Intermediate-frequency amplifier

Intermediate-frequency (IF) amplifiers are amplifier stages used to raise signal levels in radio and television receivers, at frequencies intermediate to the higher radio-frequency (RF) signal from the antenna and the lower (baseband) audio or video frequency that the receiver is recovering.^[1]

Uses edit

IF amplifiers in heterodyne receivers apply gain in a frequency band between the input radio frequency and output audio frequency or video frequency, often following one stage of RF amplifier. This allows most of the gain in the form of a fixed-frequency amplifier, simplifying tuning. Compare to its predecessor, the tuned RF receiver. IF amplifiers might use double-tuned amplifiers or staggered tuning to generate the appropriate frequency response needed. Some use more than one IF frequency.

Commonly used circuits edit

Mutual inductance coupling: contains two windings that are joined by mutual inductance.
Shunt capacitance coupling: These circuits have a wide pass band.
composite IF transformers: receivers used for A-M and F-M receivers.^[2]^[3]

References edit

^ Walker, H. R. (2005). "Intermediate-Frequency Amplifiers". Encyclopedia of RF and Microwave Engineering. doi:10.1002/0471654507.eme187. ISBN 978-0471654506.
^ Sandel, B. "Intermediate Frequency Amplifiers" (PDF). frank.yueksel.org/. Retrieved November 28, 2013.
^ "The Art of Alignment". www.vintage-radio.net. Retrieved 27 January 2019.

External links edit

Media related to IF amplifiers at Wikimedia Commons

[1] Walker, H. R. (2005). "Intermediate-Frequency Amplifiers". Encyclopedia of RF and Microwave Engineering. doi:10.1002/0471654507.eme187. ISBN 978-0471654506.

[2] Sandel, B. "Intermediate Frequency Amplifiers" (PDF). frank.yueksel.org/. Retrieved November 28, 2013.

[artofalignment-3] "The Art of Alignment". www.vintage-radio.net. Retrieved 27 January 2019.

[1]

[2]

[3]