00:09, 16 April 2006 (UTC)Reply
Cadmium, the IAEA you referenced was about a demonstration plant in Poland that was under construction in Poland in 1995. That was 10 years ago. Do you have any formation on how many power plants (and their size in megawatts) have actually been built and successfully used the electron beam technology in the 10 years since that demonstration plant? I think such information would be germane as to whether it should remain in the article.
It has been my experience that there have been a great many new desulfurization technologies proposed in the past 20 or so years and many of them progressed to the demonstration stage ... but never gained commercial acceptance. That was my reason for removing the electron beam section. "Proving" that a new technology is economically competitive on paper is far different than proving it in the marketplace. If we included all of the proposed techniques, laboratory research, pilot plant and demonstration plant projects ... we would have quite a lengthy list to write about. I have no objection to leaving the description in the article, but I do think it would be most useful if you could provide information as to how many successful, commercial size plants have been built.

This article is about Flue Gas Desulfurization and not about scrubbers for other purposes

edit

Cadmium, I deleted the section you added about scrubbing in other industries because that should be a completely separate article or multiple articles. Removing hydrogen from sewage gases is not Flue Gas Desulfurization. Aqueous solutions of monoethanolamine and diethanolamine have been used for over 50 years to remove acid gases such as hydrogen sulfide and carbon dioxide from raw natural gas and from petroleum refinery gases. Almost every petroleum refinery in the world has an amine scrubbing unit for that purpose. There are many other uses of scrubbing in many different industries for removing many different chemicals from many different gases. Such processes are distinctly different than removing sulfur dioxide from combustion flue gases ... and they deserve an article of their own. I don't think we should turn this article into a compilation of the chemistry involved in every conceivable type of scrubber.

By the way, I would appreciate confirmation that you received the email I sent you in regard to the information you wanted. - mbeychok 23:33, 18 April 2006 (UTC)Reply

Alternate methods

edit

I moved the mention of a different method from the opening paragraph. They really should not be in the introduction at all. Think about moving them either to a section at the end or to the "see also" section. --Blainster 02:49, 26 June 2006 (UTC)Reply

Will do sometime tomorrow. - mbeychok 07:36, 26 June 2006 (UTC)Reply

Ash Disambiguation

edit

This request is because I assume that ash is refering to either Fly ash or bottom ash. Thanks! ----Knulclunk 05:37, 26 January 2007 (UTC)Reply

Knulclunk, I believe that I have addressed your concern by linking the word ash in this article to ash which defines the total ash content of coal (both fly ash and bottom ash). - mbeychok 00:57, 30 January 2007 (UTC)Reply

U.S. spellings versus British spellings

edit

Wikipedia policy regarding words that have alternative spellings is that the spelling used in the earliest chronological introduction of such words in an article shall be used in that article from then on. See Wikipedia:Manual of Style#National varieties of English.

Since the originators of this article used U.S. English spellings rather than British English spellings when choosing to use the words desulfurization, sulfur dioxide and sulfur in creating this article means that U.S. English spellings are always to be retained in this article. This does not mean that either spelling is "right" or "wrong". It simply means that it is Wikipedia policy. - mbeychok 21:00, 5 June 2007 (UTC)Reply

Removed "WikiProjectPhysics" tag

edit

I fail to to see how this article belongs to WikiProject Physics or how anyone could think so ... unless one believes that every technical aricle is related to physics. Therefore, I removed the tag. - mbeychok (talk) 01:46, 16 January 2008 (UTC)Reply

Query regarding facts and statistics

edit

The facts and statistics section states the information was obtained from a US EPA published fact sheet. This fact sheet appears to make no reference to Scottish Power's Longannet power station. The FGD process used at Longannet is that of SO2 removal by way of absorption in seawater inside a packed column. This process does not appear to be discussed in the article. The plant installation was undertaken by a consortium of Alstom and Amec, and, according to Scottish Power's web site, the investment was around £170 million, not the £400 million quoted.--Tim J Wright (talk) 22:06, 6 July 2008 (UTC)Reply


As requested I've included some input/general theory regarding the seawater FGD process which are currently under implementation at Longannet provided by the ALSTOM AMEC consortium ALSTOM Norway's web site. Additionally, such a technology is implemented at RWE's Coal Fired Power station Aberthaw as well as in several plants in Asia (see ALSTOM Norway's web site for reference list).--Marianne Holmen (talk) 22:41, 1 March 2009

Merge proposal – Wellman-Lord Process

edit

I propose to merge the Wellman-Lord Process as one of the flue gas desulfurization processes. Currently the Wellman-Lord Process article is a short and it is questionable if there is enough information for a separate article. If it remains as a separate article, this article here is needing a summary of this process and a wikilink to the Wellman-Lord Process. Beagel (talk) 19:03, 17 March 2009 (UTC)Reply

Beagel, the Wellman-Lord Process is indeed a FGD system that generates a saleable by-product (sulfuric acid). I agree with you, with the mention that if not merged, it should be enriched with details. Please also ask mbeychok's opinion. The Vindictive (talk) 17:15, 22 March 2009 (UTC)Reply

User: Yes, i also think of the Wellman-Lord process as one type of flue gas desulphurization, not an independent subject in its own right. —Preceding unsigned comment added by 68.73.75.198 (talk) 17:51, 20 May 2009 (UTC) I agree that it should be merged, it does not different enough to warrant a new article, nor is there enough information on it to produce a full separate article. Zander05 (talk) 12:13, 12 April 2010 (UTC)Reply

I vote for the merger. Fell Gleaming(talk) 22:56, 11 May 2010 (UTC)Reply

I added this to the "See Also" section right now. I also added this use case under the applications in Sodium sulfite . The process seems really neat! I am (perhaps a bit too much) concerned about Mine Footprint impacts of using things like limestone etc so using something that just needs sodium and sulfur (which can be acquired from the process itself is really cool! --Eric Lotze (talk) 04:08, 15 March 2022 (UTC)Reply

Very few photos

edit

Only one photo can be seen in such long article? Amazing? Please add more photos. -- Extra999 (talk) 17:10, 6 February 2010 (UTC)Reply

Wording of introduction

edit

"Sulfur dioxide is one of the elements forming acid rain" has an issue with the reference of sulfur dioxide as an element which should be corrected to "Sulfur dioxide is one of the compounds forming acid rain". However, if the word "element" was intended to be used to indicate a component of the subject then the wording should be changed (e.g. "Sulfur dioxide is a component of acid rain" or any variant of) to prevent ambiguity.


Grammatical and content points

edit

1) Normally the topic sentence introduces the topic. The introduction had the topic sentence at the end of the section in its own paragraph.

2) The basic principles section has no basic principles. The basic principle of this process appears to be the first sentence of the next section.

"SO2 is an acid gas, and, therefore, the typical sorbent slurries or other materials used to remove the SO2 from the flue gases are alkaline. "


The basic principle section appears to be qualifiers on design processes....if the section is about design let it say so. If it is about chemical principles then it should have information about them....

Basic principles Most FGD systems employ two stages: one for fly ash removal and the other for SO2 removal. Attempts have been made to remove both the fly ash and SO2 in one scrubbing vessel. However, these systems experienced severe maintenance problems and low removal efficiency. In wet scrubbing systems, the flue gas normally passes first through a fly ash removal device, either an electrostatic precipitator or a wet scrubber, and then into the SO2-absorber. However, in dry injection or spray drying operations, the SO2 is first reacted with the sorbent, and then the flue gas passes through a particulate control device. Another important design consideration associated with wet FGD systems is that the flue gas exiting the absorber is saturated with water and still contains some SO2. These gases are highly corrosive to any downstream equipment such as fans, ducts, and stacks. Two methods that can minimize corrosion are: (1) reheating the gases to above their dew point, or (2) choosing construction materials and design conditions that allow equipment to withstand the corrosive conditions. Both alternatives are expensive, and engineers designing the system determine which method to use on a site-by-site basis. [edit]Scrubbing with a basic solid or solution — Preceding unsigned comment added by Primacag (talkcontribs) 15:48, 14 October 2011 (UTC)Reply

Empty sections

edit

Any reason that the two empty sections are in place for almost 2 years? If no one has added to them in that time frame, I would assume that there isn't much to say on the topic. Let's erase them or put some content in them.JSR (talk) 09:47, 1 October 2012 (UTC)Reply

I agree with you. mbeychok (talk) 14:35, 1 October 2012 (UTC)Reply
So, it is time for them to go. You can or I can.JSR (talk) 14:46, 1 October 2012 (UTC)Reply
You have, so I won't. mbeychok (talk) 18:07, 1 October 2012 (UTC)Reply
I got unbusy first apparently.JSR (talk) 18:14, 1 October 2012 (UTC)Reply

Byproducts of Flue-gas desulfurization

edit

Anyone thought of adding info on what the byproducts are used for? I know some of it used to make wallboard, which is a really cool application. I used to work in the gypsum industry.

SusanChana (talk) 19:32, 14 October 2014 (UTC)SusanChanaReply

Add information on use of Iron Oxide as a method to remove Sulfur

edit

there is currently no information about using Iron Oxide as a removal method. — Preceding unsigned comment added by 59.100.68.246 (talk) 00:48, 27 June 2017 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified 4 external links on Flue-gas desulfurization. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 01:13, 27 December 2017 (UTC)Reply

Mention of Flash Dryer Absorber (FDA) Technology

edit
  • This essentially seems like a wet process / Spray Tower , but it is done at high temperature after initial ash removal? I think "novel integrated desulfurization (NID)" is a brand name for this process? I just stumbled upon the term in some papers, checked to see if it was on Wikipedia, and it wasn't (at least in my searching!), so i'd like to ask what you think about this?

I'll dump some papers i found on it below (nothing advanced, i'm not really qualified, this was just some quick searching) :

https://www.semanticscholar.org/paper/ALSTOM-POWER'S-FLASH-DRYER-ABSORBER-FOR-FLUE-GAS-%C3%85hman-Barranger/441d518216e6de822f5fcf343dc0119ff5e7f88d

https://www.osti.gov/servlets/purl/812005 (Specifically the "10.0 ACRONYMS AND ABBREVIATIONS" on Page 238 of 238 )

https://www.slideserve.com/shayna/pollution-control-systems-bringing-you-a-world-of-experience-in-clean-air-solutions

--Eric Lotze (talk) 04:15, 15 March 2022 (UTC)Reply