NILFS or NILFS2 (New Implementation of a Log-structured File System) is a log-structured file system implementation for the Linux kernel. It was developed by Nippon Telegraph and Telephone Corporation (NTT) CyberSpace Laboratories and a community from all over the world. NILFS was released under the terms of the GNU General Public License (GPL).

NILFS
Developer(s)Nippon Telegraph and Telephone Cyber Space Laboratories
Full nameNew Implementation of a Log-structured File System
Introduced2005; 19 years ago (2005) with Linux kernel 2.6.13
Structures
File allocationB-tree
Limits
Max volume size8 EiB
Max file size8 EiB
Max filename length255 bytes
Features
Dates recordedatime (planned)
Date resolution64-bit on-disk timestamps
AttributesPOSIX, with plans for extended attributes
File system
permissions
POSIX, with plans for ACLs[1]
Transparent
compression
No
Transparent
encryption
No
Copy-on-writeYes
Other
Supported
operating systems
Linux kernel, (ReadOnly for NetBSD)

Design

edit

"NILFS is a log-structured file system, in that the storage medium is treated like a circular buffer and new blocks are always written to the end.[…]Log-structured file systems are often used for flash media since they will naturally perform wear-leveling;[…]NILFS emphasizes snapshots. The log-structured approach is a specific form of copy-on-write behavior, so it naturally lends itself to the creation of file system snapshots. The NILFS developers talk about the creation of "continuous snapshots" which can be used to recover from user-initiated file system problems[…]."[2]

Using a copy-on-write technique known as a log-structured file system, NILFS records all data in a continuous log-like format that is only appended to, never overwritten, an approach that is designed to reduce seek times, as well as minimize the kind of data loss that occurs after a crash with conventional file systems. For example, data loss occurs on ext3 file systems when the system crashes during a write operation. When the system reboots, the journal notes that the write did not complete, and any partial data writes are lost.

Some file systems, like UFS-derived file systems used by the Solaris operating system and BSDs, provide a snapshot feature that prevents[citation needed] such data loss, but the snapshot configuration can be lengthy on large file systems. NILFS, in contrast, can "continuously and automatically [save] instantaneous states of the file system without interrupting service", according to NTT Labs.[3]

The "instantaneous states" that NILFS continuously saves can actually be mounted, read-only, at the same time that the actual file system is mounted read-write — a capability useful for data recovery after hardware failures and other system crashes. The "lscp" (list checkpoint) command of an interactive NILFS "inspect" utility is first used to find the checkpoint's address, in this case "2048":

# inspect /dev/sda2
...
nilfs> listcp
   1     6 Tue Jul 12 14:55:57 2005 MajorCP|LogiBegin|LogiEnd
2048  2352 Tue Jul 12 14:55:58 2005 MajorCP|LogiEnd
...
nilfs> quit

The checkpoint address is then used to mount the checkpoint:

# mount -t nilfs -r -o cp=2048 /dev/sda2 /nilfs-cp
# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda2             70332412   8044540  62283776  12% /nilfs
/dev/sda2             70332412   8044540  62283776  12% /nilfs-cp

Features

edit

NILFS provides continuous snapshotting. In addition to the versioning capability of the entire file system, users can even restore files mistakenly overwritten or deleted at any recent time. Since NILFS can keep consistency like conventional LFS, it achieves quick recovery after system crashes.

Continuous snapshotting is not provided by most file systems, including those supporting point-in-time snapshotting (e.g. Btrfs)

NILFS creates a number of checkpoints every few seconds or per synchronous write basis (unless there is no change). Users can select significant versions among continuously created checkpoints, and can change them into snapshots which will be preserved until they are changed back to checkpoints.

There is no limit on the number of snapshots until the volume gets full. Each snapshot is mountable as a read-only file system. It is mountable concurrently with a writable mount and other snapshots, and this feature is convenient for making consistent backups during use.

Possible uses of NILFS include versioning, tamper detection, SOX compliance logging, data loss recovery.

The current major version of NILFS is version 2, referred to as NILFS2. NILFS2 implements online garbage collection to reclaim disk space while keeping multiple snapshots.

Other NILFS features include:

  • B-tree based file and inode management.
  • Immediate recovery after system crash.
  • 64-bit data structures; support many files, large files and disks.
  • 64-bit on-disk timestamps which are free of the year 2038 problem.

Current status

edit

Issues

edit

As of 2023, NILFS lacks a dedicated consistency checking utility (fsck), and thus can't recover from severe errors that cause it to fail to find a valid checkpoint.[4][5]

Supported features

edit
  • Basic POSIX file system features
  • Snapshots
    • Automatically and continuously taken
    • No limit on the number of snapshots until the volume gets full
    • Mountable as read-only file systems
    • Mountable concurrently with the writable mount (convenient to make consistent backups during use)
    • Quick listing
  • Background Garbage Collection (GC)
    • Can maintain multiple snapshots
    • Selectable GC Policy, which is given by a userland daemon.
  • Quick crash recovery on-mount
  • Read-ahead for meta data files as well as data files
  • Block sizes smaller than page size (e.g. 1KB or 2KB)
  • Online resizing (since Linux-3.x and nilfs-utils 2.1)
  • Related utilities (by contribution of Jiro SEKIBA)

Additional features

edit
  • Fast write and recovery times
  • Minimal damage to file data and system consistency on hardware failure
  • Internal data is processed in 64-bit wide word size
  • Can create and store huge files (8 EiB)

Compatibility

edit

NILFS is available in various GNU/Linux distributions like Arch Linux,[8] Debian[9] (since version 5.0), Fedora, Gentoo,[10] Linux Mint, NixOS, Ubuntu (since version 9.10), etc. To use it, users typically need to install the nilfs-utils or nilfs-tools package. A boot-cd with NILFS is also available on PrRescue.

It is also supported by partition-editing applications like GParted.[11]

A separate, BSD licensed implementation, currently with read-only support, is included in NetBSD.[12]

Relative performance

edit

In the January 2015 presentation SD cards and file systems for embedded systems at Linux.conf.au, it was stated:[13]

If you've got a workload that's latency sensitive, you might want to use NILFS. If you've got one that's throughput sensitive, you might want to use F2FS.

— Peter Chubb

NILFS2 works much better for the lots of small files case than F2FS or EXT4.

— Peter Chubb

License

edit

The NILFS2 file system utilities are made available under the GNU General Public License version 2, with the exception of the lib/nilfs libraries and their header files, which are made available under the GNU Lesser General Public License Version 2.1.

Developers

edit

The Japanese primary authors and major contributors to the nilfs-utils who worked or are working at labs of NTT Corporation are:

  • Ryusuke Konishi (Primary maintainer, 02/2008–Present)
  • Koji Sato
  • Naruhiko Kamimura
  • Seiji Kihara
  • Yoshiji Amagai
  • Hisashi Hifumi and
  • Satoshi Moriai.

Other major contributors are:

  • Andreas Rohner[14]
  • Dan McGee
  • David Arendt
  • David Smid
  • dexen deVries
  • Dmitry Smirnov
  • Eric Sandeen
  • Jiro SEKIBA
  • Matteo Frigo
  • Hitoshi Mitake
  • Takashi Iwai
  • Vyacheslav Dubeyko

See also

edit

References

edit
  1. ^ "NILFS Current Status".
  2. ^ "BTRFS and NILFS [LWN.net]".
  3. ^ "An article about NILFS". Retrieved 2008-07-28.
  4. ^ Corrupted NILFS2 partition (/var) - Opinions on a better FS for /var?
  5. ^ Kernel archives: Can't mount nilfs - error searching super root.
  6. ^ the NILFS version 1: overview
  7. ^ does not verify: Re: Does nilfs2 checksum all data?; kernel 4.4.38-v7+ does not verify, too.
  8. ^ "Arch Linux - nilfs-utils 2.2.9-1 (X86_64)".
  9. ^ "Debian -- Details of package nilfs-tools in bullseye".
  10. ^ "Sys-fs/Nilfs-utils – Gentoo Packages".
  11. ^ "GParted -- Features".
  12. ^ NiLFS(2) source commit
  13. ^ Peter Chubb. "SD cards and filesystems for embedded systems". Linux.conf.au.
  14. ^ https://www.complang.tuwien.ac.at/Diplomarbeiten/rohner18.pdf [bare URL PDF]
edit