Integer programming

(Redirected from Integer constraint)

An integer programming problem is a mathematical optimization or feasibility program in which some or all of the variables are restricted to be integers. In many settings the term refers to integer linear programming (ILP), in which the objective function and the constraints (other than the integer constraints) are linear.

Integer programming is NP-complete. In particular, the special case of 0–1 integer linear programming, in which unknowns are binary, and only the restrictions must be satisfied, is one of Karp's 21 NP-complete problems.[1]

If some decision variables are not discrete, the problem is known as a mixed-integer programming problem.[2]

Canonical and standard form for ILPs

edit

In integer linear programming, the canonical form is distinct from the standard form. An integer linear program in canonical form is expressed thus (note that it is the   vector which is to be decided):[3]

 

and an ILP in standard form is expressed as

 

where   are vectors and   is a matrix. As with linear programs, ILPs not in standard form can be converted to standard form by eliminating inequalities, introducing slack variables ( ) and replacing variables that are not sign-constrained with the difference of two sign-constrained variables.

Example

edit
 
IP polytope with LP relaxation

The plot on the right shows the following problem.

 

The feasible integer points are shown in red, and the red dashed lines indicate their convex hull, which is the smallest convex polyhedron that contains all of these points. The blue lines together with the coordinate axes define the polyhedron of the LP relaxation, which is given by the inequalities without the integrality constraint. The goal of the optimization is to move the black dashed line as far upward while still touching the polyhedron. The optimal solutions of the integer problem are the points   and   that both have an objective value of 2. The unique optimum of the relaxation is   with objective value of 2.8. If the solution of the relaxation is rounded to the nearest integers, it is not feasible for the ILP.

Proof of NP-hardness

edit

The following is a reduction from minimum vertex cover to integer programming that will serve as the proof of NP-hardness.

Let   be an undirected graph. Define a linear program as follows:

 

Given that the constraints limit   to either 0 or 1, any feasible solution to the integer program is a subset of vertices. The first constraint implies that at least one end point of every edge is included in this subset. Therefore, the solution describes a vertex cover. Additionally given some vertex cover C,   can be set to 1 for any   and to 0 for any   thus giving us a feasible solution to the integer program. Thus we can conclude that if we minimize the sum of   we have also found the minimum vertex cover.[4]

Variants

edit

Mixed-integer linear programming (MILP) involves problems in which only some of the variables,  , are constrained to be integers, while other variables are allowed to be non-integers.

Zero–one linear programming (or binary integer programming) involves problems in which the variables are restricted to be either 0 or 1. Any bounded integer variable can be expressed as a combination of binary variables.[5] For example, given an integer variable,  , the variable can be expressed using   binary variables:

 

Applications

edit

There are two main reasons for using integer variables when modeling problems as a linear program:

  1. The integer variables represent quantities that can only be integer. For example, it is not possible to build 3.7 cars.
  2. The integer variables represent decisions (e.g. whether to include an edge in a graph) and so should only take on the value 0 or 1.

These considerations occur frequently in practice and so integer linear programming can be used in many applications areas, some of which are briefly described below.

Production planning

edit

Mixed-integer programming has many applications in industrial productions, including job-shop modelling. One important example happens in agricultural production planning and involves determining production yield for several crops that can share resources (e.g. land, labor, capital, seeds, fertilizer, etc.). A possible objective is to maximize the total production, without exceeding the available resources. In some cases, this can be expressed in terms of a linear program, but the variables must be constrained to be integer.

Scheduling

edit

These problems involve service and vehicle scheduling in transportation networks. For example, a problem may involve assigning buses or subways to individual routes so that a timetable can be met, and also to equip them with drivers. Here binary decision variables indicate whether a bus or subway is assigned to a route and whether a driver is assigned to a particular train or subway. The zero–one programming technique has been successfully applied to solve a project selection problem in which projects are mutually exclusive and/or technologically interdependent. It is used in a special case of integer programming, in which all the decision variables are integers. Variable can assume only the values zero or one.

Territorial partitioning

edit

Territorial partitioning or districting problems consist of partitioning a geographical region into districts in order to plan some operations while considering different criteria or constraints. Some requirements for this problem are: contiguity, compactness, balance or equity, respect of natural boundaries, and socio-economic homogeneity. Some applications for this type of problem include: political districting, school districting, health services districting and waste management districting.

Telecommunications networks

edit

The goal of these problems is to design a network of lines to install so that a predefined set of communication requirements are met and the total cost of the network is minimal.[6] This requires optimizing both the topology of the network along with setting the capacities of the various lines. In many cases, the capacities are constrained to be integer quantities. Usually there are, depending on the technology used, additional restrictions that can be modeled as linear inequalities with integer or binary variables.

Cellular networks

edit

The task of frequency planning in GSM mobile networks involves distributing available frequencies across the antennas so that users can be served and interference is minimized between the antennas.[7] This problem can be formulated as an integer linear program in which binary variables indicate whether a frequency is assigned to an antenna.

Other applications

edit

Algorithms

edit

The naive way to solve an ILP is to simply remove the constraint that x is integer, solve the corresponding LP (called the LP relaxation of the ILP), and then round the entries of the solution to the LP relaxation. But, not only may this solution not be optimal, it may not even be feasible; that is, it may violate some constraint.

Using total unimodularity

edit

While in general the solution to LP relaxation will not be guaranteed to be integral, if the ILP has the form   such that   where   and   have all integer entries and   is totally unimodular, then every basic feasible solution is integral. Consequently, the solution returned by the simplex algorithm is guaranteed to be integral. To show that every basic feasible solution is integral, let   be an arbitrary basic feasible solution . Since   is feasible, we know that  . Let   be the elements corresponding to the basis columns for the basic solution  . By definition of a basis, there is some square submatrix   of   with linearly independent columns such that  .

Since the columns of   are linearly independent and   is square,   is nonsingular, and therefore by assumption,   is unimodular and so  . Also, since   is nonsingular, it is invertible and therefore  . By definition,  . Here   denotes the adjugate of   and is integral because   is integral. Therefore,   Thus, if the matrix   of an ILP is totally unimodular, rather than use an ILP algorithm, the simplex method can be used to solve the LP relaxation and the solution will be integer.

Exact algorithms

edit

When the matrix   is not totally unimodular, there are a variety of algorithms that can be used to solve integer linear programs exactly. One class of algorithms are cutting plane methods, which work by solving the LP relaxation and then adding linear constraints that drive the solution towards being integer without excluding any integer feasible points.

Another class of algorithms are variants of the branch and bound method. For example, the branch and cut method that combines both branch and bound and cutting plane methods. Branch and bound algorithms have a number of advantages over algorithms that only use cutting planes. One advantage is that the algorithms can be terminated early and as long as at least one integral solution has been found, a feasible, although not necessarily optimal, solution can be returned. Further, the solutions of the LP relaxations can be used to provide a worst-case estimate of how far from optimality the returned solution is. Finally, branch and bound methods can be used to return multiple optimal solutions.

Exact algorithms for a small number of variables

edit

Suppose   is an m-by-n integer matrix and   is an m-by-1 integer vector. We focus on the feasibility problem, which is to decide whether there exists an n-by-1 vector   satisfying  .

Let V be the maximum absolute value of the coefficients in   and  . If n (the number of variables) is a fixed constant, then the feasibility problem can be solved in time polynomial in m and log V. This is trivial for the case n=1. The case n=2 was solved in 1981 by Herbert Scarf.[13] The general case was solved in 1983 by Hendrik Lenstra, combining ideas by László Lovász and Peter van Emde Boas.[14] Doignon's theorem asserts that an integer program is feasible whenever every subset of   constraints is feasible; a method combining this result with algorithms for LP-type problems can be used to solve integer programs in time that is linear in   and fixed-parameter tractable (FPT) in  , but possibly doubly exponential in  , with no dependence on  .[15]

In the special case of 0-1 ILP, Lenstra's algorithm is equivalent to complete enumeration: the number of all possible solutions is fixed (2n), and checking the feasibility of each solution can be done in time poly(m, log V). In the general case, where each variable can be an arbitrary integer, complete enumeration is impossible. Here, Lenstra's algorithm uses ideas from Geometry of numbers. It transforms the original problem into an equivalent one with the following property: either the existence of a solution   is obvious, or the value of   (the n-th variable) belongs to an interval whose length is bounded by a function of n. In the latter case, the problem is reduced to a bounded number of lower-dimensional problems. The run-time complexity of the algorithm has been improved in several steps:

  • The original algorithm of Lenstra[14] had run-time  .
  • Kannan[16] presented an improved algorithm with run-time  .[17]
  • Frank and Tardos[18] presented an improved algorithm with run-time  .[19][20]: Prop.8 
  • Dadush[21] presented an improved algorithm with run-time  .
  • Reis and Rothvoss[22] presented an improved algorithm with run-time  .

These algorithms can also be used for mixed integer linear programs (MILP) - programs in which some variables are integer and some variables are real.[23] The original algorithm of Lenstra[14]: Sec.5  has run-time  , where n is the number of integer variables, d is the number of continuous variables, and L is the binary encoding size of the problem. Using techniques from later algorithms, the factor   can be improved to   or to  .[23]

Heuristic methods

edit

Since integer linear programming is NP-hard, many problem instances are intractable and so heuristic methods must be used instead. For example, tabu search can be used to search for solutions to ILPs.[24] To use tabu search to solve ILPs, moves can be defined as incrementing or decrementing an integer constrained variable of a feasible solution while keeping all other integer-constrained variables constant. The unrestricted variables are then solved for. Short-term memory can consist of previously tried solutions while medium-term memory can consist of values for the integer constrained variables that have resulted in high objective values (assuming the ILP is a maximization problem). Finally, long-term memory can guide the search towards integer values that have not previously been tried.

Other heuristic methods that can be applied to ILPs include

There are also a variety of other problem-specific heuristics, such as the k-opt heuristic for the traveling salesman problem. A disadvantage of heuristic methods is that if they fail to find a solution, it cannot be determined whether it is because there is no feasible solution or whether the algorithm simply was unable to find one. Further, it is usually impossible to quantify how close to optimal a solution returned by these methods are.

Sparse integer programming

edit

It is often the case that the matrix   that defines the integer program is sparse. In particular, this occurs when the matrix has a block structure, which is the case in many applications. The sparsity of the matrix can be measured as follows. The graph of   has vertices corresponding to columns of  , and two columns form an edge if   has a row where both columns have nonzero entries. Equivalently, the vertices correspond to variables, and two variables form an edge if they share an inequality. The sparsity measure   of   is the minimum of the tree-depth of the graph of   and the tree-depth of the graph of the transpose of  . Let   be the numeric measure of   defined as the maximum absolute value of any entry of  . Let   be the number of variables of the integer program. Then it was shown in 2018[25] that integer programming can be solved in strongly polynomial and fixed-parameter tractable time parameterized by   and  . That is, for some computable function   and some constant  , integer programming can be solved in time  . In particular, the time is independent of the right-hand side   and objective function  . Moreover, in contrast to the classical result of Lenstra, where the number   of variables is a parameter, here the number   of variables is a variable part of the input.

See also

edit

References

edit
  1. ^ Karp, Richard M. (1972). "Reducibility among Combinatorial Problems" (PDF). In R. E. Miller; J. W. Thatcher; J.D. Bohlinger (eds.). Complexity of Computer Computations. New York: Plenum. pp. 85–103. doi:10.1007/978-1-4684-2001-2_9. ISBN 978-1-4684-2003-6.
  2. ^ "Mixed-Integer Linear Programming (MILP): Model Formulation" (PDF). Retrieved 16 April 2018.
  3. ^ Papadimitriou, C. H.; Steiglitz, K. (1998). Combinatorial optimization: algorithms and complexity. Mineola, NY: Dover. ISBN 0486402584.
  4. ^ Erickson, J. (2015). "Integer Programming Reduction" (PDF). Archived from the original (PDF) on 18 May 2015.
  5. ^ Williams, H.P. (2009). Logic and integer programming. International Series in Operations Research & Management Science. Vol. 130. ISBN 978-0-387-92280-5.
  6. ^ Borndörfer, R.; Grötschel, M. (2012). "Designing telecommunication networks by integer programming" (PDF).
  7. ^ Sharma, Deepak (2010). "Frequency Planning".
  8. ^ Morais, Hugo; Kádár, Péter; Faria, Pedro; Vale, Zita A.; Khodr, H. M. (2010-01-01). "Optimal scheduling of a renewable micro-grid in an isolated load area using mixed-integer linear programming". Renewable Energy. 35 (1): 151–156. Bibcode:2010REne...35..151M. doi:10.1016/j.renene.2009.02.031. hdl:10400.22/1585. ISSN 0960-1481.
  9. ^ Omu, Akomeno; Choudhary, Ruchi; Boies, Adam (2013-10-01). "Distributed energy resource system optimisation using mixed integer linear programming". Energy Policy. 61: 249–266. Bibcode:2013EnPol..61..249O. doi:10.1016/j.enpol.2013.05.009. ISSN 0301-4215. S2CID 29369795.
  10. ^ Schouwenaars, T.; Valenti, M.; Feron, E.; How, J. (2005). "Implementation and Flight Test Results of MILP-based UAV Guidance". 2005 IEEE Aerospace Conference. pp. 1–13. doi:10.1109/AERO.2005.1559600. ISBN 0-7803-8870-4. S2CID 13447718.
  11. ^ Radmanesh, Mohammadreza; Kumar, Manish (2016-03-01). "Flight formation of UAVs in presence of moving obstacles using fast-dynamic mixed integer linear programming". Aerospace Science and Technology. 50: 149–160. Bibcode:2016AeST...50..149R. doi:10.1016/j.ast.2015.12.021. ISSN 1270-9638.
  12. ^ Bast, Hannah; Brosi, Patrick; Storandt, Sabine (2017-10-05). "Efficient Generation of Geographically Accurate Transit Maps". arXiv:1710.02226 [cs.CG].
  13. ^ Scarf, Herbert E. (1981). "Production Sets with Indivisibilities, Part I: Generalities". Econometrica. 49 (1): 1–32. doi:10.2307/1911124. ISSN 0012-9682. JSTOR 1911124.
  14. ^ a b c Lenstra, H. W. (1983-11-01). "Integer Programming with a Fixed Number of Variables". Mathematics of Operations Research. 8 (4): 538–548. CiteSeerX 10.1.1.431.5444. doi:10.1287/moor.8.4.538. ISSN 0364-765X.
  15. ^ Amenta, Nina; De Loera, Jesús A.; Soberón, Pablo (2017). "Helly's theorem: new variations and applications". In Harrington, Heather A.; Omar, Mohamed; Wright, Matthew (eds.). Proceedings of the AMS Special Session on Algebraic and Geometric Methods in Applied Discrete Mathematics held in San Antonio, TX, January 11, 2015. Contemporary Mathematics. Vol. 685. Providence, Rhode Island: American Mathematical Society. pp. 55–95. arXiv:1508.07606. doi:10.1090/conm/685. ISBN 9781470423216. MR 3625571.
  16. ^ Kannan, Ravi (1987-08-01). "Minkowski's Convex Body Theorem and Integer Programming". Mathematics of Operations Research. 12 (3): 415–440. doi:10.1287/moor.12.3.415. ISSN 0364-765X. S2CID 495512.
  17. ^ Goemans, Michel X.; Rothvoss, Thomas (2020-11-07). "Polynomiality for Bin Packing with a Constant Number of Item Types". Journal of the ACM. 67 (6): 38:1–38:21. doi:10.1145/3421750. hdl:1721.1/92865. ISSN 0004-5411. S2CID 227154747.
  18. ^ Frank, András; Tardos, Éva (1987-03-01). "An application of simultaneous diophantine approximation in combinatorial optimization". Combinatorica. 7 (1): 49–65. doi:10.1007/BF02579200. ISSN 1439-6912. S2CID 45585308.
  19. ^ Bliem, Bernhard; Bredereck, Robert; Niedermeier, Rolf (2016-07-09). "Complexity of efficient and envy-free resource allocation: few agents, resources, or utility levels". Proceedings of the Twenty-Fifth International Joint Conference on Artificial Intelligence. IJCAI'16. New York, New York, USA: AAAI Press: 102–108. ISBN 978-1-57735-770-4.
  20. ^ Bredereck, Robert; Kaczmarczyk, Andrzej; Knop, Dušan; Niedermeier, Rolf (2019-06-17). "High-Multiplicity Fair Allocation: Lenstra Empowered by N-fold Integer Programming". Proceedings of the 2019 ACM Conference on Economics and Computation. EC '19. Phoenix, AZ, USA: Association for Computing Machinery. pp. 505–523. doi:10.1145/3328526.3329649. ISBN 978-1-4503-6792-9. S2CID 195298520.
  21. ^ Dadush, Daniel (2012-06-14). "Integer Programming, Lattice Algorithms, and Deterministic Volume Estimation.
  22. ^ Reis, Victor; Rothvoss, Thomas (2023-03-26). "The Subspace Flatness Conjecture and Faster Integer Programming".
  23. ^ a b Hildebrand, Robert (2016-10-07). "FPT algorithm for mixed integer program". Theoretical Computer Science Stack Exchange. Retrieved 2024-05-21.
  24. ^ Glover, F. (1989). "Tabu search-Part II". ORSA Journal on Computing. 1 (3): 4–32. doi:10.1287/ijoc.2.1.4. S2CID 207225435.
  25. ^ Koutecký, Martin; Levin, Asaf; Onn, Shmuel (2018). "A parameterized strongly polynomial algorithm for block structured integer programs". In Chatzigiannakis, Ioannis; Kaklamanis, Christos; Marx, Dániel; Sannella, Donald (eds.). 45th International Colloquium on Automata, Languages, and Programming, ICALP 2018, July 9–13, 2018, Prague, Czech Republic. LIPIcs. Vol. 107. Schloss Dagstuhl – Leibniz-Zentrum für Informatik. pp. 85:1–85:14. arXiv:1802.05859. doi:10.4230/LIPICS.ICALP.2018.85.

Further reading

edit
edit