Operator (physics)

(Redirected from Operators (physics))

An operator is a function over a space of physical states onto another space of states. The simplest example of the utility of operators is the study of symmetry (which makes the concept of a group useful in this context). Because of this, they are useful tools in classical mechanics. Operators are even more important in quantum mechanics, where they form an intrinsic part of the formulation of the theory.

Operators in classical mechanics

edit

In classical mechanics, the movement of a particle (or system of particles) is completely determined by the Lagrangian   or equivalently the Hamiltonian  , a function of the generalized coordinates q, generalized velocities   and its conjugate momenta:

 

If either L or H is independent of a generalized coordinate q, meaning the L and H do not change when q is changed, which in turn means the dynamics of the particle are still the same even when q changes, the corresponding momenta conjugate to those coordinates will be conserved (this is part of Noether's theorem, and the invariance of motion with respect to the coordinate q is a symmetry). Operators in classical mechanics are related to these symmetries.

More technically, when H is invariant under the action of a certain group of transformations G:

 .

The elements of G are physical operators, which map physical states among themselves.

Table of classical mechanics operators

edit
Transformation Operator Position Momentum
Translational symmetry      
Time translation symmetry      
Rotational invariance      
Galilean transformations      
Parity      
T-symmetry      

where   is the rotation matrix about an axis defined by the unit vector   and angle θ.

Generators

edit

If the transformation is infinitesimal, the operator action should be of the form

 

where   is the identity operator,   is a parameter with a small value, and   will depend on the transformation at hand, and is called a generator of the group. Again, as a simple example, we will derive the generator of the space translations on 1D functions.

As it was stated,  . If   is infinitesimal, then we may write

 

This formula may be rewritten as

 

where   is the generator of the translation group, which in this case happens to be the derivative operator. Thus, it is said that the generator of translations is the derivative.

The exponential map

edit

The whole group may be recovered, under normal circumstances, from the generators, via the exponential map. In the case of the translations the idea works like this.

The translation for a finite value of   may be obtained by repeated application of the infinitesimal translation:

 

with the   standing for the application   times. If   is large, each of the factors may be considered to be infinitesimal:

 

But this limit may be rewritten as an exponential:

 

To be convinced of the validity of this formal expression, we may expand the exponential in a power series:

 

The right-hand side may be rewritten as

 

which is just the Taylor expansion of  , which was our original value for  .

The mathematical properties of physical operators are a topic of great importance in itself. For further information, see C*-algebra and Gelfand–Naimark theorem.

Operators in quantum mechanics

edit

The mathematical formulation of quantum mechanics (QM) is built upon the concept of an operator.

Physical pure states in quantum mechanics are represented as unit-norm vectors (probabilities are normalized to one) in a special complex Hilbert space. Time evolution in this vector space is given by the application of the evolution operator.

Any observable, i.e., any quantity which can be measured in a physical experiment, should be associated with a self-adjoint linear operator. The operators must yield real eigenvalues, since they are values which may come up as the result of the experiment. Mathematically this means the operators must be Hermitian.[1] The probability of each eigenvalue is related to the projection of the physical state on the subspace related to that eigenvalue. See below for mathematical details about Hermitian operators.

In the wave mechanics formulation of QM, the wavefunction varies with space and time, or equivalently momentum and time (see position and momentum space for details), so observables are differential operators.

In the matrix mechanics formulation, the norm of the physical state should stay fixed, so the evolution operator should be unitary, and the operators can be represented as matrices. Any other symmetry, mapping a physical state into another, should keep this restriction.

Wavefunction

edit

The wavefunction must be square-integrable (see Lp spaces), meaning:

 

and normalizable, so that:

 

Two cases of eigenstates (and eigenvalues) are:

  • for discrete eigenstates   forming a discrete basis, so any state is a sum   where ci are complex numbers such that |ci|2 = ci*ci is the probability of measuring the state  , and the corresponding set of eigenvalues ai is also discrete - either finite or countably infinite. In this case, the inner product of two eigenstates is given by  , where   denotes the Kronecker Delta. However,
  • for a continuum of eigenstates   forming a continuous basis, any state is an integral   where c(φ) is a complex function such that |c(φ)|2 = c(φ)*c(φ) is the probability of measuring the state  , and there is an uncountably infinite set of eigenvalues a. In this case, the inner product of two eigenstates is defined as  , where here   denotes the Dirac Delta.

Linear operators in wave mechanics

edit

Let ψ be the wavefunction for a quantum system, and   be any linear operator for some observable A (such as position, momentum, energy, angular momentum etc.). If ψ is an eigenfunction of the operator  , then

 

where a is the eigenvalue of the operator, corresponding to the measured value of the observable, i.e. observable A has a measured value a.

If ψ is an eigenfunction of a given operator  , then a definite quantity (the eigenvalue a) will be observed if a measurement of the observable A is made on the state ψ. Conversely, if ψ is not an eigenfunction of  , then it has no eigenvalue for  , and the observable does not have a single definite value in that case. Instead, measurements of the observable A will yield each eigenvalue with a certain probability (related to the decomposition of ψ relative to the orthonormal eigenbasis of  ).

In bra–ket notation the above can be written;

 

that are equal if   is an eigenvector, or eigenket of the observable A.

Due to linearity, vectors can be defined in any number of dimensions, as each component of the vector acts on the function separately. One mathematical example is the del operator, which is itself a vector (useful in momentum-related quantum operators, in the table below).

An operator in n-dimensional space can be written:

 

where ej are basis vectors corresponding to each component operator Aj. Each component will yield a corresponding eigenvalue  . Acting this on the wave function ψ:

 

in which we have used  

In bra–ket notation:

 

Commutation of operators on Ψ

edit

If two observables A and B have linear operators   and  , the commutator is defined by,

 

The commutator is itself a (composite) operator. Acting the commutator on ψ gives:

 

If ψ is an eigenfunction with eigenvalues a and b for observables A and B respectively, and if the operators commute:

 

then the observables A and B can be measured simultaneously with infinite precision, i.e., uncertainties  ,   simultaneously. ψ is then said to be the simultaneous eigenfunction of A and B. To illustrate this:

 

It shows that measurement of A and B does not cause any shift of state, i.e., initial and final states are same (no disturbance due to measurement). Suppose we measure A to get value a. We then measure B to get the value b. We measure A again. We still get the same value a. Clearly the state (ψ) of the system is not destroyed and so we are able to measure A and B simultaneously with infinite precision.

If the operators do not commute:

 

they cannot be prepared simultaneously to arbitrary precision, and there is an uncertainty relation between the observables

 

even if ψ is an eigenfunction the above relation holds. Notable pairs are position-and-momentum and energy-and-time uncertainty relations, and the angular momenta (spin, orbital and total) about any two orthogonal axes (such as Lx and Ly, or sy and sz, etc.).[2]

Expectation values of operators on Ψ

edit

The expectation value (equivalently the average or mean value) is the average measurement of an observable, for particle in region R. The expectation value   of the operator   is calculated from:[3]

 

This can be generalized to any function F of an operator:

 

An example of F is the 2-fold action of A on ψ, i.e. squaring an operator or doing it twice:

 

Hermitian operators

edit

The definition of a Hermitian operator is:[1]

 

Following from this, in bra–ket notation:

 

Important properties of Hermitian operators include:

  • real eigenvalues,
  • eigenvectors with different eigenvalues are orthogonal,
  • eigenvectors can be chosen to be a complete orthonormal basis,

Operators in matrix mechanics

edit

An operator can be written in matrix form to map one basis vector to another. Since the operators are linear, the matrix is a linear transformation (aka transition matrix) between bases. Each basis element   can be connected to another,[3] by the expression:

 

which is a matrix element:

 

A further property of a Hermitian operator is that eigenfunctions corresponding to different eigenvalues are orthogonal.[1] In matrix form, operators allow real eigenvalues to be found, corresponding to measurements. Orthogonality allows a suitable basis set of vectors to represent the state of the quantum system. The eigenvalues of the operator are also evaluated in the same way as for the square matrix, by solving the characteristic polynomial:

 

where I is the n × n identity matrix, as an operator it corresponds to the identity operator. For a discrete basis:

 

while for a continuous basis:

 

Inverse of an operator

edit

A non-singular operator   has an inverse   defined by:

 

If an operator has no inverse, it is a singular operator. In a finite-dimensional space, an operator is non-singular if and only if its determinant is nonzero:

 

and hence the determinant is zero for a singular operator.

Table of QM operators

edit

The operators used in quantum mechanics are collected in the table below (see for example[1][4]). The bold-face vectors with circumflexes are not unit vectors, they are 3-vector operators; all three spatial components taken together.

Operator (common name/s) Cartesian component General definition SI unit Dimension
Position     m [L]
Momentum General

 

General

 

J s m−1 = N s [M] [L] [T]−1
Electromagnetic field

 

Electromagnetic field (uses kinetic momentum; A, vector potential)

 

J s m−1 = N s [M] [L] [T]−1
Kinetic energy Translation

 

 

J [M] [L]2 [T]−2
Electromagnetic field

 

Electromagnetic field (A, vector potential)

 

J [M] [L]2 [T]−2
Rotation (I, moment of inertia)

 

Rotation

 [citation needed]

J [M] [L]2 [T]−2
Potential energy N/A   J [M] [L]2 [T]−2
Total energy N/A Time-dependent potential:

 

Time-independent:
 

J [M] [L]2 [T]−2
Hamiltonian   J [M] [L]2 [T]−2
Angular momentum operator     J s = N s m [M] [L]2 [T]−1
Spin angular momentum  

where

 

are the Pauli matrices for spin-1/2 particles.

 

where σ is the vector whose components are the Pauli matrices.

J s = N s m [M] [L]2 [T]−1
Total angular momentum     J s = N s m [M] [L]2 [T]−1
Transition dipole moment (electric)     C m [I] [T] [L]

Examples of applying quantum operators

edit

The procedure for extracting information from a wave function is as follows. Consider the momentum p of a particle as an example. The momentum operator in position basis in one dimension is:

 

Letting this act on ψ we obtain:

 

if ψ is an eigenfunction of  , then the momentum eigenvalue p is the value of the particle's momentum, found by:

 

For three dimensions the momentum operator uses the nabla operator to become:

 

In Cartesian coordinates (using the standard Cartesian basis vectors ex, ey, ez) this can be written;

 

that is:

 

The process of finding eigenvalues is the same. Since this is a vector and operator equation, if ψ is an eigenfunction, then each component of the momentum operator will have an eigenvalue corresponding to that component of momentum. Acting   on ψ obtains:

 

See also

edit

References

edit
  1. ^ a b c d Molecular Quantum Mechanics Parts I and II: An Introduction to Quantum Chemistry (Volume 1), P.W. Atkins, Oxford University Press, 1977, ISBN 0-19-855129-0
  2. ^ Ballentine, L. E. (1970), "The Statistical Interpretation of Quantum Mechanics", Reviews of Modern Physics, 42 (4): 358–381, Bibcode:1970RvMP...42..358B, doi:10.1103/RevModPhys.42.358
  3. ^ a b Quantum Mechanics Demystified, D. McMahon, Mc Graw Hill (USA), 2006, ISBN 0-07-145546-9
  4. ^ Operators - The Feynman Lectures on Physics