Swing rifle

(Redirected from Swing Rifles)


The Swing rifle was a design developed by a number of target shooting enthusiasts who came together in 1970 at Bisley. The design's primary instigators were George Swenson and Laurie Ingram.[1] At the time target rifle competition in the UK was dominated by designs based on military actions such as those of the Lee–Enfield and Mauser 1898. These designs were felt to have reached the limits of their development potential; especially when combined with commercially manufactured or hand-loaded ammunition.

SWING Target Rifle
A SWING Mk4
TypeBolt-action rifle
Place of originUnited Kingdom
Production history
DesignerGeorge Swenson & Laurie Ingram
Designed1972
ManufacturerSwing Firearms Ltd
Produced1972 - ~1990
Variants5
Specifications
Cartridge7.62×51mm
ActionBolt-action
Feed systemSingle-shot
SightsDiopter sight

Swenson and Ingram's aim was to develop a design that incorporated the best in target rifle design but maintained adherence to the requirement of the British National Rifle Association that rifles should be of a ‘conventional design and safe’[2] and be within the size and weight constraints imposed by competition rules.

Development

edit

Swenson had been employed by the London gunmaker John Wilkes of Beak Street and whilst with them had commissioned the manufacture of a 'Universal' target sight and a copy of the Finnish Mantari match trigger. He was also the UK importer of Schultz & Larsen cut-rifled barrels. All of these products were later to appear in the Swing products.

Swenson stated[3] that his primary aim was to ‘concentrate on the importance of the trigger’. This combined with a firing action ("lock time") that was measured at less than 1.7 milliseconds was a significant feature in its early success.

In 1972, having successfully developed a prototype (manufactured by Churwick Engineering who had worked for Swenson while at Wilkes) Swenson and Ingram created Swing Firearms Ltd which marketed model SIN 71 Mk1 rifle.[4] The "SIN" of 1971 commemorated in the model name was for George Swenson being disqualified by the NRA for using a 'diopter' visual aid in his backsight, an aid which is now allowed and helps shooters who are no longer young to see the target clearly. The action type was subsequently named as the SWING (for SWenson and INGram). Years after he died, the NRA posthumously 'pardoned' Swenson.

The basic design was:

A single shot, bolt action, target rifle in 7.62×51mm calibre.

 
Swing Mk4 Bolt Head showing four large lugs

A bolt having four locking lugs derived from the Schultz & Larsen Model 54J of 1953 and 62M of 1961. The lugs were moved to the front of the bolt (as opposed to the Schultz & Larsen design) but were of the same ‘generous’ size. The position of the lugs, at 45 degrees when closed, was suggested to be a compromise between the compensation characteristics of the Mauser and Lee–Enfield types of action with the former locking vertically and the latter horizontally.

The Mantaari type trigger. The design came from Scandinavia where it had been designed as a match replacement for the Swedish Mauser 95 rifle.

The case recess in the bolt head was deep at 3mm (.118”) as compared with the standard 2,5mm (.100) set originally by Mauser. This depth was necessitated by the form of the radial sliding extractor. A spring-loaded ejector was fitted.

A bolt stop operating in a slot milled in the bolt body tube.

Further marks were developed as follows:

Mark 2

edit
  • Radial sliding extractor;
  • Improved finish,

Mark 3

edit
  • Investment cast body, with integrated recoil lugs;
  • Bolt lugs guided full travel length by corresponding slot rails in the body;
  • Bolt lug diameter increased to improve guidance in body rails;
  • One piece bolt.

Mark 4

edit

Various body improvements; primarily internal, including:

  • The barrel threads a more conventional UN 1040 × 16 tpi;
  • Longer barrel shank;
  • Bedding Screws are now ¼ × 28 UNF.
  • Bolt lug diameter increased;
  • The opening movement of the bolt lightened by reducing the firing pin travel thus reducing the cocking cam angle.
  • New bolt stop,
  • A light metal firing pin, with a redesigned hard tip to reduce the risk of bending and breakage.
  • Improvements to the extractor mechanism.

Mark 5

edit

A Mark 5 model exists but it is believed that this is just a number change. In the 1986 documentary "Bisley The Queen's Prize", while reviewing the complete history of winning rifles of the competition, what is purported to be a SIN 71 M5 is fired around the 31 minute and 45 second mark.[5]

Following the death of George Swenson, a William Floyd inherited some parts and the rights to the Swing rifle. During this period the final Swing rifles were produced engraved with Swenson's signature and these have become collectable items. [6]

The Swing rifle is no longer in production but its design features have been continued in types such as the RPA and Paramount rifles.

See also

edit

References

edit
  1. ^ Laurie Ingram. "The Birth of the SIN71 Target Rifle". topcorp1.com. Archived from the original on 3 January 2009. Retrieved 1 September 2022.
  2. ^ NRA Handbook inc. NRA Rules of Shooting Section 55.
  3. ^ Cornfield, Susie (1987). The Queen's Prize: the story of the National Rifle Association. Pelham Books. ISBN 0-7207-1751-5
  4. ^ Laurie Ingram (2002). "The SWING SIN71 Rifle Prototype" (PDF). NRA Journal. LXXXI (Summer 2002). National Rifle Association: 24. Retrieved 1 September 2022.
  5. ^ Brian Glover (presenter) (1986). Bisley - The Queen's Prize (Television production). Bisley Camp: British Broadcasting Corporation. Event occurs at 29:26. Retrieved 22 May 2023.
  6. ^ "Obituary - William J Floyd" (PDF). NRA Journal. LXXXVI (Winter 2007). National Rifle Association: 86. 2007. Retrieved 31 August 2022.
edit


  Media related to Swing rifles at Wikimedia Commons