Smart card

(Redirected from Smart chips)

A smart card (SC), chip card, or integrated circuit card (ICC or IC card), is a card used to control access to a resource. It is typically a plastic credit card-sized card with an embedded integrated circuit (IC) chip.[1] Many smart cards include a pattern of metal contacts to electrically connect to the internal chip. Others are contactless, and some are both. Smart cards can provide personal identification, authentication, data storage, and application processing.[2] Applications include identification, financial, public transit, computer security, schools, and healthcare. Smart cards may provide strong security authentication for single sign-on (SSO) within organizations. Numerous nations have deployed smart cards throughout their populations.

Finnish national identity card

The universal integrated circuit card (UICC) for mobile phones, installed as pluggable SIM card or embedded eSIM, is also a type of smart card. As of 2015, 10.5 billion smart card IC chips are manufactured annually, including 5.44 billion SIM card IC chips.[3]

History

edit

The basis for the smart card is the silicon integrated circuit (IC) chip.[4] It was invented by Robert Noyce at Fairchild Semiconductor in 1959. The invention of the silicon integrated circuit led to the idea of incorporating it onto a plastic card in the late 1960s.[4]

Invention

edit
 
One of the first smart card prototypes, created by its inventor Roland Moreno around 1975. The chip has not yet been miniaturized. On this prototype, one can see how each pin of the microchip (center) is connected to the exterior world by a copper connector.
 
First smart card manufactured by Giesecke & Devrient in 1979, already with the finally standardized dimension (ID-1) and a contact area with eight pads (initially on the upper left corner)

The idea of incorporating an integrated circuit chip onto a plastic card was first introduced by the German engineer Helmut Gröttrup. In February 1967, Gröttrup filed the patents DE1574074[5] and DE1574075[6] in West Germany for a tamper-proof identification switch based on a semiconductor device and described contactless communication via inductive coupling.[7] Its primary use was intended to provide individual copy-protected keys for releasing the tapping process at unmanned gas stations. In September 1968, Gröttrup, together with Jürgen Dethloff as an investor, filed further patents for this identification switch, first in Austria[8] and in 1969 as subsequent applications in the United States,[9][10] Great Britain, West Germany and other countries.[11]

Independently, Kunitaka Arimura of the Arimura Technology Institute in Japan developed a similar idea of incorporating an integrated circuit onto a plastic card, and filed a smart card patent in March 1970.[4][12] The following year, Paul Castrucci of IBM filed an American patent titled "Information Card" in May 1971.[12]

In 1974 Roland Moreno patented a secured memory card later dubbed the "smart card".[13][14] In 1976, Jürgen Dethloff introduced the known element (called "the secret") to identify gate user as of USP 4105156.[15]

In 1977, Michel Ugon from Honeywell Bull invented the first microprocessor smart card with two chips: one microprocessor and one memory, and in 1978, he patented the self-programmable one-chip microcomputer (SPOM) that defines the necessary architecture to program the chip. Three years later, Motorola used this patent in its "CP8". At that time, Bull had 1,200 patents related to smart cards. In 2001, Bull sold its CP8 division together with its patents to Schlumberger, who subsequently combined its own internal smart card department and CP8 to create Axalto. In 2006, Axalto and Gemplus, at the time the world's top two smart-card manufacturers, merged and became Gemalto. In 2008, Dexa Systems spun off from Schlumberger and acquired Enterprise Security Services business, which included the smart-card solutions division responsible for deploying the first large-scale smart-card management systems based on public key infrastructure (PKI).

The first mass use of the cards was as a telephone card for payment in French payphones, starting in 1983.[16]

Carte bleue

edit

After the Télécarte, microchips were integrated into all French Carte Bleue debit cards in 1992. Customers inserted the card into the merchant's point-of-sale (POS) terminal, then typed the personal identification number (PIN), before the transaction was accepted. Only very limited transactions (such as paying small highway tolls) are processed without a PIN.

Smart-card-based "electronic purse" systems store funds on the card, so that readers do not need network connectivity. They entered European service in the mid-1990s. They have been common in Germany (Geldkarte), Austria (Quick Wertkarte), Belgium (Proton), France (Moneo[17]), the Netherlands (Chipknip Chipper (decommissioned in 2015)), Switzerland ("Cash"), Norway ("Mondex"), Spain ("Monedero 4B"), Sweden ("Cash", decommissioned in 2004), Finland ("Avant"), UK ("Mondex"), Denmark ("Danmønt") and Portugal ("Porta-moedas Multibanco"). Private electronic purse systems have also been deployed such as the Marines corps (USMC) at Parris Island allowing small amount payments at the cafeteria.

Since the 1990s, smart cards have been the subscriber identity modules (SIMs) used in GSM mobile-phone equipment. Mobile phones are widely used across the world, so smart cards have become very common.

Europay MasterCard Visa (EMV)-compliant cards and equipment are widespread with the deployment led by European countries. The United States started later deploying the EMV technology in 2014, with the deployment still in progress in 2019. Typically, a country's national payment association, in coordination with MasterCard International, Visa International, American Express and Japan Credit Bureau (JCB), jointly plan and implement EMV systems.

Historically, in 1993 several international payment companies agreed to develop smart-card specifications for debit and credit cards. The original brands were MasterCard, Visa, and Europay. The first version of the EMV system was released in 1994. In 1998 the specifications became stable.

EMVCo maintains these specifications. EMVco's purpose is to assure the various financial institutions and retailers that the specifications retain backward compatibility with the 1998 version. EMVco upgraded the specifications in 2000 and 2004.[18]

EMV compliant cards were first accepted into Malaysia in 2005[19] and later into United States in 2014. MasterCard was the first company that was allowed to use the technology in the United States. The United States has felt pushed to use the technology because of the increase in identity theft. The credit card information stolen from Target in late 2013 was one of the largest indicators that American credit card information is not safe. Target made the decision on 30 April 2014 that it would try to implement the smart chip technology to protect itself from future credit card identity theft.

Before 2014, the consensus in America was that there were enough security measures to avoid credit card theft and that the smart chip was not necessary. The cost of the smart chip technology was significant, which was why most of the corporations did not want to pay for it in the United States. The debate finally ended when Target sent out a notice[20] stating unauthorized access to magnetic strips[21] costing Target over 300 million dollars along with the increasing cost of online credit theft was enough for the United States to invest in the technology. The adaptation of EMV's increased significantly in 2015 when the liability shifts occurred in October by the credit card companies.[clarify][citation needed]

Development of contactless systems

edit

Contactless smart cards do not require physical contact between a card and reader. They are becoming more popular for payment and ticketing. Typical uses include mass transit and motorway tolls. Visa and MasterCard implemented a version deployed in 2004–2006 in the U.S., with Visa's current offering called Visa Contactless. Most contactless fare collection systems are incompatible, though the MIFARE Standard card from NXP Semiconductors has a considerable market share in the US and Europe.

Use of "Contactless" smart cards in transport has also grown through the use of low cost chips NXP Mifare Ultralight and paper/card/PET rather than PVC. This has reduced media cost so it can be used for low cost tickets and short term transport passes (up to 1 year typically). The cost is typically 10% that of a PVC smart card with larger memory. They are distributed through vending machines, ticket offices and agents. Use of paper/PET is less harmful to the environment than traditional PVC cards.

Smart cards are also being introduced for identification and entitlement by regional, national, and international organizations. These uses include citizen cards, drivers’ licenses, and patient cards. In Malaysia, the compulsory national ID MyKad enables eight applications and has 18 million users. Contactless smart cards are part of ICAO biometric passports to enhance security for international travel.

Complex smart cards

edit

Complex Cards are smart cards that conform to the ISO/IEC 7810 standard and include components in addition to those found in traditional single chip smart cards. Complex Cards were invented by Cyril Lalo and Philippe Guillaud in 1999 when they designed a chip smart card with additional components, building upon the initial concept consisting of using audio frequencies to transmit data patented by Alain Bernard.[22] The first Complex Card prototype was developed collaboratively by Cyril Lalo and Philippe Guillaud, who were working at AudioSmartCard[23] at the time, and Henri Boccia and Philippe Patrice, who were working at Gemplus. It was ISO 7810-compliant and included a battery, a piezoelectric buzzer, a button, and delivered audio functions, all within a 0.84mm thickness card.

The Complex Card pilot, developed by AudioSmartCard, was launched in 2002 by Crédit Lyonnais, a French financial institution. This pilot featured acoustic tones as a means of authentication. Although Complex Cards were developed since the inception of the smart card industry, they only reached maturity after 2010.

Complex Cards can accommodate various peripherals including:

  • One or more buttons,
  • A digital keyboard,
  • An alphabetic keyboard,
  • A touch keyboard,
  • A small display, for a dynamic Card Security Code (CSC) for instance,
  • A larger digital display, for OTP or balance, QR code
  • An alphanumeric display,
  • A fingerprint sensor,
  • A LED,
  • A buzzer or speaker.

While first generation Complex Cards were battery powered, the second generation is battery-free and receives power through the usual card connector and/or induction .

Sound, generated by a buzzer, was the preferred means of communication for the first projects involving Complex Cards. Later, with the progress of displays, visual communication is now present in almost all Complex Cards.

Functionalities

edit

Complex Cards support all communication protocols present on regular smart cards: contact, thanks to a contact pad as defined ISO/IEC 7816 standard, contactless following the ISO/IEC 14443 standard, and magstripe.

Developers of Complex Cards target several needs when developing them:

  • One Time Password,
  • Provide account information,
  • Provide computation capabilities,
  • Provide a means of transaction security,
  • Provide a means of user authentication.
One time password
edit

A Complex Card can be used to compute a cryptographic value, such as a One-time password. The One-Time Password is generated by a cryptoprocessor encapsulated in the card. To implement this function, the crypto processor must be initialized with a seed value, which enables the identification of the OTPs respective of each card. The hash of seed value has to be stored securely within the card to prevent unauthorized prediction of the generated OTPs.

One-Time Passwords generation is based either on incremental values (event based) or on a real time clock (time based). Using clock-based One-Time Password generation requires the Complex Card to be equipped with a Real-time clock.

Complex Cards used to generate One Time Password have been developed for:

  • Standard Chartered,[24] Singapore,
  • Bank of America,[25] USA,
  • Erste Bank, Croatia,
  • Verisign,[26] USA,
  • RSA Security.[27]
Account information
edit

A Complex Card with buttons can display the balance of one or multiple account(s) linked to the card. Typically, either one button is used to display the balance in the case of a single account card or, in the case of a card linked to multiple accounts, a combination of buttons is used to select a specific account's balance.

For additional security, features such as requiring the user to enter an identification or a security value such as a PIN can be added to a Complex Card.

Complex Cards used to provide account information have been developed for:

  • Getin Bank, Poland,[28]
  • TEB, Turkey.

The latest generation of battery free, button free, Complex Cards can display a balance or other kind of information without requiring any input from the card holder. The information is updated during the use of the card. For instance, in a transit card, key information such as the monetary value balance, the number of remaining trips or the expiry date of a transit pass can be displayed.

Transaction security
edit

A Complex Card being deployed as a payment card can be equipped with capability to provide transaction security. Typically, online payments are made secure thanks to the Card Security Code (CSC), also known as card verification code (CVC2), or card verification value (CVV2). The card security code (CSC) is a 3 or 4 digits number printed on a credit or debit card, used as a security feature for card-not-present (CNP) payment card transactions to reduce the incidence of fraud.

The Card Security Code (CSC) is to be given to the merchant by the cardholder to complete a card-not-present transaction. The CSC is transmitted along with other transaction data and verified by the card issuer. The Payment Card Industry Data Security Standard (PCI DSS) prohibits the storage of the CSC by the merchant or any stakeholder in the payment chain. Although designed to be a security feature, the static CSC is susceptible to fraud as it can easily be memorized by a shop attendant, who could then use it for fraudulent online transactions or sale on the dark web.

This vulnerability has led the industry to develop a Dynamic Card Security Code (DCSC) that can be changed at certain time intervals, or after each contact or contactless EMV transaction. This Dynamic CSC brings significantly better security than a static CSC.

The first generation of Dynamic CSC cards, developed by NagraID Security required a battery, a quartz and Real Time Clock (RTC) embedded within the card to power the computation of a new Dynamic CSC, after expiration of the programmed period.

The second generation of Dynamic CSC cards, developed by Ellipse World, Inc., does not require any battery, quartz, or RTC to compute and display the new dynamic code. Instead, the card obtains its power either through the usual card connector or by induction during every EMV transaction from the Point of Sales (POS) terminal or Automated Teller Machine (ATM) to compute a new DCSC.

The Dynamic CSC, also called dynamic cryptogram, is marketed by several companies, under different brand names:

  • MotionCode, first developed by NagraID Security, a company later acquired by IDEMIA,
  • DCV, the solution offered by Thales,
  • EVC (Ellipse Verification Code) by Ellipse, a Los Angeles, USA based company.

The advantage of the Dynamic Card Security Code (DCSC) is that new information is transmitted with the payment transactions, thus making it useless for a potential fraudster to memorize or store it. A transaction with a Dynamic Card Security Code is carried out exactly the same way, with the same processes and use of parameters as a transaction with a static code in a card-not-present transaction. Upgrading to a DCSC allows cardholders and merchants to continue their payment habits and processes undisturbed.

User authentication
edit

Complex Cards can be equipped with biometric sensors allowing for stronger user authentication. In the typical use case, fingerprint sensors are integrated into a payment card to bring a higher level of user authentication than a PIN.

To implement user authentication using a fingerprint enabled smart card, the user has to authenticate himself/herself to the card by means of the fingerprint before starting a payment transaction.

Several companies[29] offer cards with fingerprint sensors, including:

Components

edit

Complex Cards can incorporate a wide variety of components. The choice of components drives functionality, influences cost, power supply needs, and manufacturing complexity.

Buttons
edit

Depending on Complex Card types, buttons have been added to allow an easy interaction between the user and the card. Typically, these buttons are used to:

  • Select one action, such as which account to obtain the balance, or the unit (e.g. currency or number of trips) in which the information is displayed,
  • Enter numeric data via the addition of a digital keypad,
  • Enter text data via the addition of an alphanumeric keyboard.

While separate keys have been used on prototypes in the early days, capacitive keyboards are the most popular solution now, thanks to technology developments by AudioSmartCard International SA.[30]

The interaction with a capacitive keyboard requires constant power, therefore a battery and a mechanical button are required to activate the card.

Buzzer
edit

The first Complex Cards were equipped with a buzzer that made it possible to broadcast sound. This feature was generally used over the phone to send identification data such as an identifier and one-time passwords (OTPs). Technologies used for sound transmission include DTMF (dual-tone multi-frequency signaling) or FSK (frequency-shift keying).

Companies that offered cards with buzzers include:

  • AudioSmartCard,
  • nCryptone,[31]
  • Prosodie,
  • Société d'exploitation du jeton sécurisé – SEJS.
Display
edit

Displaying data is an essential part of Complex Card functionalities. Depending on the information that needs to be shown, displays can be digital or alphanumeric and of varying lengths. Displays can be located either on the front or back of the card. A front display is the most common solution for showing information such as a One-Time Password or an electronic purse balance. A rear display is more often used for showing a Dynamic Card Security Code (DCSC).

Displays can be made using two technologies:

  • Liquid-crystal display (LCD) : LCDs are easily available from a wide variety of suppliers, and they are able to display either digits or alphabetical data. However, to be fitted in a complex smart card, LCDs need to have a certain degree of flexibility. Also, LCDs need to be powered to keep information displayed.
  • Bistable displays, also known as Ferroelectric liquid crystal displays, are increasingly used as they only require power to refresh the displayed information. The displayed data remains visible, without the need for of any power supply. Bistable displays are also available in a variety of specifications, displaying digits or pixels. Bistable displays are available from E Ink Corporation[32] among others.
Cryptoprocessor
edit

If a Complex smart Card is dedicated to making cryptographic computations (such as generating a one-time password) it may require a secure cryptoprocessor.

Power supply
edit

As Complex Cards contain more components than traditional smart cards, their power consumption must be carefully monitored.

First generation Complex Cards require a power supply even in standby mode. As such, product designers generally included a battery in their design. Incorporating a battery creates an additional burden in terms of complexity, cost, space and flexibility in an already dense design. Including a battery in a Complex Card increases the complexity of the manufacturing process as a battery cannot be hot laminated.

Second generation Complex Cards feature a battery-free design. These cards harvest the necessary power from external sources; for example when the card interacts in a contact or contactless fashion with a payment system or an NFC-enabled smartphone. The use of a bistable display in the card design ensures that the screen remains legible even when the Complex Card is unconnected to the power source.

Manufacturing

edit

Complex Card manufacturing methods are inherited from the smart card industry and from the electronics mounting industry. As Complex Cards incorporate several components while having to remain within 0.8 mm thickness and be flexible, and to comply with the ISO/IEC 7810, ISO/IEC 7811 and ISO/IEC 7816 standards, renders their manufacture more complex than standard smart cards.

One of the most popular manufacturing processes in the smart card industry is lamination. This process involves laminating an inlay between two card faces. The inlay contains the needed electronic components with an antenna printed on an inert support.

Typically battery-powered Complex Cards require a cold lamination manufacturing process. This process impacts the manufacturing lead time and the whole cost of such a Complex Card.

Second generation, battery-free Complex Cards can be manufactured by existing hot lamination process. This automated process, inherited from traditional smart card manufacturing, enables the production of Complex Cards in large quantities while keeping costs under control, a necessity for the evolution from a niche to a mass market.

Card life cycle

edit

As with standard smart cards, Complex Cards go through a lifecycle comprising the following steps:

  • Manufacturing,
  • Personalization,
  • User enrollment, if needed by the application,
  • Provisioning,
  • Active life,
  • Cancellation,
  • Recycling / destruction.

As Complex Cards bring more functionalities than standard smart cards and, due to their complexity, their personalization can take longer or require more inputs. Having Complex Cards that can be personalized by the same machines and the same processes as regular smart cards allows them to be integrated more easily in existing manufacturing chains and applications.

First generation, battery-operated Complex Cards require specific recycling processes, mandated by different regulatory bodies. Additionally, keeping battery-operated Complex Cards in inventory for extended periods of time may reduce their performance due to battery ageing.

Second-generation battery-free technology ensures operation during the entire lifetime of the card and eliminates self-discharge, providing extended shelf life, and is more eco-friendly.

History and major players

edit

Since the inception of smart cards, innovators have been trying to add extra features. As technologies have matured and have been industrialized, several smart card industry players have been involved in Complex Cards.

The Complex Card concept began in 1999 when Cyril Lalo and Philippe Guillaud, its inventors, first designed a smart card with additional components. The first prototype was developed collaboratively by Cyril Lalo, who was the CEO of AudioSmartCard at the time, and Henri Boccia and Philippe Patrice, from Gemplus. The prototype included a button and audio functions on a 0.84mm thick ISO 7810-compliant card .

Since then, Complex Cards have been mass-deployed primarily by NagraID Security.

AudioSmartCard

edit

AudioSmartCard International SA[33] was instrumental in developing the first Complex Card that included a battery, a piezoelectric buzzer, a button, and audio functions all on a 0.84mm thick, ISO 7810-compatible card.

AudioSmartCard was founded in 1993 and specialized in the development and marketing of acoustic tokens incorporating security features. These acoustic tokens exchanged data in the form of sounds transmitted over a phone line. In 1999, AudioSmartCard transitioned to a new leadership under Cyril Lalo and Philippe Guillaud, who also became major shareholders. They made AudioSmartCard evolve towards the smart card world. In 2003 Prosodie,[34] a subsidiary of Capgemini, joined the shareholders of AudioSmartCard.

AudioSmartCard was renamed nCryptone,[35] in 2004.

CardLab Innovation

edit

CardLab Innovation,[36] incorporated in 2006 in Herlev, Denmark, specializes in Complex Cards that include a switch, a biometric reader, an RFID jammer, and one or more magstripes. The company works with manufacturing partners in China and Thailand and owns a card lamination factory in Thailand.

Coin

edit

Coin was a US-based startup[37] founded in 2012 by Kanishk Parashar.[38] It developed a Complex Card capable of storing the data of several credit and debit cards. The card prototype was equipped with a display[39][full citation needed] and a button that enabled the user to switch between different cards. In 2015, the original Coin card concept evolved into Coin 2.0 adding contactless communication to its original magstripe emulation.[40]

Coin was acquired by Fitbit in May 2016[41] and all Coin activities were discontinued in February 2017.[42]

Ellipse World, Inc.

edit

Ellipse World, Inc.[43] was founded in 2017 by Cyril Lalo and Sébastien Pochic, both recognized experts in Complex Card technology. Ellipse World, Inc. specializes in battery-free Complex Card technology.

The Ellipse patented technologies enable smart card manufacturers to use their existing dual interface payment card manufacturing process and supply chain to build battery-free, second generation Complex Cards with display capabilities. Thanks to this ease of integration, smart card vendors are able to address banking, transit and prepaid cards markets.

EMue Technologies

edit

EMue[44] Technologies, headquartered in Melbourne, Australia, designed and developed authentication solutions for the financial services industry from 2009 to 2015.[45] The company's flagship product, developed in collaboration with Cyril Lalo and Philippe Guillaud, was the eMue Card, a Visa CodeSure[46] credit card with an embedded keypad, a display and a microprocessor.

Feitian Technologies

edit

Feitian Technologies, a China-based company created in 1998, provides cyber security products and solutions. The company offers security solutions based on smart cards as well as other authentication devices. These include Complex Cards, that incorporate a display,[47] a keypad[48] or a fingerprint sensor.[49]

Fingerprint Cards

edit

Fingerprint Cards AB (or Fingerprints[50]) is a Swedish company specializing in biometric solutions. The company sells biometric sensors and has recently introduced payment cards incorporating a fingerprint sensor[51] such as the Zwipe card,[52] a biometric dual-interface payment card using an integrated sensor from Fingerprints.

Giesecke+Devrient

edit

Giesecke & Devrient, also known as G+D,[53] is a German company headquartered in Munich that provides banknotes, security printing, smart cards and cash handling systems. Its smart card portfolio includes display cards, OTP cards, as well as cards displaying a Dynamic CSC.

Gemalto

edit

Gemalto, a division of Thales Group, is a major player in the secure transaction industry. The company's Complex Card portfolio includes cards with a display[54] or a fingerprint sensor.[55] These cards may display an OTP[56] or a Dynamic CSC.[57]

Idemia

edit

IDEMIA is the product of the 2017[58] merger of Oberthur Technologies and Morpho. The combined company has positioned itself as a global provider of financial cards, SIM cards, biometric devices as well as public and private identity solutions. Due to Oberthur's acquisition of NagraID Security in 2014, Idemia's Complex Card offerings include the F.CODE[59] biometric payment card that includes a fingerprint sensor, and its battery-powered Motion Code[60] card that displays a Dynamic CSC.

Idex

edit

IDEX Biometrics ASA, incorporated in Norway, specializes in fingerprint identification technologies for personal authentication. The company offers fingerprint sensors[61] and modules[62] that are ready to be embedded into cards.[63]

Innovative Card Technologies

edit

Founded in 2002, by Alan Finkelstein, Innovative Card Technologies developed and commercialized enhancements for the smart card market. The company acquired the display card assets of nCryptone[64] in 2006. Innovative Card Technologies has ceased its activities.

NagraID

edit

Nagra ID, now known as NID,[65] was a wholly-owned subsidiary of the Kudelski Group until 2014. NID can trace its history with Complex Cards back to 2003 when it collaborated on development with nCryptone. Nagra ID was instrumental in developing the cold lamination process for Complex Cards manufacturing.

Nagra ID manufactures Complex Cards[66] that can include a battery, buttons, displays or other electronic components.

NagraID Security

edit

Nagra ID Security began in 2008 as a spinoff of Nagra ID to focus on Complex Card development and manufacturing. The company was owned by Kudelski Group (50%), Cyril Lalo (25%) and Philippe Guillaud (25%).

NagraID Security quickly became a leading player in the adoption of Complex Cards due, in large part, to its development of MotionCode cards that featured a small display to enable a Card Security Code (CVV2).

NagraID Security was the first Complex Cards manufacturer to develop a mass market for payment display cards. Their customers included:

  • ABSA,[67] South Africa,
  • Banco Bicentenario, Venezuela,
  • Banco MontePaschi, Belgium,
  • Erste Bank, Croatia,
  • Getin Bank, Poland,
  • Standard Chartered Bank, Singapore.

NagraID Security also delivered One-Time Password cards to companies including:

  • Bank of America,
  • HID Security,
  • PayPal,
  • RSA Security,
  • Verisign.

In 2014, NagraID Security was sold to Oberthur Technologies (now IDEMIA).

nCryptone

edit

nCryptone emerged in 2004 from the renaming of AudioSmartCard. nCryptone was headed by Cyril Lalo and Philippe Guillaud[68] and developed technologies around authentication servers and devices.

nCryptone display card assets were acquired by Innovative Card Technologies in 2006.[69]

Oberthur Technologies, now Idemia

edit

Oberthur Technologies, now IDEMIA, is one of the major players in the secure transactions industry. It acquired the business of NagraID Security in 2014. Oberthur then merged with Morpho and the combined entity was renamed Idemia in 2017.

Major references in the Complex Cards business include:

  • BPCE Group,[70] France,
  • Orange Bank,[71] France,
  • Société Générale,[72] France.

Plastc

edit

Set up in 2009, Plastc announced a single card that could digitally hold the data of up to 20 credit or debit cards. The company succeeded in raising US$9 million through preorders but failed to deliver any product.[73] Plastc was then acquired[74] in 2017 by Edge Mobile Payments,[75] a Santa Cruz-based Fintech company. The Plastc project continues as the Edge card,[76] a dynamic payment card that consolidates several payment cards in one device. The card is equipped with a battery and an ePaper screen and can store data from up to 50 credit, debit, loyalty and gift cards.

Stratos

edit

Stratos[77] was created in 2012 in Ann Arbor, Michigan, USA. In 2015, Stratos developed the Stratos Bluetooth Connected Card,[78] which was designed to integrate up to three credit and debit card in a single card format and featured a smartphone app used to manage the card. Due to its Lithium ion thin film battery, the Stratos card was equipped with LEDs and communicated in contactless mode and in Bluetooth low Energy.

In 2017 Stratos was acquired[79] by CardLab Innovation, a company headquartered in Herlev, Denmark.

Swyp

edit

SWYP[80] was the brand name of a card developed by Qvivr, a company incorporated in 2014 in Fremont, California. SWYP was introduced in 2015 and dubbed the world's first smart wallet. SWYP was a metal card with the ability to combine over 25 credit, debit, gift and loyalty cards. The card worked in conjunction with a smartphone app used to manage the cards. The Swyp card included a battery, a button and a matrix display that showed which card was in use. The company registered users in its beta testing program, but the product never shipped on a commercial scale.

Qvivr raised US$5 million in January 2017[81] and went out of business in November 2017.

Businesses

edit

Complex Cards have been adopted by numerous financial institutions worldwide. They may include different functionalities such as payment cards (credit, debit, prepaid), One-time password, mass-transit, and dynamic Card Security Code (CVV2).

Complex Card technology is used by numerous financial institutions including:

Design

edit

A smart card may have the following generic characteristics:

  • Dimensions similar to those of a credit card. ID-1 of the ISO/IEC 7810 standard defines cards as nominally 85.60 by 53.98 millimetres (3.37 in × 2.13 in). Another popular size is ID-000, which is nominally 25 by 15 millimetres (0.98 in × 0.59 in) (commonly used in SIM cards). Both are 0.76 millimetres (0.030 in) thick.
  • Contains a tamper-resistant security system (for example a secure cryptoprocessor and a secure file system) and provides security services (e.g., protects in-memory information).
  • Managed by an administration system, which securely interchanges information and configuration settings with the card, controlling card blacklisting and application-data updates.
  • Communicates with external services through card-reading devices, such as ticket readers, ATMs, Dip reader, etc.
  • Smart cards are typically made of plastic, generally polyvinyl chloride, but sometimes polyethylene-terephthalate-based polyesters, acrylonitrile butadiene styrene or polycarbonate.

Since April 2009, a Japanese company has manufactured reusable financial smart cards made from paper.[98]

Internal structure

edit

Data structures

edit

As mentioned above, data on a smart card may be stored in a file system (FS). In smart card file systems, the root directory is called the "master file" ("MF"), subdirectories are called "dedicated files" ("DF"), and ordinary files are called "elementary files" ("EF").[99]

Logical layout

edit

The file system mentioned above is stored on an EEPROM (storage or memory) within the smartcard.[99] In addition to the EEPROM, other components may be present, depending upon the kind of smartcard. Most smartcards have one of three logical layouts:

In cards with microprocessors, the microprocessor sits inline between the reader and the other components. The operating system that runs on the microprocessor mediates the reader's access to those components to prevent unauthorized access.[99]

Physical interfaces

edit

Contact smart cards

edit
 
Illustration of smart-card structure and packaging
 
4 by 4 mm silicon chip in a SIM card, which was peeled open. Note the thin gold bonding wires and the regular, rectangular digital-memory areas.
 
A smart-card pinout. VCC: Power supply. RST: Reset signal, used to reset the card's communications. CLK: Provides the card with a clock signal, from which data communications timing is derived. GND: Ground (reference voltage). VPP: ISO/IEC 7816-3:1997 designated this as a programming voltage: an input for a higher voltage to program persistent memory (e.g., EEPROM). ISO/IEC 7816-3:2006 designates it SPU, for either standard or proprietary use, as input and/or output. I/O: Serial input and output (half-duplex). C4, C8: The two remaining contacts are AUX1 and AUX2 respectively and are used for USB interfaces and other uses.[100] However, the usage defined in ISO/IEC 7816-2:1999/Amd 1:2004 may have been superseded by ISO/IEC 7816-2:2007.[101]
 
Contact-type smart cards may have many different contact pad layouts, such as these SIMs.

Contact smart cards have a contact area of approximately 1 square centimetre (0.16 sq in), comprising several gold-plated contact pads. These pads provide electrical connectivity when inserted into a reader,[102] which is used as a communications medium between the smart card and a host (e.g., a computer, a point of sale terminal) or a mobile telephone. Cards do not contain batteries; power is supplied by the card reader.

The ISO/IEC 7810 and ISO/IEC 7816 series of standards define:

  • physical shape and characteristics,
  • electrical connector positions and shapes,
  • electrical characteristics,
  • communications protocols, including commands sent to and responses from the card,
  • basic functionality.

Because the chips in financial cards are the same as those used in subscriber identity modules (SIMs) in mobile phones, programmed differently and embedded in a different piece of PVC, chip manufacturers are building to the more demanding GSM/3G standards. So, for example, although the EMV standard allows a chip card to draw 50 mA from its terminal, cards are normally well below the telephone industry's 6 mA limit. This allows smaller and cheaper financial card terminals.

Communication protocols for contact smart cards include T=0 (character-level transmission protocol, defined in ISO/IEC 7816-3) and T=1 (block-level transmission protocol, defined in ISO/IEC 7816-3).

Contactless smart cards

edit

Contactless smart cards communicate with readers under protocols defined in the ISO/IEC 14443 standard. They support data rates of 106–848 kbit/s. These cards require only proximity to an antenna to communicate. Like smart cards with contacts, contactless cards do not have an internal power source. Instead, they use a loop antenna coil to capture some of the incident radio-frequency interrogation signal, rectify it, and use it to power the card's electronics. Contactless smart media can be made with PVC, paper/card and PET finish to meet different performance, cost and durability requirements.

APDU transmission by a contactless interface is defined in ISO/IEC 14443-4.

Hybrids

edit
 
A hybrid smart card, which clearly shows the antenna connected to the main chip

Hybrid cards implement contactless and contact interfaces on a single card with unconnected chips including dedicated modules/storage and processing.

Dual-interface

Dual-interface cards implement contactless and contact interfaces on a single chip with some shared storage and processing. An example is Porto's multi-application transport card, called Andante, which uses a chip with both contact and contactless (ISO/IEC 14443 Type B) interfaces. Numerous payment cards worldwide are based on hybrid card technology allowing them to communicate in contactless as well as contact modes.

The CCID (Chip Card Interface Device) is a USB protocol that allows a smart card to be interfaced to a computer using a card reader which has a standard USB interface. This allows the smart card to be used as a security token for authentication and data encryption such as Bitlocker. A typical CCID is a USB dongle and may contain a SIM.

Logical interfaces

edit

Reader side

edit

Different smart cards implement one or more reader-side protocols. Common protocols here include CT-API and PC/SC.[99]

Application side

edit

Smartcard operating systems may provide application programming interfaces (APIs) so that developers can write programs ("applications") to run on the smartcard. Some such APIs, such as Java Card, allow programs to be uploaded to the card without replacing the card's entire operating system.[99]

Applications

edit

Financial

edit

Smart cards serve as credit or ATM cards, fuel cards, mobile phone SIMs, authorization cards for pay television, household utility pre-payment cards, high-security identification and access badges, and public transport and public phone payment cards.

Smart cards may also be used as electronic wallets. The smart card chip can be "loaded" with funds to pay parking meters, vending machines or merchants. Cryptographic protocols protect the exchange of money between the smart card and the machine. No connection to a bank is needed. The holder of the card may use it even if not the owner. Examples are Proton, Geldkarte, Chipknip and Moneo. The German Geldkarte is also used to validate customer age at vending machines for cigarettes.

These are the best known payment cards (classic plastic card):

  • Visa: Visa Contactless, Quick VSDC, "qVSDC", Visa Wave, MSD, payWave
  • Mastercard: PayPass Magstripe, PayPass MChip
  • American Express: ExpressPay
  • Discover: Zip
  • Unionpay: QuickPass

Roll-outs started in 2005 in the U.S. Asia and Europe followed in 2006. Contactless (non-PIN) transactions cover a payment range of ~$5–50. There is an ISO/IEC 14443 PayPass implementation. Some, but not all, PayPass implementations conform to EMV.

Non-EMV cards work like magnetic stripe cards. This is common in the U.S. (PayPass Magstripe and Visa MSD). The cards do not hold or maintain the account balance. All payment passes without a PIN, usually in off-line mode. The security of such a transaction is no greater than with a magnetic stripe card transaction.[citation needed]

EMV cards can have either contact or contactless interfaces. They work as if they were a normal EMV card with a contact interface. Via the contactless interface they work somewhat differently, in that the card commands enabled improved features such as lower power and shorter transaction times. EMV standards include provisions for contact and contactless communications. Typically modern payment cards are based on hybrid card technology and support both contact and contactless communication modes.

The subscriber identity modules used in mobile-phone systems are reduced-size smart cards, using otherwise identical technologies.

Identification

edit

Smart-cards can authenticate identity. Sometimes they employ a public key infrastructure (PKI). The card stores an encrypted digital certificate issued from the PKI provider along with other relevant information. Examples include the U.S. Department of Defense (DoD) Common Access Card (CAC), and other cards used by other governments for their citizens. If they include biometric identification data, cards can provide superior two- or three-factor authentication.

Smart cards are not always privacy-enhancing, because the subject may carry incriminating information on the card. Contactless smart cards that can be read from within a wallet or even a garment simplify authentication; however, criminals may access data from these cards.

Cryptographic smart cards are often used for single sign-on. Most advanced smart cards include specialized cryptographic hardware that uses algorithms such as RSA and Digital Signature Algorithm (DSA). Today's cryptographic smart cards generate key pairs on board, to avoid the risk from having more than one copy of the key (since by design there usually isn't a way to extract private keys from a smart card). Such smart cards are mainly used for digital signatures and secure identification.

The most common way to access cryptographic smart card functions on a computer is to use a vendor-provided PKCS#11 library.[citation needed] On Microsoft Windows the Cryptographic Service Provider (CSP) API is also supported.

The most widely used cryptographic algorithms in smart cards (excluding the GSM so-called "crypto algorithm") are Triple DES and RSA. The key set is usually loaded (DES) or generated (RSA) on the card at the personalization stage.

Some of these smart cards are also made to support the National Institute of Standards and Technology (NIST) standard for Personal Identity Verification, FIPS 201.

Turkey implemented the first smart card driver's license system in 1987. Turkey had a high level of road accidents and decided to develop and use digital tachograph devices on heavy vehicles, instead of the existing mechanical ones, to reduce speed violations. Since 1987, the professional driver's licenses in Turkey have been issued as smart cards. A professional driver is required to insert his driver's license into a digital tachograph before starting to drive. The tachograph unit records speed violations for each driver and gives a printed report. The driving hours for each driver are also being monitored and reported. In 1990 the European Union conducted a feasibility study through BEVAC Consulting Engineers, titled "Feasibility study with respect to a European electronic drivers license (based on a smart-card) on behalf of Directorate General VII". In this study, chapter seven describes Turkey's experience.

Argentina's Mendoza province began using smart card driver's licenses in 1995. Mendoza also had a high level of road accidents, driving offenses, and a poor record of recovering fines.[citation needed] Smart licenses hold up-to-date records of driving offenses and unpaid fines. They also store personal information, license type and number, and a photograph. Emergency medical information such as blood type, allergies, and biometrics (fingerprints) can be stored on the chip if the card holder wishes. The Argentina government anticipates that this system will help to collect more than $10 million per year in fines.

In 1999 Gujarat was the first Indian state to introduce a smart card license system.[103] As of 2005, it has issued 5 million smart card driving licenses to its people.[104]

In 2002, the Estonian government started to issue smart cards named ID Kaart as primary identification for citizens to replace the usual passport in domestic and EU use. As of 2010 about 1 million smart cards have been issued (total population is about 1.3 million) and they are widely used in internet banking, buying public transport tickets, authorization on various websites etc.

By the start of 2009, the entire population of Belgium was issued eID cards that are used for identification. These cards contain two certificates: one for authentication and one for signature. This signature is legally enforceable. More and more services in Belgium use eID for authorization.[105]

Spain started issuing national ID cards (DNI) in the form of smart cards in 2006 and gradually replaced all the older ones with smart cards. The idea was that many or most bureaucratic acts could be done online but it was a failure because the Administration did not adapt and still mostly requires paper documents and personal presence.[106][107][108][109]

On 14 August 2012, the ID cards in Pakistan were replaced. The Smart Card is a third generation chip-based identity document that is produced according to international standards and requirements. The card has over 36 physical security features and has the latest[clarification needed] encryption codes. This smart card replaced the NICOP (the ID card for overseas Pakistani).

Smart cards may identify emergency responders and their skills. Cards like these allow first responders to bypass organizational paperwork and focus more time on the emergency resolution. In 2004, The Smart Card Alliance expressed the needs: "to enhance security, increase government efficiency, reduce identity fraud, and protect personal privacy by establishing a mandatory, Government-wide standard for secure and reliable forms of identification".[110] emergency response personnel can carry these cards to be positively identified in emergency situations. WidePoint Corporation, a smart card provider to FEMA, produces cards that contain additional personal information, such as medical records and skill sets.

In 2007, the Open Mobile Alliance (OMA) proposed a new standard defining V1.0 of the Smart Card Web Server (SCWS), an HTTP server embedded in a SIM card intended for a smartphone user.[111] The non-profit trade association SIMalliance has been promoting the development and adoption of SCWS. SIMalliance states that SCWS offers end-users a familiar, OS-independent, browser-based interface to secure, personal SIM data. As of mid-2010, SIMalliance had not reported widespread industry acceptance of SCWS.[112] The OMA has been maintaining the standard, approving V1.1 of the standard in May 2009, and V1.2 was expected to be approved in October 2012.[113]

Smart cards are also used to identify user accounts on arcade machines.[114]

Public transit

edit
 
SmartRider smart card (Transperth)
 
Diagram of Japan's IC card systems and their nationwide interoperability acceptance under the Nationwide Mutual Usage Service (as of March 2024)

Smart cards, used as transit passes, and integrated ticketing are used by many public transit operators. Card users may also make small purchases using the cards. Some operators offer points for usage, exchanged at retailers or for other benefits.[115] Examples include Singapore's CEPAS, Malaysia's Touch n Go, Ontario's Presto card, Hong Kong's Octopus card, Tokyo's Suica and PASMO cards, London's Oyster card, Ireland's Leap Card, Brussels' MoBIB, Québec's Opus card, Boston's CharlieCard, San Francisco's Clipper card, Washington, D.C.'s SmarTrip, Auckland's AT Hop, Brisbane's go card, Perth's SmartRider, Sydney's Opal card and Victoria's myki. However, these present a privacy risk because they allow the mass transit operator (and the government) to track an individual's movement. In Finland, for example, the Data Protection Ombudsman prohibited the transport operator Helsinki Metropolitan Area Council (YTV) from collecting such information, despite YTV's argument that the card owner has the right to a list of trips paid with the card. Earlier, such information was used in the investigation of the Myyrmanni bombing.[citation needed]

The UK's Department for Transport mandated smart cards to administer travel entitlements for elderly and disabled residents. These schemes let residents use the cards for more than just bus passes. They can also be used for taxi and other concessionary transport. One example is the "Smartcare go" scheme provided by Ecebs.[116] The UK systems use the ITSO Ltd specification. Other schemes in the UK include period travel passes, carnets of tickets or day passes and stored value which can be used to pay for journeys. Other concessions for school pupils, students and job seekers are also supported. These are mostly based on the ITSO Ltd specification.

Many smart transport schemes include the use of low cost smart tickets for simple journeys, day passes and visitor passes. Examples include Glasgow SPT subway. These smart tickets are made of paper or PET which is thinner than a PVC smart card e.g. Confidex smart media.[117] The smart tickets can be supplied pre-printed and over-printed or printed on demand.

In Sweden, as of 2018–19, the old SL Access smart card system has started to be phased out and replaced by smart phone apps. The phone apps have less cost, at least for the transit operators who don't need any electronic equipment (the riders provide that). The riders are able buy tickets anywhere and don't need to load money onto smart cards. New NFC smart cards are still in use for foreseeable future (as of 2024).

Video games

edit

In Japanese amusement arcades, contactless smart cards (usually referred to as "IC cards") are used by game manufacturers as a method for players to access in-game features (both online like Konami E-Amusement and Sega ALL.Net and offline) and as a memory support to save game progress. Depending on a case by case scenario, the machines can use a game-specific card or a "universal" one usable on multiple machines from the same manufacturer/publisher. Amongst the most widely used there are Banapassport by Bandai Namco, E-amusement pass by Konami, Aime by Sega and Nesica by Taito.

In 2018, in an effort to make arcade game IC cards more user friendly,[118] Konami, Bandai Namco and Sega have agreed on a unified system of cards named Amusement IC. Thanks to this agreement, the three companies are now using a unified card reader in their arcade cabinets, so that players are able to use their card, no matter if a Banapassport, an e-Amusement Pass or an Aime, with hardware and ID services of all three manufacturers. A common logo for Amusement IC cards has been created, and this is now displayed on compatible cards from all three companies. In January 2019, Taito announced[119] that their Nesica card was also joining the Amusement IC agreement with the other three companies.

Computer security

edit

Smart cards can be used as a security token.

Mozilla's Firefox web browser can use smart cards to store certificates for use in secure web browsing.[120]

Some disk encryption systems, such as VeraCrypt and Microsoft's BitLocker, can use smart cards to securely hold encryption keys, and also to add another layer of encryption to critical parts of the secured disk.

GnuPG, the well known encryption suite, also supports storing keys in a smart card.[121]

Smart cards are also used for single sign-on to log on to computers.

Schools

edit

Smart cards are being provided to students at some schools and colleges.[122][123][124] Uses include:

  • Tracking student attendance
  • As an electronic purse, to pay for items at canteens, vending machines, laundry facilities, etc.
  • Tracking and monitoring food choices at the canteen, to help the student maintain a healthy diet
  • Tracking loans from the school library
  • Access control for admittance to restricted buildings, dormitories, and other facilities. This requirement may be enforced at all times (such as for a laboratory containing valuable equipment), or just during after-hours periods (such as for an academic building that is open during class times, but restricted to authorized personnel at night), depending on security needs.
  • Access to transportation services

Healthcare

edit

Smart health cards can improve the security and privacy of patient information, provide a secure carrier for portable medical records, reduce health care fraud, support new processes for portable medical records, provide secure access to emergency medical information, enable compliance with government initiatives (e.g., organ donation) and mandates, and provide the platform to implement other applications as needed by the health care organization.[125][126]

Other uses

edit

Smart cards are widely used to encrypt digital television streams. VideoGuard is a specific example of how smart card security worked.

Multiple-use systems

edit

The Malaysian government promotes MyKad as a single system for all smart-card applications. MyKad started as identity cards carried by all citizens and resident non-citizens. Available applications now include identity, travel documents, drivers license, health information, an electronic wallet, ATM bank-card, public toll-road and transit payments, and public key encryption infrastructure. The personal information inside the MYKAD card can be read using special APDU commands.[127]

Security

edit

Smart cards have been advertised as suitable for personal identification tasks, because they are engineered to be tamper resistant. The chip usually implements some cryptographic algorithm. There are, however, several methods for recovering some of the algorithm's internal state.

Differential power analysis involves measuring the precise time and electric current required for certain encryption or decryption operations. This can deduce the on-chip private key used by public key algorithms such as RSA. Some implementations of symmetric ciphers can be vulnerable to timing or power attacks as well.

Smart cards can be physically disassembled by using acid, abrasives, solvents, or some other technique to obtain unrestricted access to the on-board microprocessor. Although such techniques may involve a risk of permanent damage to the chip, they permit much more detailed information (e.g., photomicrographs of encryption hardware) to be extracted.

Benefits

edit

The benefits of smart cards are directly related to the volume of information and applications that are programmed for use on a card. A single contact/contactless smart card can be programmed with multiple banking credentials, medical entitlement, driver's license/public transport entitlement, loyalty programs and club memberships to name just a few. Multi-factor and proximity authentication can and has been embedded into smart cards to increase the security of all services on the card. For example, a smart card can be programmed to only allow a contactless transaction if it is also within range of another device like a uniquely paired mobile phone. This can significantly increase the security of the smart card.

Governments and regional authorities save money because of improved security, better data and reduced processing costs. These savings help reduce public budgets or enhance public services. There are many examples in the UK, many using a common open LASSeO specification.

Individuals have better security and more convenience with using smart cards that perform multiple services. For example, they only need to replace one card if their wallet is lost or stolen. The data storage on a card can reduce duplication, and even provide emergency medical information.

Advantages

edit

The first main advantage of smart cards is their flexibility. Smart cards have multiple functions which simultaneously can be an ID, a credit card, a stored-value cash card, and a repository of personal information such as telephone numbers or medical history. The card can be easily replaced if lost, and, the requirement for a PIN (or other form of security) provides additional security from unauthorised access to information by others. At the first attempt to use it illegally, the card would be deactivated by the card reader itself.

The second main advantage is security. Smart cards can be electronic key rings, giving the bearer ability to access information and physical places without need for online connections. They are encryption devices, so that the user can encrypt and decrypt information without relying on unknown, and therefore potentially untrustworthy, appliances such as ATMs. Smart cards are very flexible in providing authentication at different level of the bearer and the counterpart. Finally, with the information about the user that smart cards can provide to the other parties, they are useful devices for customizing products and services.

Other general benefits of smart cards are:

  • Portability
  • Increasing data storage capacity
  • Reliability that is virtually unaffected by electrical and magnetic fields.

Smart cards and electronic commerce

edit

Smart cards can be used in electronic commerce, over the Internet, though the business model used in current electronic commerce applications still cannot use the full feature set of the electronic medium. An advantage of smart cards for electronic commerce is their use customize services. For example, for the service supplier to deliver the customized service, the user may need to provide each supplier with their profile, a boring and time-consuming activity. A smart card can contain a non-encrypted profile of the bearer, so that the user can get customized services even without previous contacts with the supplier.

Disadvantages

edit
 
A false smart card, with two 8-bit CMOS microcontrollers, used in the 1990s to decode the signals of Sky Television

The plastic or paper card in which the chip is embedded is fairly flexible. The larger the chip, the higher the probability that normal use could damage it. Cards are often carried in wallets or pockets, a harsh environment for a chip and antenna in contactless cards. PVC cards can crack or break if bent/flexed excessively. However, for large banking systems, failure-management costs can be more than offset by fraud reduction.[citation needed]

The production, use and disposal of PVC plastic is known to be more harmful to the environment than other plastics.[128] Alternative materials including chlorine free plastics and paper are available for some smart applications.

If the account holder's computer hosts malware, the smart card security model may be broken. Malware can override the communication (both input via keyboard and output via application screen) between the user and the application. Man-in-the-browser malware (e.g., the Trojan Silentbanker) could modify a transaction, unnoticed by the user. Banks like Fortis and Belfius in Belgium and Rabobank ("random reader") in the Netherlands combine a smart card with an unconnected card reader to avoid this problem. The customer enters a challenge received from the bank's website, a PIN and the transaction amount into the reader. The reader returns an 8-digit signature. This signature is manually entered into the personal computer and verified by the bank, preventing point-of-sale-malware from changing the transaction amount.

Smart cards have also been the targets of security attacks. These attacks range from physical invasion of the card's electronics, to non-invasive attacks that exploit weaknesses in the card's software or hardware. The usual goal is to expose private encryption keys and then read and manipulate secure data such as funds. Once an attacker develops a non-invasive attack for a particular smart card model, he or she is typically able to perform the attack on other cards of that model in seconds, often using equipment that can be disguised as a normal smart card reader.[129] While manufacturers may develop new card models with additional information security, it may be costly or inconvenient for users to upgrade vulnerable systems. Tamper-evident and audit features in a smart card system help manage the risks of compromised cards.

Another problem is the lack of standards for functionality and security. To address this problem, the Berlin Group launched the ERIDANE Project to propose "a new functional and security framework for smart-card based Point of Interaction (POI) equipment".[130]

See also

edit

References

edit
  1. ^ "ISO/IEC 7816-2:2007 – Assignment of contacts C4 and C8". iso.org. Archived from the original on 4 March 2016. Retrieved 20 August 2015.
  2. ^ Multi-application Smart Cards. Cambridge University Press.
  3. ^ Tait, Don (25 August 2016). "Smart card IC shipments to reach 12.8 billion units in 2020". IHS Technology. IHS Markit. Archived from the original on 24 October 2019. Retrieved 24 October 2019.
  4. ^ a b c Chen, Zhiqun (2000). Java Card Technology for Smart Cards: Architecture and Programmer's Guide. Addison-Wesley Professional. pp. 3–4. ISBN 9780201703290.
  5. ^ DE application 1574074, Gröttrup, Helmut, "Nachahmungssicherer Identifizierungsschalter", published 1971-11-25 
  6. ^ DE application 1574075, Gröttrup, Helmut, "Identifizierungsschalter mit induktiver Zuordnung", published 1971-11-25 
  7. ^ "Chipkarte Helmut Gröttrup "Identifizierungsschalter"" [Helmut Gröttrup "Identification Switch"] (PDF). German Patent and Trade Mark Office (in German). 2021. Archived (PDF) from the original on 7 April 2023. Retrieved 31 March 2023.
  8. ^ AT patent 287366, Dethloff, Jürgen & Gröttrup, Helmut, "Identifizierungsschalter", issued 1971-01-21, assigned to Intelectron Patentverwaltung 
  9. ^ US patent 3641316, Dethloff, Jürgen & Gröttrup, Helmut, "Identification System", issued 1972-02-08 
  10. ^ US patent 3678250, Dethloff, Jürgen & Gröttrup, Helmut, "Identification Switch", issued 1972-07-18 
  11. ^ Böttge, Horst; Mahl, Tobias; Kamp, Michael (2013). Giesecke+Devrient (ed.). From Eurocheque Card to Mobile Security 1968–2012. Battenberg Gietl Verlag. ISBN 978-3866465497.
  12. ^ a b Jurgensen, Timothy M.; Guthery, Scott B. (2002). Smart Cards: The Developer's Toolkit. Prentice Hall Professional. pp. 2–3. ISBN 9780130937308. Archived from the original on 19 August 2020. Retrieved 30 September 2019.
  13. ^ "Monticello Memoirs Program". Computerworld honors. Archived from the original on 3 March 2016. Retrieved 13 February 2012.
  14. ^ "history of smartcard invention". Archived from the original on 25 April 2013. Retrieved 29 July 2016.
  15. ^ "Espacenet – Original document". Worldwide.espacenet.com. 8 August 1978. Archived from the original on 12 March 2017. Retrieved 13 February 2014.
  16. ^ "What is smart card? - Definition from WhatIs.com". SearchSecurity. Archived from the original on 31 May 2022. Retrieved 31 May 2022.
  17. ^ Moneo's website Archived 8 February 2010 at the Wayback Machine (in French).
  18. ^ "EMVco". Archived from the original on 5 June 2020. Retrieved 7 January 2006.
  19. ^ "US learns from Malaysia, 10 years later". The Rakyat Post. Archived from the original on 20 March 2019. Retrieved 30 December 2016.
  20. ^ "A message from CEO Gregg Steinhafel about Target's payment card issues". Archived from the original on 25 February 2021. Retrieved 14 March 2021.
  21. ^ "Target Hack a Tipping Point in Moving Away from Magnetic Stripes". NPR. Archived from the original on 13 April 2021. Retrieved 14 March 2021.
  22. ^ Bernard, Alain. "Electronic telephone device". Google Patents. Archived from the original on 18 March 2022. Retrieved 29 April 2021.
  23. ^ "AudioSmartCard". Infogreffe. French Commercial Court. Archived from the original on 29 April 2021. Retrieved 29 April 2021.
  24. ^ Liau, Yun Qing (8 November 2012). "MasterCard launching banking card with OTP capability". ZDNet. Archived from the original on 6 May 2021. Retrieved 12 May 2021.
  25. ^ GamerStuff (24 January 2012). "CES 2012: Interview Cyril Lalo NagraID Security". Archived from the original on 11 December 2021. Retrieved 12 May 2021 – via YouTube.
  26. ^ "Mastercard, Symantec and NagraID Security team up to provide further payment card security features". nagra.com. 14 February 2011. Archived from the original on 12 May 2021. Retrieved 12 May 2021.
  27. ^ "RSA SecurID SD200 – hardware token Series Specs". CNET. Archived from the original on 12 May 2021. Retrieved 12 May 2021.
  28. ^ Getin Bank (7 June 2013). "Getin Bank – poznaj nową Kartę Display do konta bankowego" (in Polish). Archived from the original on 21 May 2021. Retrieved 21 May 2021 – via YouTube.
  29. ^ D'Albore, Antonio (5–6 October 2017). "The rise of biometric cards" (PDF). International Card Manufacturers Association. Embedded Security News. Archived (PDF) from the original on 26 October 2021. Retrieved 26 October 2021.
  30. ^ "Infogreffe – AudioSmartCard International SA". Infogreffe. French corporate register. Archived from the original on 1 May 2021. Retrieved 12 June 2021.
  31. ^ "Bloomberg – nCryptone". Bloomberg. Archived from the original on 19 October 2021. Retrieved 12 June 2021.
  32. ^ "E Ink". E Ink. Archived from the original on 30 July 2021. Retrieved 12 June 2021.
  33. ^ "Company Information AudioSmartCard International SA". Infogreffe. French Registries at Commercial Courts. Archived from the original on 19 September 2021. Retrieved 16 July 2021.
  34. ^ "Information about Prosodie Corporation". Infogreffe. French commercial court registries. Archived from the original on 8 December 2021. Retrieved 16 July 2021.
  35. ^ "nCryptone Corporate Profile". Bloomberg. Archived from the original on 19 October 2021. Retrieved 16 July 2021.
  36. ^ "CardLab Innovation". CardLab Innovation. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  37. ^ Cipriani, Jason. "Coin adds NFC capabilities to its new all-in-one card". Fortune. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  38. ^ "LinkedIn: Kanishk Parashar". LinkedIn.
  39. ^ Statt, Nick (14 November 2013). "Inside Coin's techie vision for the all-in-one credit card". CNET. Retrieved 11 August 2024.
  40. ^ Statt, Nick. "Coin adds NFC capabilities to its new all-in-one card". CNET. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  41. ^ Cooper, Daniel (18 May 2016). "Fitbit buys Coin to help with mobile payments". Engadget. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  42. ^ Heater, Brian (31 January 2017). "Coin will shut down its product services at the end of February". TechCrunch. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  43. ^ "Ellipse World Inc". Ellipse World Inc. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  44. ^ "Emue Technologies". Emue Technologies. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  45. ^ "LinkedIn: Emue Technologies". LinkedIn. Retrieved 16 July 2021.
  46. ^ "Visa CodeSure gets commercial green light". Finextra. 2 June 2010. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  47. ^ "OTP Display Card". Feitian technologies. Archived from the original on 13 August 2021. Retrieved 16 July 2021.
  48. ^ "Chip Embedded Card". Feitian Technologies. Archived from the original on 24 June 2021. Retrieved 16 July 2021.
  49. ^ "OTP Display Card". Feitian Technologies. Archived from the original on 1 August 2021. Retrieved 16 July 2021.
  50. ^ "Fingerprint Cards". Fingerprint Cards. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  51. ^ "Biometrics: The missing piece of the contactless card puzzle" (PDF). Fingerprint Cards. Archived (PDF) from the original on 16 July 2021. Retrieved 16 July 2021.
  52. ^ "Zwipe Payment Card the World's Leading Biometric Payment Card". Fingerprint Cards. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  53. ^ "Giesecke+Devrient". Giesecke+Devrient. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  54. ^ "Payments". Thales Group – Gemalto. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  55. ^ "EMV Biometric Card". Thales Group – Gemalto. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  56. ^ "SafeNet OTP Display Card". Thales Group – SafeNet. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  57. ^ "Dynamic Code Verification". Thales Group – Gemalto. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  58. ^ "Oberthur Technologies –Morpho becomes IDEMIA, the global leader in trusted identities". Idemia. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  59. ^ "Biometric payment card". Idemia. 17 September 2020. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  60. ^ "Motion Code". Idemia. 13 October 2020. Archived from the original on 22 June 2021. Retrieved 16 July 2021.
  61. ^ "Fingerprint sensor manufacturer". Idex Biometrics. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  62. ^ "What is a fingerprint sensor module?". Idex Biometrics. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  63. ^ "XH Smart Tech showcasing dual-interface biometric card with IDEX sensor at Mobile World Congress in Barcelona". Idex Biometrics. 25 February 2019. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  64. ^ "nCryptone monte au capital d'Innovative Card Technologies" (in French). JDN. 30 June 2006. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  65. ^ "NID". NID. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  66. ^ "Complex Cards". NID. Archived from the original on 18 September 2021. Retrieved 16 July 2021.
  67. ^ "MasterCard and Absa Introduce Next Generation Payment Card, a First for APMEA". MasterCard. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  68. ^ "Philippe Guillaud". Epita. 26 November 2018. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  69. ^ "nCryptone acquiert IC Tech" (in French). Les Echos Investir. 30 June 2006. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  70. ^ "BPCE Group and Oberthur Technologies launch a world-exclusive innovation: the first dynamic cryptogram payment card". BPCE. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  71. ^ "Orange Bank : une carte Visa Premium avec cryptogramme dynamique et Apple Pay" (in French). iGen. 7 March 2019. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  72. ^ "1 million MOTION CODE online transactions with Société Générale". Idemia. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  73. ^ Schubarth, Cromwell (21 April 2017). "Palo Alto 'smart' credit card startup shutters after taking $9M in pre-orders". Biz Journals. Archived from the original on 19 December 2020. Retrieved 16 July 2021.
  74. ^ "Edge Mobile Payments Acquires Plastc Assets". Edge. Retrieved 16 July 2021.
  75. ^ "Edge Mobile Payments". Edge Mobile Payments. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  76. ^ "EDGE Mobile Payments Announces Development of the EDGE Card". EDGE Mobile Payments. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  77. ^ "Stratos". Stratos. Archived from the original on 6 May 2021. Retrieved 16 July 2021.
  78. ^ Cipriani, Jason (13 May 2015). "One card to rule them all? Stratos smart card replaces the need for a wallet". Fortune. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  79. ^ "Stratos Connected Card Platform Acquired by CardLab Innovations". Stratos. Archived from the original on 12 March 2021. Retrieved 16 July 2021.
  80. ^ "Swyp". Swyp. Archived from the original on 28 July 2021. Retrieved 16 July 2021.
  81. ^ Magistretti, Bérénice (31 January 2017). "Mobile payment startup Qvivr raises $5 million led by Khosla Ventures". VentureBeat. Archived from the original on 16 July 2021. Retrieved 16 July 2021.
  82. ^ "MasterCard and Absa Introduce Next Generation Payment Card, a First for APMEA". MasterCard. 28 November 2012. Archived from the original on 16 July 2021. Retrieved 17 July 2021.
  83. ^ "World first for Belgium: Banca Monte Paschi Belgio and MasterCard launch the first payment card combining debit, credit, display screen and contactless payment facilities". MasterCard. 23 October 2012. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  84. ^ "Bank of America unveils SafePass card". Finextra. Finextra. 24 November 2008. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  85. ^ Verdict Staff (21 May 2015). "BPCE, Oberthur to pilot first dynamic cryptogram payment card". Cards International. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  86. ^ "Carpatica Bank launches display card in Romania". Business Review, Romania. 6 December 2011. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  87. ^ "MasterCard Drives Growth in Its Display Card Programme with Bank Launches in Romania". MasterCard. 15 November 2011. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  88. ^ "Erste Maestro PayPass Display Card" (PDF). Erste Bank. Archived (PDF) from the original on 17 July 2021. Retrieved 17 July 2021.
  89. ^ Getin Bank (7 June 2013). "Getin Bank – poznaj nową Kartę Display do konta bankowego" (Video) (in Polish). Archived from the original on 21 May 2021. Retrieved 17 July 2021 – via YouTube.
  90. ^ Grant, Ian (14 June 2010). "Newcastle Banking Society debuts smart display cards". Computer Weekly. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  91. ^ Smith, Josh (4 August 2010). "PayPal security key card – is it worth it?". AOL. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  92. ^ "Taiwan's Bank SinoPac issues credit cards with digital display". Finextra. 14 October 2010. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  93. ^ "1 Million MOTION CODE? Online Transactions With Société Générale". El Economista. 17 October 2017. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  94. ^ Liau, Yun Qing (8 November 2012). "MasterCard launching banking card with OTP capability". ZDNet. Archived from the original on 6 May 2021. Retrieved 12 May 2021.
  95. ^ Parrish, Kevin (8 November 2012). "MasterCard Electronic Display Cards Finally Go Mainstream". Tom's Guide. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  96. ^ "MasterCard, Symantec and NagraID Security team on display card". Finextra. Finextra. 15 February 2011. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  97. ^ "Türk Ekonomi Bankası (TEB) has launched a new digital banking service". CardFlash. 27 April 2015. Archived from the original on 17 July 2021. Retrieved 17 July 2021.
  98. ^ "development of the "KAMICARD" IC card made from recyclable and biodegradable paper". Toppan Printing Company. Archived from the original on 27 February 2009. Retrieved 27 March 2009.
  99. ^ a b c d e f Kiliçli, Tolga (19 September 2001). "Smart Card HOWTO". Archived from the original on 15 June 2009. Retrieved 28 November 2020.
  100. ^ ISO/IEC 7816-2:1999/Amd 1:2004 Assignment of contacts C4 and C8 Archived 15 March 2012 at the Wayback Machine.
  101. ^ ISO/IEC 7816-2:2007. Identification cards – Integrated circuit cards – Part 2: Cards with contacts – Dimensions and location of the contacts Archived 4 March 2016 at the Wayback Machine.
  102. ^ "About Smart Cards: Introduction: Primer". Secure Technology Alliance. Archived from the original on 27 March 2018. Retrieved 7 August 2017.
  103. ^ "Smart Card License System". Archived from the original on 10 April 2009. Retrieved 29 May 2006.
  104. ^ Kumar, Deepak (26 October 2005). ""Smart Card Driving License System in Gujarat"". Urban/Regional. Archived from the original on 4 March 2016. Retrieved 29 October 2015.
  105. ^ "Taalkeuze/Choix de langue fedict.belgium.be". Eid.belgium.be. Archived from the original on 8 February 2014. Retrieved 13 February 2014.
  106. ^ "Diario Turing – Tecnología y sociedad en red". 25 September 2013. Archived from the original on 26 August 2017. Retrieved 25 August 2017.
  107. ^ "¿Qué fue del DNI electrónico?". Archived from the original on 26 August 2017. Retrieved 25 August 2017.
  108. ^ "FRACASO DEL DNI ELECTRONICO". A las pruebas me remito (in Spanish). 4 May 2015. Archived from the original on 5 March 2018. Retrieved 6 June 2018. FAILURE OF THE ELECTRONIC ID
  109. ^ "El DNI electrónico ha muerto: ¡larga vida al DNI 3.0!" (in Spanish). 2 October 2013. Archived from the original on 26 August 2017. Retrieved 25 August 2017. The electronic DNI has died: long live the DNI 3.0!
  110. ^ "Emergency Response Official Credentials: An Approach to Attain Trust in Credentials across Multiple Jurisdictions for Disaster Response and Recovery". 3 January 2011. Archived from the original on 27 January 2013. Retrieved 3 January 2011.
  111. ^ "OMA Newsletter 2007 Volume 2". Archived from the original on 19 July 2012. Retrieved 20 March 2012.
  112. ^ Martin, Christophe (30 June 2010). "Update from SIMalliance on SCWS". Archived from the original on 1 August 2013. Retrieved 20 March 2012.
  113. ^ "OMA Smart Card Web Server (SCWS)". Archived from the original on 1 November 2012. Retrieved 10 June 2021.
  114. ^ "What is "Aime"?". Archived from the original on 20 March 2014. Retrieved 6 August 2017.
  115. ^ "Octopus Card Benefits". Archived from the original on 21 July 2011. Retrieved 31 May 2011.
  116. ^ "Smartcare go". Archived from the original on 9 October 2012. Retrieved 24 September 2012.
  117. ^ "Smart Tickets". Archived from the original on 25 April 2018. Retrieved 24 April 2018.
  118. ^ "Konami Amusement, Sega Interactive, and Bandai Namco Entertainment Agree on Unified System for Arcade Game IC Cards". Archived from the original on 10 June 2020. Retrieved 10 June 2020.
  119. ^ "タイトー、「アミューズメントICカード」規格に参入決定。タイトー対応タイトル第1弾は「ストV タイプアーケード」". 22 January 2019. Archived from the original on 10 June 2020. Retrieved 10 June 2020.
  120. ^ Mozilla certificate store
  121. ^ smartcard Archived 17 September 2012 at the Wayback Machine howto for GNUPG
  122. ^ Varghese, Sam (6 December 2004). "Qld schools benefit from smart cards". The Age. Archived from the original on 6 November 2012. Retrieved 20 May 2011.
  123. ^ CreditCards.com (27 October 2009). "Cashless lunches come to Australian schools". Australia.creditcards.com. Archived from the original on 29 November 2010. Retrieved 13 February 2014.
  124. ^ "News Release – Smart card technology to monitor smart food choices in schools". Ifr.ac.uk. 14 July 2005. Archived from the original on 20 November 2005. Retrieved 13 February 2014.
  125. ^ "Smartcardalliance.org". Archived from the original on 25 March 2009. Retrieved 10 March 2009.
  126. ^ Fernández-Alemán, José Luis; Señor, Inmaculada Carrión; Lozoya, Pedro Ángel Oliver; Toval, Ambrosio (2013). "Security and privacy in electronic health records: A systematic literature review". Journal of Biomedical Informatics. 46 (3). Elsevier BV: 541–562. doi:10.1016/j.jbi.2012.12.003. ISSN 1532-0464. PMID 23305810. Recent years have witnessed the design of standards and the promulgation of directives concerning security and privacy in EHR systems. However, more work should be done to adopt these regulations and to deploy secure EHR systems.
  127. ^ MYKAD SDK
  128. ^ "PVC free". Greepeace. 29 June 2015. Archived from the original on 25 April 2018. Retrieved 24 April 2018.
  129. ^ Bar-El, Hagai. "Known Attacks Against Smartcards" (PDF). Discretix Technologies Ltd. Archived (PDF) from the original on 12 May 2013. Retrieved 20 February 2013.
  130. ^ "Related Initiatives". Home web for The Berlin Group. The Berlin Group. 1 August 2005. Archived from the original on 7 May 2006. Retrieved 20 December 2007.

Further reading

edit
edit