Wikipedia

File:Ball and socket ground glass joints.svg

Original file ‎(SVG file, nominally 425 × 105 pixels, file size: 1 KB)

Summary

Description
English: Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the socket joint to join attached tubular sections of glass together. H Padleckas created this image file in April 2006 especially for use in the article "Laboratory glassware" in Wikimedia. H Padleckas 13:29, 27 May 2006 (UTC)
Date 27 May 2006 (original upload date), 2019-04-15 (vectorized)
Source File:Ball_and_socket_ground_glass_joints.PNG, vectorized by GKFXtalk.
Author H Padleckas, vectorized by GKFXtalk
Permission
(Reusing this file)
I, the copyright holder of this work, hereby publish it under the following licenses:
GNU head Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.
w:en:Creative Commons
attribution share alike 		This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This licensing tag was added to this file as part of the GFDL licensing update.
You may select the license of your choice.
Other versions

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

MIME type

image/svg+xml

checksum

023292913cbbd3b529c91928c37ad68a7b230850

determination method: SHA-1

data size

1,434 byte

height

105 pixel

width

425 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:41, 15 April 2019Thumbnail for version as of 12:41, 15 April 2019425 × 105 (1 KB)GKFX{{Information |description ={{en|1=Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the soc...
The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Global file usage

The following other wikis use this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://en.wikipedia.org/wiki/File:Ball_and_socket_ground_glass_joints.svg"