Remington-Beals Pocket Revolver

(Redirected from Remington-Beals 1st Model)

Remington-Beals Pocket Revolver was the first percussion revolver produced by Remington&Sons in 1857. Three successive models were produced in 1857–1860.[1][2][3]

Remington-Beals Pocket Revolver
TypeRevolver
Place of originUnited States
Service history
In service1857–1873
Used byUnited States
Confederate States
WarsAmerican Civil War
American Indian Wars
Production history
DesignerFordyce Beals
Designed1856-1857
ManufacturerRemington Arms
Produced1857 to 1860
No. builtAbout 7,500
Variants3
Specifications
CartridgePowder & ball or Paper cartridge with conical bullet
Caliber.31
ActionSingle-action
Feed system5 round cylinder
SightsFixed Post, Notched Top Strap

Background

edit

Founded in 1816 in Ilion, New York by a blacksmith named Eliphalet Remington, by 1856. Remington&Sons was the preeminent long rifle factory in the United States, producing military rifles for the US government since 1845. The expiration of Samuel Colt’s U.S. patents in 1857 afforded the Remingtons the opportunity to start their own revolver production. As the company had had little experience in the production of pistols, they hired an expert designer, Fordyce Beals, who had previously designed a revolver for Eli Whitney’s factory in 1854. Beals refined his earlier models to provide Remington with his first revolver, Remington-Beals Pocket Revolver, which was patented on May 26, 1857.[1][2][4]

Models

edit

In 1857 the 1st Model Remington-Beals Pocket Revolvers appeared on the US market. However, sales were disappointing, and Remington followed with two more improved models of the pistol, the last mounting an integral loading lever. Despite these improvements, the only real advantage of the Remington-Beals over well established Colt’s pocket revolvers was in its solid-frame design. So, in 1860 Remington ceased the production.[1] It was not until the outbreak of the American Civil War that Remington started revolver production on a large scale, with Remington Army Model in 1861.[4]

1st Model Remington-Beals Revolver

edit

The first model Remington-Beals was a solid frame, single-action, five-shot, caliber .31 pistol with a 3-inch octagonal barrel. As it lacked the loading lever found on Colt’s pistols, a bullet seater was included and had to be carried separately. The pistol was also fitted with grips made of hard rubber, known at the time as gutta percha, very modern for the time.[1] Cylinder turning mechanism was mounted on the left outside frame. Approximately 5,000 were manufactured in 1857 and 1858 before transitioning to the 2nd Model.[2][3]

2nd Model Remington-Beals Revolver

edit

It was a spur trigger, .31-caliber, 5-shot percussion revolver, with 3" octagonal barrel and squared rubber grip. Approximately 1,000 were manufactured between 1858 and 1860.[5]

3rd Model Remington-Beals Revolver

edit

A .31-caliber 5-shot percussion revolver, with 4" octagonal barrel. Unlike it's predecessors, it had a loading lever mounted under the barrel. Approximately 1,500 were manufactured in 1859 and 1860.[1][6]

References

edit
  1. ^ a b c d e Kinard, Jeff (2003). Pistols, An Illustrated History of Their Impact. Santa Barbara, California: ABC-CLIO, Inc. pp. 84–85. ISBN 1-85109-475-X.
  2. ^ a b c "REMINGTON ARMS COMPANY, INC. 1st Model Remington-Beals Revolver :: Gun Values by Gun Digest". gunvalues.gundigest.com. Retrieved 2024-07-17.
  3. ^ a b "NRA Museums:". www.nramuseum.org. Retrieved 2024-07-17.
  4. ^ a b Myatt, Major Frederick (1981). An Ilustrated Guide to Pistols and Revolvers. London: Salamander Books Limited. p. 31. ISBN 0861010973.
  5. ^ "REMINGTON ARMS COMPANY, INC. 2nd Model Remington-Beals Revolver :: Gun Values by Gun Digest". gunvalues.gundigest.com. Retrieved 2024-07-17.
  6. ^ "REMINGTON ARMS COMPANY, INC. 3rd Model Remington-Beals Revolver :: Gun Values by Gun Digest". gunvalues.gundigest.com. Retrieved 2024-07-17.

Literature

edit