getaddrinfo

(Redirected from Getnameinfo)

In C programming, the functions getaddrinfo() and getnameinfo() convert domain names, hostnames, and IP addresses between human-readable text representations and structured binary formats for the operating system's networking API. Both functions are contained in the POSIX standard application programming interface (API).[1]

getaddrinfo and getnameinfo are inverse functions of each other. They are network protocol agnostic, and support both IPv4 and IPv6. It is the recommended interface for name resolution in building protocol independent applications and for transitioning legacy IPv4 code to the IPv6 Internet.

Internally, the functions may use a variety of resolution methods not limited to the Domain Name System (DNS). The Name Service Switch is commonly used on Unix-like systems and affects most implementation of this pair as it did with their BSD-socket era predecessors.[2]

struct addrinfo

edit

The C data structure used to represent addresses and hostnames within the networking API is the following:

struct addrinfo {
    int       ai_flags;
    int       ai_family;
    int       ai_socktype;
    int       ai_protocol;
    socklen_t ai_addrlen;
    struct    sockaddr* ai_addr;
    char*     ai_canonname;      /* canonical name */
    struct    addrinfo* ai_next; /* this struct can form a linked list */
};

In some older systems the type of ai_addrlen is size_t instead of socklen_t. Most socket functions, such as accept() and getpeername(), require the parameter to have type socklen_t * and programmers often pass the address to the ai_addrlen element of the addrinfo structure. If the types are incompatible, e.g., on a 64-bit Solaris 9 system where size_t is 8 bytes and socklen_t is 4 bytes, then run-time errors may result.

The structure contains structures ai_family and sockaddr with its own sa_family field. These are set to the same value when the structure is created with function getaddrinfo in some implementations.

getaddrinfo()

edit

getaddrinfo() converts human-readable text strings representing hostnames or IP addresses into a dynamically allocated linked list of struct addrinfo structures. The function prototype for this function is specified as follows:

int getaddrinfo(const char* hostname,
                const char* service,
                const struct addrinfo* hints,
                struct addrinfo** res);
hostname
can be either a domain name, such as "example.com", an address string, such as "127.0.0.1", or NULL, in which case the address 0.0.0.0 or 127.0.0.1 is assigned depending on the hints flags.
service
can be a port number passed as string, such as "80", or a service name, e.g. "echo". In the latter case a typical implementation uses getservbyname() to query the file /etc/services to resolve the service to a port number.
hints
can be either NULL or an addrinfo structure with the type of service requested.
res
is a pointer that points to a new addrinfo structure with the information requested after successful completion of the function.[3] The function returns 0 upon success and non-zero error value if it fails.[1]

Although implementations vary among platforms, the function first attempts to obtain a port number usually by branching on service. If the string value is a number, it converts it to an integer and calls htons(). If it is a service name, such as www, the service is looked up with getservbyname(), using the protocol derived from hints->ai_socktype as the second parameter to that function. Then, if hostname is given (not NULL), a call to gethostbyname() resolves it, or otherwise the address 0.0.0.0 is used, if hints->ai_flags is set to AI_PASSIVE, and 127.0.0.1 otherwise. It allocated a new addrinfo structure filled with the appropriate sockaddr_in in one of these conditions and also adds the port retrieved at the beginning to it. Finally, the **res parameter is dereferenced to make it point to a newly allocated addrinfo structure.[4] In some implementations, such as the Unix version for Mac OS, the hints->ai_protocol overrides the hints->ai_socktype value while in others it is the opposite, so both need to be defined with equivalent values for the code to be work across multiple platforms.

freeaddrinfo()

edit

This function frees the memory allocated by function getaddrinfo(). As the result of the latter is a linked list of addrinfo structures starting at the address ai, freeaddrinfo() loops through the list and frees each one in turn.

void freeaddrinfo(struct addrinfo *ai);

getnameinfo()

edit

The function getnameinfo() converts the internal binary representation of an IP address in the form of a pointer to a struct sockaddr into text strings consisting of the hostname or, if the address cannot be resolved into a name, a textual IP address representation, as well as the service port name or number. The function prototype is specified as follows:

int getnameinfo(const struct sockaddr* sa, socklen_t salen,
                char* host, size_t hostlen,
                char* serv, size_t servlen,
                int flags);

Example

edit

The following example uses getaddrinfo() to resolve the domain name www.example.com into its list of addresses and then calls getnameinfo() on each result to return the canonical name for the address. In general, this produces the original hostname, unless the particular address has multiple names, in which case the canonical name is returned. In this example, the domain name is printed three times, once for each of the three results obtained.

#include <stdio.h>
#include <stdlib.h>
#include <netdb.h>
#include <netinet/in.h>
#include <sys/socket.h>

#ifndef   NI_MAXHOST
#define   NI_MAXHOST 1025
#endif

int main(void)
{
    struct addrinfo* result;
    struct addrinfo* res;
    int error;

    /* resolve the domain name into a list of addresses */
    error = getaddrinfo("www.example.com", NULL, NULL, &result);
    if (error != 0) {   
        if (error == EAI_SYSTEM) {
            perror("getaddrinfo");
        } else {
            fprintf(stderr, "error in getaddrinfo: %s\n", gai_strerror(error));
        }   
        exit(EXIT_FAILURE);
    }

    /* loop over all returned results and do inverse lookup */
    for (res = result; res != NULL; res = res->ai_next) {   
        char hostname[NI_MAXHOST];
        error = getnameinfo(res->ai_addr, res->ai_addrlen, hostname, NI_MAXHOST, NULL, 0, 0); 
        if (error != 0) {
            fprintf(stderr, "error in getnameinfo: %s\n", gai_strerror(error));
            continue;
        }
        if (*hostname != '\0')
            printf("hostname: %s\n", hostname);
    }

    freeaddrinfo(result);
    return 0;
}

Security

edit

On February 16, 2016, a security bug was announced in the glibc implementation of getaddrinfo(), using a buffer overflow technique, that may allow execution of arbitrary code by the attacker.[5]

See also

edit

References

edit
  1. ^ a b "freeaddrinfo, getaddrinfo - get address information". The Open Group Base Specifications Issue 7, 2018 edition (POSIX.1-2017). The Open Group. Retrieved 2022-03-05.
  2. ^ "nss - man pages section 5: File Formats". docs.oracle.com.
  3. ^ Stevens R., Fenner, Rudoff [2003] UNIX® Network Programming Volume 1, Third Edition: The Sockets Networking API. Publisher: Addison-Wesley Professional. Pub. Date: November 14, 2003 p. 256
  4. ^ Hajimu UMEMOTO [2000] getaddrinfo.c Accessed from: https://opensource.apple.com/source/passwordserver_sasl/passwordserver_sasl-14/cyrus_sasl/lib/getaddrinfo.c
  5. ^ "CVE-2015-7547: Glibc getaddrinfo stack-based buffer overflow".
edit