In mathematics, specifically in differential topology, Morse theory enables one to analyze the topology of a manifold by studying differentiable functions on that manifold. According to the basic insights of Marston Morse, a typical differentiable function on a manifold will reflect the topology quite directly. Morse theory allows one to find CW structures and handle decompositions on manifolds and to obtain substantial information about their homology.

Before Morse, Arthur Cayley and James Clerk Maxwell had developed some of the ideas of Morse theory in the context of topography. Morse originally applied his theory to geodesics (critical points of the energy functional on the space of paths). These techniques were used in Raoul Bott's proof of his periodicity theorem.

The analogue of Morse theory for complex manifolds is Picard–Lefschetz theory.

Basic concepts edit

 
A saddle point

To illustrate, consider a mountainous landscape surface   (more generally, a manifold). If   is the function   giving the elevation of each point, then the inverse image of a point in   is a contour line (more generally, a level set). Each connected component of a contour line is either a point, a simple closed curve, or a closed curve with a double point. Contour lines may also have points of higher order (triple points, etc.), but these are unstable and may be removed by a slight deformation of the landscape. Double points in contour lines occur at saddle points, or passes, where the surrounding landscape curves up in one direction and down in the other.

 
Contour lines around a saddle point

Imagine flooding this landscape with water. When the water reaches elevation  , the underwater surface is  , the points with elevation   or below. Consider how the topology of this surface changes as the water rises. It appears unchanged except when   passes the height of a critical point, where the gradient of   is   (more generally, the Jacobian matrix acting as a linear map between tangent spaces does not have maximal rank). In other words, the topology of   does not change except when the water either (1) starts filling a basin, (2) covers a saddle (a mountain pass), or (3) submerges a peak.

 
The torus

To these three types of critical points—basins, passes, and peaks (i.e. minima, saddles, and maxima)—one associates a number called the index, the number of independent directions in which   decreases from the point. More precisely, the index of a non-degenerate critical point   of   is the dimension of the largest subspace of the tangent space to   at   on which the Hessian of   is negative definite. The indices of basins, passes, and peaks are   and   respectively.

Considering a more general surface, let   be a torus oriented as in the picture, with   again taking a point to its height above the plane. One can again analyze how the topology of the underwater surface   changes as the water level   rises.

 
A cylinder (upper right), formed by   when  , is homotopy equivalent to a 1-cell attached to a disk (lower left).
 
A torus with a disk removed (upper right), formed by   when  , is homotopy equivalent to a 1-cell attached to a cylinder (lower left).

Starting from the bottom of the torus, let   and   be the four critical points of index   and   corresponding to the basin, two saddles, and peak, respectively. When   is less than   then   is the empty set. After   passes the level of   when   then   is a disk, which is homotopy equivalent to a point (a 0-cell) which has been "attached" to the empty set. Next, when   exceeds the level of   and   then   is a cylinder, and is homotopy equivalent to a disk with a 1-cell attached (image at left). Once   passes the level of   and   then   is a torus with a disk removed, which is homotopy equivalent to a cylinder with a 1-cell attached (image at right). Finally, when   is greater than the critical level of     is a torus, i.e. a torus with a disk (a 2-cell) removed and re-attached.

This illustrates the following rule: the topology of   does not change except when   passes the height of a critical point; at this point, a  -cell is attached to  , where   is the index of the point. This does not address what happens when two critical points are at the same height, which can be resolved by a slight perturbation of   In the case of a landscape or a manifold embedded in Euclidean space, this perturbation might simply be tilting slightly, rotating the coordinate system.

One must take care to make the critical points non-degenerate. To see what can pose a problem, let   and let   Then   is a critical point of   but the topology of   does not change when   passes   The problem is that the second derivative is  —that is, the Hessian of   vanishes and the critical point is degenerate. This situation is unstable, since by slightly deforming   to  , the degenerate critical point is either removed ( ) or breaks up into two non-degenerate critical points ( ).

Formal development edit

For a real-valued smooth function   on a differentiable manifold   the points where the differential of   vanishes are called critical points of   and their images under   are called critical values. If at a critical point   the matrix of second partial derivatives (the Hessian matrix) is non-singular, then   is called a non-degenerate critical point; if the Hessian is singular then   is a degenerate critical point.

For the functions

 
from   to     has a critical point at the origin if   which is non-degenerate if   (that is,   is of the form  ) and degenerate if   (that is,   is of the form  ). A less trivial example of a degenerate critical point is the origin of the monkey saddle.

The index of a non-degenerate critical point   of   is the dimension of the largest subspace of the tangent space to   at   on which the Hessian is negative definite. This corresponds to the intuitive notion that the index is the number of directions in which   decreases. The degeneracy and index of a critical point are independent of the choice of the local coordinate system used, as shown by Sylvester's Law.

Morse lemma edit

Let   be a non-degenerate critical point of   Then there exists a chart   in a neighborhood   of   such that   for all   and

 
throughout   Here   is equal to the index of   at  . As a corollary of the Morse lemma, one sees that non-degenerate critical points are isolated. (Regarding an extension to the complex domain see Complex Morse Lemma. For a generalization, see Morse–Palais lemma).

Fundamental theorems edit

A smooth real-valued function on a manifold   is a Morse function if it has no degenerate critical points. A basic result of Morse theory says that almost all functions are Morse functions. Technically, the Morse functions form an open, dense subset of all smooth functions   in the   topology. This is sometimes expressed as "a typical function is Morse" or "a generic function is Morse".

As indicated before, we are interested in the question of when the topology of   changes as   varies. Half of the answer to this question is given by the following theorem.

Theorem. Suppose   is a smooth real-valued function on       is compact, and there are no critical values between   and   Then   is diffeomorphic to   and   deformation retracts onto  

It is also of interest to know how the topology of   changes when   passes a critical point. The following theorem answers that question.

Theorem. Suppose   is a smooth real-valued function on   and   is a non-degenerate critical point of   of index   and that   Suppose   is compact and contains no critical points besides   Then   is homotopy equivalent to   with a  -cell attached.

These results generalize and formalize the 'rule' stated in the previous section.

Using the two previous results and the fact that there exists a Morse function on any differentiable manifold, one can prove that any differentiable manifold is a CW complex with an  -cell for each critical point of index   To do this, one needs the technical fact that one can arrange to have a single critical point on each critical level, which is usually proven by using gradient-like vector fields to rearrange the critical points.

Morse inequalities edit

Morse theory can be used to prove some strong results on the homology of manifolds. The number of critical points of index   of   is equal to the number of   cells in the CW structure on   obtained from "climbing"   Using the fact that the alternating sum of the ranks of the homology groups of a topological space is equal to the alternating sum of the ranks of the chain groups from which the homology is computed, then by using the cellular chain groups (see cellular homology) it is clear that the Euler characteristic   is equal to the sum

 
where   is the number of critical points of index   Also by cellular homology, the rank of the  th homology group of a CW complex   is less than or equal to the number of  -cells in   Therefore, the rank of the  th homology group, that is, the Betti number  , is less than or equal to the number of critical points of index   of a Morse function on   These facts can be strengthened to obtain the Morse inequalities:
 

In particular, for any

 
one has
 

This gives a powerful tool to study manifold topology. Suppose on a closed manifold there exists a Morse function   with precisely k critical points. In what way does the existence of the function   restrict  ? The case   was studied by Georges Reeb in 1952; the Reeb sphere theorem states that   is homeomorphic to a sphere   The case   is possible only in a small number of low dimensions, and M is homeomorphic to an Eells–Kuiper manifold. In 1982 Edward Witten developed an analytic approach to the Morse inequalities by considering the de Rham complex for the perturbed operator  [1][2]

Application to classification of closed 2-manifolds edit

Morse theory has been used to classify closed 2-manifolds up to diffeomorphism. If   is oriented, then   is classified by its genus   and is diffeomorphic to a sphere with   handles: thus if     is diffeomorphic to the 2-sphere; and if     is diffeomorphic to the connected sum of   2-tori. If   is unorientable, it is classified by a number   and is diffeomorphic to the connected sum of   real projective spaces   In particular two closed 2-manifolds are homeomorphic if and only if they are diffeomorphic.[3][4][5]

Morse homology edit

Morse homology is a particularly easy way to understand the homology of smooth manifolds. It is defined using a generic choice of Morse function and Riemannian metric. The basic theorem is that the resulting homology is an invariant of the manifold (that is, independent of the function and metric) and isomorphic to the singular homology of the manifold; this implies that the Morse and singular Betti numbers agree and gives an immediate proof of the Morse inequalities. An infinite dimensional analog of Morse homology in symplectic geometry is known as Floer homology.

Morse–Bott theory edit

The notion of a Morse function can be generalized to consider functions that have nondegenerate manifolds of critical points. A Morse–Bott function is a smooth function on a manifold whose critical set is a closed submanifold and whose Hessian is non-degenerate in the normal direction. (Equivalently, the kernel of the Hessian at a critical point equals the tangent space to the critical submanifold.) A Morse function is the special case where the critical manifolds are zero-dimensional (so the Hessian at critical points is non-degenerate in every direction, that is, has no kernel).

The index is most naturally thought of as a pair

 
where   is the dimension of the unstable manifold at a given point of the critical manifold, and   is equal to   plus the dimension of the critical manifold. If the Morse–Bott function is perturbed by a small function on the critical locus, the index of all critical points of the perturbed function on a critical manifold of the unperturbed function will lie between   and  

Morse–Bott functions are useful because generic Morse functions are difficult to work with; the functions one can visualize, and with which one can easily calculate, typically have symmetries. They often lead to positive-dimensional critical manifolds. Raoul Bott used Morse–Bott theory in his original proof of the Bott periodicity theorem.

Round functions are examples of Morse–Bott functions, where the critical sets are (disjoint unions of) circles.

Morse homology can also be formulated for Morse–Bott functions; the differential in Morse–Bott homology is computed by a spectral sequence. Frederic Bourgeois sketched an approach in the course of his work on a Morse–Bott version of symplectic field theory, but this work was never published due to substantial analytic difficulties.

See also edit

References edit

  1. ^ Witten, Edward (1982). "Supersymmetry and Morse theory". J. Differential Geom. 17 (4): 661–692. doi:10.4310/jdg/1214437492.
  2. ^ Roe, John (1998). Elliptic Operators, Topology and Asymptotic Method. Pitman Research Notes in Mathematics Series. Vol. 395 (2nd ed.). Longman. ISBN 0582325021.
  3. ^ Smale 1994[full citation needed]
  4. ^ Gauld, David B. (1982). Differential Topology: an Introduction. Monographs and Textbooks in Pure and Applied Mathematics. Vol. 72. Marcel Dekker. ISBN 0824717090.
  5. ^ Shastri, Anant R. (2011). Elements of Differential Topology. CRC Press. ISBN 9781439831601.

Further reading edit